Tiling cost per sqm: 2022 Tile Installation Costs | Tile Floor Prices Per Square Foot
2022 Tile Installation Costs | Tile Floor Prices Per Square Foot
Tile Installation Cost
The average cost to install tile flooring is $10 to $15 per square foot with most homeowners spending between $825 and $2,520 for porcelain or ceramic tiling. Tiling a shower or bathroom walls run from $7 to $25 per square foot, while installing a tile backsplash costs $23 to $35 per square foot.
National Average Cost | $1,672 |
Minimum Cost | $300 |
Maximum Cost | $4,929 |
Average Range | $825 to $2,520 |
For all tiling projects, your materials cost $3 to $10 per square foot, while labor ranges from $5 to $14 per square foot. Your final price depends on which room(s) you are having tiled and the resulting total square footage, as well as the quality and size of tile being used.
Project | Average Cost |
---|---|
200 Square Foot Floor | $2,200 – $3,400 |
80 Square Foot Shower Walls | $520 – $2,000 |
30 Square Foot Backsplash | $690 – $1,250 |
72 Square Foot Countertops | $2,756 – $4,929 |
Table Of Contents
- Tile Installation Cost
- Cost Per Square Foot
- Labor Cost To Install
- Kitchen Floor
- Bathroom Floor
- Bathroom Walls
- Backsplash
- Kitchen Countertops
Tile Installation Cost Per Square Foot
On average, tile installation costs $10 to $15 per square foot depending on your location and local labor rates. Also, prices will vary drastically depending on whether you’re installing a floor, backsplash, shower walls, or countertops. If your project requires backer board to provide a firm, even surface, add $6 per square foot to your total cost.
Type of Tile | Tile Cost (SF) | Labor Cost (SF) | Total Cost (SF) |
---|---|---|---|
Ceramic | $2 | $5 – $12 | $7 – $14 |
Encaustic Cement | $2 | $5 – $12 | $7 – $14 |
Slate | $3 | $5 – $12 | $8 – $15 |
Quartzite | $5 | $6 – $13 | $11 – $18 |
Porcelain | $6 | $6 – $13 | $12 – $19 |
Travertine | $6 | $7 – $14 | $13 – $20 |
Natural stone | $6 | $7 – $14 | $13 – $20 |
Marble | $8 | $7 – $14 | $15 – $24 |
When purchasing tile, allow for a buffer of an extra 10% to account for breakage as well as cutting waste.
Labor Cost To Install Tile Per Square Foot
The average labor costs to install tile ranges from $4 to $8 per square foot when setting the counter, wall and floor tile in adhesive, and $7 to $14 per square foot when setting in a thin-set mortar with backer board. Your price depends on the size and type of tiles installed. Smaller 4-1/4″ glazed tiles cost 10% more to install than 8″ tiles. Labor rates to install marble, granite or stone tile runs on the higher end at $12 to $14 per square foot, while ceramic tiles range from $4 to $8 per square foot.
Return to Top
Cost To Install Tile Floor
The average cost to install ceramic tile flooring is $7 to $14 per square foot, whereas porcelain tile ranges from $12 to $19 per square foot. Tile installation in a medium-sized bathroom will cost $563 to $1,125 and $1,610 to $2,415 in a average-sized kitchen. Your final can vary based on local labor rates.
Tile Flooring Cost Per Square Foot
Tile flooring costs range between $7 and $24 per square foot with most homeowners spending $10 to $15 per square foot. The lowest cost floors are ceramic at an average cost of $10 per square foot, while marble floors will be $20 per square foot or more.
While there are many high-traffic areas inside and outside the home, the kitchen and bathroom are the two most common areas for tile installation, with hallways and laundry rooms coming third and fourth.
Cost To Tile Kitchen Floor
The average cost to tile a kitchen floor is $975 to $1,950 for a small 130 SF area, $1,208 to $2,415 for an average 161 SF kitchen, and $1,380 to $2,760 for a large 184 SF kitchen.
Tile Type | Small (130 SF) | Average (161 SF) | Large (184 SF) |
---|---|---|---|
Ceramic | $975 | $1,208 | $1,380 |
Encaustic Cement | $975 | $1,208 | $1,380 |
Slate | $1,040 | $1,288 | $1,472 |
Quartzite | $1,430 | $1,771 | $2,024 |
Porcelain | $1,560 | $1,932 | $2,208 |
Travertine | $1,755 | $2,174 | $2,484 |
Natural Stone | $1,755 | $2,174 | $2,484 |
Marble | $1,950 | $2,415 | $2,760 |
Cost To Tile Bathroom Floor
The average cost to tile a bathroom floor is $300 to $600 for a small 40 SF area, $563 to $1,125 for an average 75 SF bathroom, and $1,200 to $2,400 for a large 160 SF bathroom.
Tile Type | Small (40 SF) | Average (75 SF) | Large (160 SF) | Huge (210+ SF) |
---|---|---|---|---|
Ceramic | $300 | $563 | $1,200 | $1,575 |
Encaustic Cement | $300 | $563 | $1,200 | $1,575 |
Slate | $320 | $600 | $1,280 | $1,680 |
Quartzite | $440 | $825 | $1,760 | $2,310 |
Porcelain | $480 | $900 | $1,920 | $2,520 |
Travertine | $540 | $1,013 | $2,160 | $2,835 |
Natural Stone | $540 | $1,013 | $2,160 | $2,835 |
Marble | $600 | $1,125 | $2,400 | $3,150 |
Return to Top
Porcelain Vs. Ceramic Tile Cost
The two most common tile materials used in homes are ceramic tile and porcelain tile. To install ceramic tile, expect to pay between $7 to $14 per square foot compared to porcelain at $12 to $19 per square foot for both labor and materials. Both are clay-based products that are shaped in a mold, dried, and sometimes glazed. Because of the similarities, one topic that comes up repeatedly is whether I should use ceramic or porcelain tiles?
Type of Tile | Tile Cost (SF) | Labor Cost (SF) | Total Cost (SF) |
---|---|---|---|
Ceramic | $2 | $5 – $12 | $7 – $14 |
Porcelain | $6 | $6 – $13 | $12 – $19 |
Before making your final decision between ceramic and porcelain tile, you need to look at its Porcelain Enamel Institute (PEI) Wear Rating. Tiles are rated from 1 to 5, which indicates their suitability in different areas, depending on the amount of traffic. Tiles with a PEI Wear Rating of 1 or 2 should only be used for walls, such as a bathroom or backsplash. Experts recommend a rating of 3 to 5 for moderate to heavy traffic applications like interior floors and countertops.
Porcelain Tile Installation Cost
Porcelain tile installation costs $12 to $19 per square foot and is usually about 50% more expensive than ceramic tiling. Because of porcelain tiles’ ability to resist stains and keep moisture at bay, they are typically installed in areas where there is a lot of moisture such as:
- Bathrooms walls, bathroom floors, shower stalls
- Around sinks, around stoves, as a backsplash
- In laundry rooms
Porcelain is an extremely hard and dense material. As a result, porcelain tiles can withstand heavy traffic better, and for longer than ceramic tiles. Also, they can also withstand freezing temperatures without cracking because they absorb little to no water. Porcelain tiles are available in matte, textured, gloss, semi-gloss, unglazed, and glazed forms. Because of the tougher nature of porcelain, it is a lot tougher to cut, which explains some of its higher cost.
Ceramic Tile Installation Cost
Ceramic tile installation costs between $7 and $14 per square foot on average which is almost half the price of porcelain tiling. The ceramic tiles alone cost $1 to $3 per square foot and are likely to be used in high-traffic areas, like a hallway. Like porcelain, it will remain colorfast, even with repeated exposure to direct sunlight in our hottest states. While also strong, moisture resistant, stain resistant, and long lasting, ceramic tile doesn’t score quite as high as porcelain.
Ceramic tiles will always have a white, tan, or red base with a color glaze on top, which will be exposed if a deep enough chip comes loose. Tiles with a highly effective finish can be slippery and should be avoided as floor tiles.
Return to Top
Cost To Install Tile Shower
The average cost to install tile in a shower is $8 to $40 per square foot, depending on the size, material, design, and labor. The cost to tile a walk-in shower is $800 to $3,000. Large walk-in showers or high-end tile costs up to $10,000 to retile.
Showers are normally built in either a square or a rectangular shape since most homeowners are installing a premanufactured shower base and not tiling the floor of the shower. The chart below includes prices for two walls tiled where there are one glass wall and one glass door, and three walls tiled where there is only one glass door.
Shower Size | 32″ x 96″ | 42″ x 96″ | 60″ x 96″ | |||
---|---|---|---|---|---|---|
Number of Walls | 2 walls | 3 walls | 2 walls | 3 walls | 2 walls | 3 walls |
Shower Size | 42 SF | 62 SF | 56 SF | 84 SF | 80 SF | 120 SF |
Glazed Ceramic | $270 | $406 | $364 | $546 | $520 | $780 |
Slate | $333 | $499 | $448 | $672 | $640 | $960 |
Porcelain | $499 | $749 | $672 | $1,008 | $960 | $1,440 |
Natural Stone | $562 | $842 | $756 | $1,134 | $1,080 | $1,620 |
Glass | $1,040 | $1,560 | $1,400 | $2,100 | $2,000 | $3,000 |
Tile Shower Cost Per Square Foot
The average cost to tile a shower is $7 per square foot for glazed ceramic, $12 per square foot for porcelain tiling, and around $25 per square foot for glass. For smaller showers, you can make it look bigger by using glass tiles, lighter colors, larger tiles, and simple or plain designs.
Type of Tile | Cost Per Square Foot |
---|---|
Glazed Ceramic | $7 |
Slate | $8 |
Porcelain | $12 |
Natural Stone | $14 |
Glass | $25 |
Cost To Install Tile Shower Pan
The average cost to install a tile shower pan is $800 to $3,000 for materials and professional labor.
Cost To Tile A Tub Surround
The average cost to tile a tub surround is $1,000 to $3,500 or between $12 and $35 per square foot for both materials and professional installation. Another option is to install a pre-built tub or shower surround with prices ranging from $200 to $800.
Cost To Tile Bathroom Walls
The average cost to tile bathroom walls is between $7 and $25 per square foot. The typical bathroom is 5 feet by 8 feet, and if one wall is covered in cabinets and another wall has a bath or shower with its own tiles, the average cost for tiling the remaining two bathroom walls is $1,690 with prices ranging from $780 to $2,600. Cement backer board will also need to be installed behind bathroom tiles, and each 5’ by 3’ sheet averages $11.50 for the materials.
5′ & 8′ wall | 9.3′ & 8′ wall | 20′ & 8′ wall | 26.5′ & 8′ wall | ||
---|---|---|---|---|---|
Type of Tile | $ Per SF | 104 SF | 138.4 SF | 224 SF | 274 SF |
Glazed Ceramic | $7.50 | $780 | $1,038 | $1,680 | $2,055 |
Slate | $8 | $832 | $1,107 | $1,792 | $2,192 |
Porcelain | $12 | $1,248 | $1,661 | $2,688 | $3,288 |
Natural stone | $13. 50 | $1,404 | $1,868 | $3,024 | $3,699 |
Marble | $22 | $2,288 | $3,045 | $4,928 | $6,028 |
Glass | $25 | $2,600 | $3,460 | $5,600 | $6,850 |
In this category, marble will have the widest range of material costs depending on the quality of marble and where it is from, with prices ranging from $2 to $28 per square foot for materials alone.
Return to Top
Labor Cost To Install Tile
The labor costs for tile installation ranges from $5 to $14 per square foot depending on the type of tile and where it’s being installed. Tile flooring installation costs $5 to $14 per square foot, compared to $20 to $35 per square foot for backsplashes and countertops. If you purchased the materials your self, and are looking to hire a pro by the hour, expect to pay between $57 and $93 per hour. The larger the tile, the faster the installation, and the labor will cost slightly less.
Average Cost To Lay Tile
If there is already a subfloor in good, usable condition, then the cost to lay tile ranges from $7 to $15 per square foot for flooring. However, if the subfloor needs to be repaired or replaced, then you can expect to pay an additional $2.10 per square foot, which could add another $450 to $600 to your project cost. Also, the size and type of tiles being installed will affect your final price.
Cost To Install Tile Backsplash
The cost to install a tile backsplash in your kitchen will range from $23 to $35 per square foot depending on the materials you select. Tile backsplash installation prices range from $460 to $1,400 with most homeowners spending between $600 and $1,200. Your rate depends on the amount of square footage to be tiled, the type of tile being used.
Tile Type | Cost (SF) | 20 SF | 30 SF | 40 SF |
---|---|---|---|---|
Ceramic | $23 | $460 | $690 | $920 |
Porcelain | $26 | $520 | $780 | $1,040 |
Travertine | $30 | $600 | $900 | $1,200 |
Natural Stone | $30 | $600 | $900 | $1,200 |
Marble | $30 | $600 | $900 | $1,200 |
Glass | $32 | $640 | $960 | $1,280 |
Copper | $35 | $700 | $1,050 | $1,400 |
Stainless Steel | $35 | $700 | $1,050 | $1,400 |
These prices are for a straightforward rectangular wall without any complexities like going around corners, or other custom design features.
Kitchen Countertop Tile Cost
The cost to install tile countertops in the kitchen ranges from $31 to $93 per square foot on average. Quartz and Granite tile countertops cost $70 per square foot on average, while laminate is around $31 per square foot.
Type | Installed Cost (SF) | Small Kitchen (13 LF/30 SF) |
Medium Kitchen (24 LF/53 SF) |
Large Kitchen (30 LF/66 SF) |
---|---|---|---|---|
Laminate | $31 | $930 | $1,643 | $2,046 |
Solid Surface | $52 | $1,560 | $2,756 | $3,432 |
Quartz | $70 | $2,100 | $3,710 | $4,620 |
Granite | $70 | $2,100 | $3,710 | $4,620 |
Marble | $87 | $2,610 | $4,611 | $5,742 |
Quartzite | $89 | $2,670 | $4,717 | $5,874 |
Dekton | $93 | $2,790 | $4,929 | $6,138 |
Subway Tile Per Square Foot
Subway tile is normally sold as a white, glazed ceramic tile measuring 3” by 6”. The average cost is around $13 per square foot. Subway tile became popular after it was installed in the New York subway stations in the early 1900s.
Heated Tile Floor Cost
The national average cost to install heated tile flooring is $4.75 to $7.25 per square foot with most homeowners spending $6 per square foot on average. With a typical 5′ x 8′ bathroom of 40 square feet, radiant heated floors cost $300 to $700.
Return to Top
Tile Cost Calculator
For the tile materials alone, costs range from $1 to $26 per square foot with most homeowners paying $2 to $6 per square foot on average. Prices below are for material costs only.
Type of Tile | Cost Per Square Foot |
---|---|
Ceramic | $1 – $3 |
Porcelain | $3 – $8 |
Wood-Look | $1 – $10 |
Vinyl | $1 – $3 |
Stone | $5 – $12 |
Glass | $12 – $26 |
Resilient Tile | $1 – $7 |
Rectified Tile | $1 – $6 |
Wood-Look Tile Cost
Wood-look tile made of ceramic or porcelain costs $0. 77 to $9.99 per square foot. Wood-look tile is manufactured to mimic the beauty of wood planks and to provide the strength and low maintenance of a tiled surface. It’s available in a limitless range of colors and finishes like ash, oak, walnut, redwood, chestnut, pecan, and more.
Stone Tile Installation Cost
Prices for natural stone can range from $5 to $12 per square foot, but most homeowners can expect to pay around $7 per square foot. Products that fall into this category include basalt, clay, granite, limestone, marble, onyx, pebble, sandstone, slate, and travertine.
Cost To Install Vinyl Tile Flooring
Vinyl tiles are available from plain white to a range of colors, as well as wood and stone patterns. Being both the most affordably priced at $0.41 to $3 per square foot, and a durable walking surface, making them very popular. Vinyl planks range from $0.97 to $5 per square foot and include a diverse range of colors and wood looks, along with grain texture.
Glass Tile Cost
Usually, the color options for glass tiles represent earth tones including red, blue, gray, green, brown, and yellow, and the price for a 12” by 12” tile can range from $12 to $26. Glass tiles are not just available in clear glass, or as a single tile. Many manufacturers produce 12” by 12” tiles that are made up of uniform or random sizes and shapes, giving the appearance of a brick wall structure. While with the right ratings they can be used for flooring, but they are generally installed on walls and backsplash.
Rectified Tiles Cost
Rectified tiles are ceramic or porcelain tiles that have a more precise measurement, and it is a more suitable tile if installing tile larger than 15” along with any side, and when you want minimal grout space between the tiles. The cost for rectified tile is between $1 and $6, but add $0.50 per square foot for a leveling system, and the extra labor cost for a slower installation time can add up.
Resilient Floor Tile (Vinyl, Linoleum, Cork, Rubber)
Resilient flooring is the name of a category of tile that despite being durable, possesses an elastic nature and can restore its shape. They are commonly made from vinyl (sold as tiles and as imitation wood planks), cork, and linoleum, and prices run from $1 to $7 per square foot.
- Linoleum tiles are a combination of renewable elements including linseed oils, tree resins, cork powders, jute, and wood flours. Instead of using an image layer, the design permeates the entire product. Averaging around $4 per square foot, it is typically $1 more per square foot than vinyl.
- Cork flooring tiles which run from $1 to $5.50 per square foot, provide the fewest design options, but variations in the granule size include small, medium, large, and burled for a more organic look. It can be painted or stained to give homeowners more choice, and it is also available in tiles and planks.
- Rubber flooring tile costs $9 per square foot on average, and it’s the option you will generally see the least often in a home. With its inherent shock-absorbing characteristics and its more muted or commercial look, it is something more typically suited to a garage floor or a home gym than it is for a kitchen or bathroom.
How To Measure For Your Tile Project
For a flooring project in a straightforward rectangular room, measuring the length of the room by the width of the room will give you your overall square footage of tile needed. If there are complicated areas, sketch a diagram of the room, organize the floorplan into blocks, and note the dimensions of each logical block. That will give your installer a rough idea of what is needed. If you are using 12” by 12” tiles, the tiles needed will be easy enough to install; however, a bit more planning is required if you are using 2 or 3 different sizes of tile.
Additional Cost Considerations
Unless you are tiling a brand-new house, it would be normal to expect additional costs.
- Remove Old Floors – Old flooring might need to be taken up first to lay the tile. If this is the case, that will cost an average of $3.36 per square foot.
- Concrete Repair – Concrete floors might need to be repaired. The surface needs to be completely flat at the cost of around $3 per square foot.
- Subfloor – If the concrete is too damaged, your contractor may instead install a subfloor for $2.10 per square foot before installing your new tile floor.
- Subfloor Repairs – If there is already a subfloor in place and it needs some repairs before the tile goes in, you can expect to pay between $37 to $56 per square foot for repairs.
- Backing Board – If the tile is going into a bathroom or any area that will experience moisture daily, a concrete backing board will need to be installed, and that will usually cost around $6 per square foot.
Cost Of Backer Board For Tile
Backerboard materials cost an average of $11.50 for one sheet of 5’ by 3’, and another $5 per square foot to install, which translates to $6 per square foot total.
Item | Small Bathroom | Medium Bathroom | Large Bathroom | Huge Bathroom |
---|---|---|---|---|
Total SF to Tile 2 walls 8’ High | 104 SF | 138 SF | 224 SF | 274 SF |
Boards needed @$11.50 each | 7 | 10 | 15 | 19 |
Boards Cost | $81 | $115 | $173 | $219 |
Labor @ $5/SF | $520 | $692 | $1,120 | $1,370 |
Total | $601 | $807 | $1,293 | $1,589 |
Return to Top
Price Of Installing Tile Over Existing Flooring
A professional contractor will always remove the existing flooring first before installing new tile. The cost to remove the old flooring averages $3.36 per square foot.
Cost to Remove and Retile a Floor
Tile replacement costs $5 to $8 per square foot in labor. You will also need to replace the backer board at an average cost of $6 per square foot in addition to the tile materials.
Type of Tile | Remove and Retile Cost (SF) | 10’x10’ | 12’x12’ | 12’x24’ | 24’x24’ | 30’x30’ | 38’x38’ |
---|---|---|---|---|---|---|---|
Ceramic | $10.86 | $1,086 | $1,564 | $3,128 | $6,255 | $9,774 | $15,682 |
Encaustic Cement | $10.86 | $1,086 | $1,564 | $3,128 | $6,255 | $9,774 | $15,682 |
Slate | $11.36 | $1,136 | $1,636 | $3,272 | $6,543 | $10,224 | $16,404 |
Quartzite | $14. 36 | $1,436 | $2,068 | $4,136 | $8,271 | $12,924 | $20,736 |
Porcelain | $15.36 | $1,536 | $2,212 | $4,424 | $8,847 | $13,824 | $22,180 |
Travertine | $16.86 | $1,686 | $2,428 | $4,856 | $9,711 | $15,174 | $24,346 |
Natural Stone | $16.86 | $1,686 | $2,428 | $4,856 | $9,711 | $15,174 | $24,346 |
Marble | $18.36 | $1,836 | $2,644 | $5,288 | $10,575 | $16,524 | $26,512 |
Cost to Lay Tile on Concrete
The average cost to lay tile on concrete is $5 to $7 per square foot. It is very unusual to take up any flooring and find a pristine concrete surface, and you’ll need to make the surface completely flat at a repair cost of around $3 per square foot. If there is minimal damage to the concrete, the holes can be patched and the resulting surface buffed to level off with the surrounding surface. If there is too much damage to the concrete, a new subfloor could be installed on the concrete for $2.10 per square foot.
Cost to Remove Wall Tiles
The following is a table showing the price to remove tiles at $3.36 per square foot from three walls, assuming one wall has cabinets on it.
Wall Size | 5’x8′ | 9.3’x8′ | 20’x8′ | 26.5’x8′ |
---|---|---|---|---|
Total SF of 3 walls 8’ high | 168 SF | 202 SF | 288 SF | 338 SF |
Tile removal @$3.36/SF | $564 | $679 | $968 | $1,136 |
Return to Top
Outdoor Tiling Estimator
Outdoor tiles can cost anywhere from $1. 50 to $28 each depending on the materials you choose, plus an average of $9 per square foot for the installation. To estimate the cost of your outdoor tiling project:
- Tile cost by SF x SF of project + 10% of SF (cutting waste) = tile cost
- SF of project x an average $11/SF labor cost = labor cost
- Add the tile cost and labor cost to get your total estimate.
A professional tile installation contractor will be able to suggest the best materials for your outdoor area. Such as tile that’s safe to walk on in wet conditions and that will survive freezing temperatures. If you are buying the tile yourself, be sure to check the section that details the rating system found on tile box labels. It will need to be rated for freezing conditions unless you live somewhere that doesn’t get extreme cold conditions, and it will need to have the appropriate water absorption rating.
Slip-Resistant Tiles
To pick the right level of slip resistance in your tile, check the tile’s COF rating. Prices for slip-resistant tiles range from $2 to $19.50 per square foot, and the extra treatment in the surface could either be something like a grid of grooves, or an engrained wood grain finish, like Shadow Wood from Lifeproof, which has a COF > 0.60 and is suitable for both indoor or outdoor installations. Another option is vinyl tiles which have a textured surface that mimics stone. Slip-resistant tiles are not going to be a high-gloss or polished walking surface but will have more of a matte finish.
Laying Porcelain Pavers Cost
Outdoor porcelain pavers range in cost from $5 to $38 per square foot. If the area is likely to get wet often, and the area is subject to freezing temperatures in the winter months, in addition to the COF rating, it should also have the appropriate WA rating to ensure that the tile does not absorb a lot of water that could freeze, causing the tiles to crack.
Outdoor Decking Tile
Between their ease of installation with a snap-lock mechanism for many brands, along with eco-friendly materials and rot resistance, and a price point is between $4. 50 and $15 per 1’ by 1’ tile. If you have an older deck that is still in good condition from a structural perspective, but it has gone beyond repair concerning its appearance, you can install deck tiles on top of the original deck without tearing it up.
Return to Top
DIY Vs. Hiring a Tile Installer
The savings from doing a tile installation yourself may not be as significant you might expect. You may save on the project cost line item when it comes to contractor labor, but they already have all the right tools, and will have a lot less waste tile from bad cuts than you will. They’ll also install it much faster at a higher quality, at a cost slightly higher than you can do yourself.
Another downside is the potential for poor work because of a lack of experience. The problems that may occur are:
- Raised tiles
- Cracked tiles
- Loose tile
- Not having a finish you are happy with because of complicated cuts around corners
Return to Top
How To Choose Bathroom and Kitchen Tile
For many homeowners looking to install tile as a flooring solution, some of the top considerations commonly weighed first are the cost, look, and wear rating of the tile.
Tile PEI Ratings
A traffic rating system was standardized by the Porcelain Enamel Institute, called the PEI Wear Rating, which measures the abrasion resistance properties of a tile. The scale goes from 1 to 5, and the higher the number, the more use the tile can endure before any physical damage occurs that would change the appearance of the tile. [4]
- PEI 1 and PEI 2 only recommended for wall application, such as a kitchen backsplash or bathroom wall tiling.
- PEI 3, Moderate Traffic – These tiles can be used on all indoor wall applications, all interior countertop applications, and all residential interior floors. This tile should not be used in commercial applications.
- PEI 4, Moderate to Heavy Traffic – These tiles can be used on all indoor wall applications, all interior countertop applications, all residential interior floors, and all light commercial applications, such as restaurants and lobbies.
- PEI 5, Heavy Traffic – These tiles can be used on all indoor wall applications, all interior countertops applications, all residential interior floors and all heavy commercial applications, such as airports, shopping malls, supermarkets, etc.
Porcelain Tile Grades
Each box of tiles has an information label where you can find the PEI rating (indicated next to an icon of a drill bit drilling into tile) for that tile. In addition to the PEI rating, you will also find the following:
- Best quality (1) – Ideal for walls and floors
- Good quality (2) – Has slight imperfections – Ideal for floors and walls
- Low quality (3) – Being the thinnest tile, it is only suitable for walls and not for floors
Tile Water Absorption Rating
In addition to hardness, wear rating, and slip resistance, the water absorption rating measures how much moister is likely to absorb into your porcelain tiles over time. If the moisture penetration gets too high, your tiles will crack. Here are the four different tile moisture absorption ratings:
- Nonvitreous: High absorption (more than 7% of water absorbed). Not suitable for outdoor use or rooms with a lot of moisture, such as bathrooms.
- Semivitreous: Moderate absorption (3%–7% water absorbed). Not suitable for outdoor use or wet rooms, such as bathrooms.
- Vitreous: Low absorption (0.5%–3% water absorbed). Suitable for outdoor use and wet rooms, such as bathrooms.
- Impervious: Lowest absorption (less than 0.5% of water absorbed). Suitable for all interior and exterior uses.
Coefficient of Friction Floor Tile
The COF (Coefficient of Friction) Rating details the potential for slipping on the tile and is a measure of how much force is required to move something across a tile divided by the weight of the object. The range goes from 0 to 1, with a higher number indicating more friction, which makes it less slippery. Based on the ratings, they make the following suggestions:
- COF >.50 Suitable for residential installations
- COF >.60 Suitable for commercial installations, or any floor that is frequently wet
Additional Considerations
- Frost Proof – Icon of a snowflake – If this icon is on the information label, then the tile is suitable for outdoor use where freezing conditions are common.
- Tone – Icon of a grid of various shades of gray – The presence of this icon indicates that there are different tones of color in the box of tiles and they are not all identical, and as a result more organic.
Tile Sizes
Square tiles are the standard shape you will see. While selecting a design that does not use square tiles will typically give a more exciting finish, it will take longer per square foot, and as a result, it will cost more to install. The most commonly sold tile sizes are:
- A square shape of up to 36” by 36” and as small as 4” by 4”
- A rectangular shape from 3” to 24” tall and anywhere from 24” to 48” long
Return to Top
Frequently Asked Questions
How much does it cost to install ceramic tile per square foot?
Ceramic tile is the least expensive tile option with the tiles ranging from $1 to $3 per square foot, and the labor for installation costs around $5 per square foot.
How much do tilers charge per hour?
The national average for professional tile installers works out to about $35 per hour; however, most contractors charge per square foot. Tilers know how many square feet they can get installed in an hour, and since the square footage of the area in your home that needs the tile has definite measurements, it’s a better way for both parties to structure the costs.
How much does it cost to tile a small bathroom?
For a small bathroom of 40 square feet, your costs range between $300 for ceramic tile up to $600 for marble. For a medium bathroom of 75 square feet, the range is between $563 to $1,125. For a large bathroom measuring 160 per square foot the range is $1,200 to $2,400, and for a huge bathroom of 210 square feet, prices range from $1,575 to $3,150 on the high end.
Get free estimates on HomeGuide from trusted tile installers:
Get free estimates
References
[1] Craftsman National Home Improvement Estimator 2018
[2] Home Depot’s description of the label information
[3] Craftsman National Home Improvement Estimator 2018
[4] A description of each classification from the Floor and Décor website
Cost of Tiling Per Square Meter
Contents
- How Much Does A Tiler Cost?
- How Much Do Tiles Cost?
- How Does Tile Choice Affect Tiling Service Rates?
- How Do Tilers Price A Job?
- How Much Do Tilers Charge per Hour?
- What Do Tilers Charge per Square Metre?
- How Much Does It Cost to Install Tiles per Square Foot?
- Tiling prices from real customers
- What Are Tiling Labour Rates Across Australia?
- How Much Should I Pay for Tiling?
Wondering how much tilers charge in Australia?
The prices for professional tiling services vary between $30/$45 on average up to $100/$120 per square metre, whereas the hourly rates range from $45 to $100 per hour. The average cost for new tiling is $50/m2 based on quotes and jobs completed on ServiceSeeking.com.au.
Where do these prices come from?
All prices stated in this article are based on FY 2018 pricing data compiled by ServiceSeeking.com.au. The figures resulted from a comprehensive analysis of quotes submitted by Tilers on the site from July 2016 to July 2017.
Here’s a brief overview of tiling services cost in Australia calculated per hour, per square metre, and per square foot including indoor and outdoor tiling work – wall tiling, floor tiling, even swimming pool tiling cost per m2.
How much does tiling cost in Australia? | |||
---|---|---|---|
Tiling Job Type | Lowest | Highest | Average |
Indoor tiling cost per hour | $45 | $100 | $60 |
Outdoor tiling cost per hour | $40 | $60 | $45 |
Indoor tiling cost per sqm | $30 | $120 | $50 |
Outdoor tiling cost per sqm | $40 | $60 | $45 |
Indoor tiling cost per square foot | $2-$3 | $10-$12 | $5-$7 |
Outdoor tiling cost per square foot | $4 | $6 | $4. 5 |
Wall tiling cost per m2 | $41.50 | $60 | $50 |
Floor tiling cost per m2 | $35 | $50 | $40 |
Pool tiling cost per m2 | $44 | $90 | $87.50 |
However, there is a wide range of tiling costs depending on:
- the tiling material used,
- the size and difficulty of the job,
- which state the job is completed in and
- how much demand there is for renovation work at any particular time, to name just a few major factors (more details further in the article).
So, let’s see how much hiring a tiler costs and what else influences the prices.
Image source: Style at Home
How Much Does A Tiler Cost?
When speaking of tiling labour costs, a qualified and experienced tiler will charge on average $60 per hour to lay new tiles, or around $35 per square metre depending on the complexity of the job.
Large tiles often have a higher labour rate cost, because even though a smaller number of overall tiles need to be laid, there is less tolerance for error during the laying process – therefore requiring greater skill and care – compared to laying a larger number of small tiles.
Image source: interiorcharm.com
To ensure that you’re getting an accurate price, it’s important to clarify what exactly is included in your quotes.
Now that you know how much is labour for tiling, let’s dig a bit deeper so that you’re well prepared for this serious project on time.
The most common areas for new tiling are:
- bathroom,
- kitchen,
- laundry,
- outdoor areas such as balcony, swimming pool and others.
If you’re getting ready for tiling any of these areas, you may also require waterproofing work as well. So, it’s wise to check the cost of waterproofing in advance.
Follow the links below to find out more detailed information about:
- the prices and factors that can affect the total cost of bathroom tiling,
- what is the average cost of kitchen tiling and what influences it,
- the cost of a professional outdoor tiling service and what affects the tiling rates,
- total bathroom renovation costs,
- total kitchen renovation costs,
- kitchen renovation ideas for inspiration,
- bathroom renovation ideas for inspiration,
- swimming pool tiling ideas for inspiration.
Now you’ve got a solid starting point for your tiling project, don’t you?
Great, but there’s much more to take into account before you get down to work. So, keep reading.
Photo courtesy of Pixabay Images by DarthZuzanka
How Much Do Tiles Cost?
The first question that pops up when you think of tiling material is ‘How much do tiles cost?’, isn’t it?
Generally, basic ceramic tiles can start from as little as $30 per square metre and range over $110 for high quality natural stone tiles or custom designed tiles.
How much do tiles cost? | |||
---|---|---|---|
Tiling Job Type | Lowest | Highest | Average |
Ceramic wall tiles per m2 | $20 | $160 | $40-$80 |
Porcelain wall tiles per m2 | $50 | $100 | $63-$85 |
Natural stone wall tiles per m2 | $25 | $135 | $69-$78 |
Ceramic floor tiles per m2 | $36 | $95 | $50 |
High quality porcelain floor tiles per m2 | $49 | $130/$150 | $65-$86 |
Natural stone floor tiles per m2 | $50 | $150 | $78-$86 |
Mosaic tiles per sheet | $26 | $91 | $33-$49 |
Photo courtesy of Pixabay Images by GregoryButler
Wondering why some tiles cost more than others?
A tile’s price tag is affected by:
- its style, design and appearance,
- the type of material (ceramic, porcelain, glass, granite, marble, or any other natural stone),
- the quality of material (its density, porosity, absorption and so on)
- the quality level of glaze,
- the print quality,
- its durability,
- the cost of production (technology, firing temperature etc. )
- the country of origin,
- its availability,
- repetitiveness of the pattern and other similar factors.
Now, let’s see what all this has to do with tiling service rates.
How Does Tile Choice Affect Tiling Service Rates?
Apart from tiling labour costs, you must take into consideration material costs as well.
Budget tiling projects often use common white ceramic tiles, which are usually the cheapest to source, followed by high quality porcelain tiles. High quality natural stone tiles are often the most expensive, and can range in cost from $100 – $150 per square metre.
As a result, most people usually choose either ceramic or porcelain tiles, but are often in doubt about how they actually differ.
Screenshot source: The Spruce
Not all residential tilers will have experience laying more custom types of stone, which is why labour rates can also increase vs using more common tiling materials.
If you’re on a budget, consider the use of small finishes and strips of high quality stone to provide featured accents to your tiling renovation, instead of the same tiles for an entire surface area.
Image from shamirenovations.com.au
How Do Tilers Price A Job?
Now let’s figure out how exactly tilers price a job, that is to say, what other factors also matter in totaling tiling costs.
In general, laying straight tiles costs less than working with patterned or asymmetrical varieties. Expect prices to further increase should you opt for feature or contrasting tiles.
Similarly, laying tiles is not the only task tilers do. Often, they need to perform other different prep tasks which affect their quotes. Those task may include:
- removing old tiles
- preparing surfaces
- cutting tiles
- applying grout
- tile resurfacing
- applying waterproofing if needed etc.
To sum up, tilers consider these important factors in drawing a quote:
- type of tiles to be used
- details of the area to be covered
- level of difficulty in laying tiles
- site preparation and extras
- size of tiles (large tiles are generally more expensive to lay than smaller ones)
Photo from: Tile Doctor WA
How Much Do Tilers Charge per Hour?
Tilers charge $45 to $60 per hour. However, the tiling hourly rates vary between $40 and $100, depending on whether the tiling is required indoors or outdoors.
Photo courtesy of Pixabay Images by Midascode
What Do Tilers Charge per Square Metre?
Although many tilers calculate their charges based on their hourly rate, you are more likely to get a per square metre quote, or even per job.
Tiling costs per square metre range from $30 to $120. Average prices for laying tiles are between $45 and $50 per square metre.
Photo courtesy of Pixabay Images by Midascode
How Much Does It Cost to Install Tiles per Square Foot?
The total cost of tiling primarily depends on your choice of tiles, as you’ve already realised. Let’s say that average prices are $4.5-$8.5 per square foot, when we know that costs of tiles generally range from $4 to $16 per square foot depending on the type and quality of material.
For instance, natural stone tiles cost around $2.5-$15 per square foot, whereas designer floor tiles even reach over $25 per square foot.
The next factor to take into account is labour, which typically costs $4 to $5 per square foot.
Apart from tile prices and labour costs, don’t forget that many other factors can influence the total price of tiling.
For example, tilers take into account the difficulty level of the job, whether they need to remove the old tiles (which costs approximately $2 per square foot), as well as whether there’s any other prep work needed, such as levelling the floor and similar.
In total, according to some expert tilers, you may expect to pay $7.50-$10 per square foot for the installation of midrange tiles.
Image from mybathroomandkitchen.com.au
Hear from the experts – experienced ServiceSeeking.com.au tilers provide their own cost estimates
Ben of Shami Renovations
Bathroom tiling
Price is for an average-sized bathroom. Price can still go up if the layout and structure of the bathroom will be changed as well.
Total Cost: $1,500 – $2,500
Tommy of Mitie Tiling
Bathroom tiling
Price can still increase if the bathroom is very large and if the customer wants chrome trims, mitred edges, and other extras.
Total Cost: $3,500 – $4,500
Kitchen tiling
Price is for labour only, and it does not include materials.
Total Cost: $550
Mohamed of Pro Tiling
Outdoor tiling
Price is an approximate for a 10m2 outdoor area and usually depends on the materials to be used. It may include leveling.
Total Cost: $450 – $550
Photo courtesy of Flickr Image by Lizzie Benton
Tiling prices from real customers
Phung from SA: Tile Splashback Installation
Job details: Installing 100mm x 200mm tiles on a 3sqm kitchen wall; labour only
Other details: Two light switches and two power points are located in the area; tiles must be cut
TOTAL COST: $350
Edward from NSW: Laundry Area Tiling
Job details: Tiling of laundry area that’s approximately 25sqm
TOTAL COST: $1,960
Mark from NSW: Indoor Floor Tiling
Job details: Tiling of an indoor area that’s around 50sqm; labour only
TOTAL COST: $2,900
Image from mybathroomandkitchen. com.au
What Are Tiling Labour Rates Across Australia?
South Australian tilers charge the most affordable price at around $37.79/m2. Tiling services in Queensland, on the other hand, are considerably pricier at $45.08/m2. However, this is still slightly lower compared to the $45.40/m2 rate in Western Australia.
At $47.15/m2, the average rate for tiling work in Victoria tops those of tilers in Queensland and Western Australia. New South Wales has the highest average cost overall at $60.01/m2.
Apart from considering the price of tiling services, you should also ensure that you’re hiring a qualified tradie for the job.
ServiceSeeking.com.au has a list of the best tilers in Australia, so you might want to check it out to find the right business to give your bathroom, kitchen, laundry or your any other indoor or outdoor house area a face-lift.
Screenshot from: TFO Gallery
And for all those who still may be wondering “How much will tiling cost me?”, here comes the straightforward answer.
How Much Should I Pay for Tiling?
Use our tiling cost estimator calculator to work out the approximate cost of YOUR next tiling project.
A more precise cost estimate for your tiling project is a matter of minutes and a few clicks below. Don’t hesitate to get the best possible deal today! Why would you overpay for tiling?
Disclaimer: Our cost estimates are based on quotes for tiling services and are useful as a guide only.
Get a Tiling Quote in 2 Minutes
Where can I find the nearest local tiler?
More Price Guides
Browse Photos
Looking for reliable, professional tilers in your area? Check out ServiceSeeking.com.au’s highest-rated tilers in these major cities:
Sydney | Melbourne | Brisbane | Perth | Adelaide | Hobart | Canberra | Darwin
2022 How much does a tiler cost? | Cost guide 2022
- What do tilers do?
- Does my tiler need to be licensed?
- Hiring a tiler
- How much does a tiler cost?
- How much do tiles cost?
- Getting quotes from a tiler
- Get tile design ideas and inspiration
If you’ve gone to the trouble to renovate your kitchen or bathroom and want to see results you can be proud of, it’s always better to hire a professional tiler than trusting your DIY skills! If you’re on a tight budget, though, you may be tempted to “give it a go” and try tiling yourself. Is it worth taking the chance? Are tilers as expensive as you think they are?
Tilers charge and quote based on a per square metre rate, with the size and type of tiles determining the price. Expect to pay anywhere from $35 per square metre to $150 per square metre, with smaller labour intensive tiles like mosaics and subway tiles at the upper end of the scale .
Ceramic floor tiles in an outdoor setting © Maymar Constructions
Tilers can perform a range of tasks including:
- Preparation of surfaces
- Cutting and laying of tiles (wall and floor)
- Applying grout
- Tile resurfacing
- Tile removal
- Applying waterproofing where necessary
There is no uniform nationwide requirement for tilers to be licensed, so you need to check what applies where you live. In NSW for example, wall and floor tilers (and waterproofers) are all required to be licensed. In other states you could ask your tiler for their qualification or to see examples of their work.
Laying floor tiles.
Read: 6 tips for choosing the best kitchen tiles for you
When it comes time to hiring a tiler, take time to make sure they are right for your job. Some questions to ask then include:
- Are you licensed or qualified?
- Are you insured to work in my home?
- How long will my job take?
- Can you provide a written quote?
- Do you have references I can follow up?
- Can I see examples of your work?
© Walkers
#hiptip tilers will quote based on a number of factors including the size and difficulty of your job
So how much will a tiler cost you?
It depends on a number of factors, including how difficult the job is. Expect to pay more for them to lay patterned, asymmetrical, contrasting or feature tiles and the cost to remove a tile floor. If your job is very intricate with lots of cut outs and details then you are also going to pay more.
Tilers charge by the hour or by the job, but in either case, they calculate their charges based on their hourly rate. On average, though, tilers charge anywhere from $45 to $150 per hour.
You are more likely to be quoted a per square metre rate, ranging from $35 per square metre to $120 per square metre. $60 per square metre is the average for laying bathroom tiles. This figure does not include the price of the tiles – you need to budget for that separately.
#hiptip: Get your tiler to provide a written quote for your entire job, rather than getting an approximate based on their hourly rate
There’s more to choosing a tiler than just asking their hourly rate, though. Aside from having greater skill, a more experienced tiler will be able to work far more quickly and efficiently than an inexperienced tiler. Therefore, one who charges twice as much as another may end up being cheaper, especially if the job is a large one. For this reason, it’s better to insist on a written quote for the job than settle for an hourly rate quote and a “ballpark” estimate that comes with no contractual obligation.
Using samples can help you choose the right tile for your project
The cost of your tiles is a major factor to consider for any renovation project. Tiles come at a range of price points. For wall tiles, expect to pay in the region of:
- $20 to $28 per square meter for standard white ceramic wall tiles (600mm x 300mm)
- $68 per square metre for steel grey polished porcelain wall tiles (150mm x 600mm)
- $86 per square metre for handmade Spanish white gloss ceramic subway tiles (150mm x 75mm)
- $159 per square metre for artisan manufactured ceramic wall tiles (200mm x 200mm)
For floor tiles, expect to pay:
- $35 to $50 per square meter for ceramic or porcelain tiles
- $50 to $100 per square meter for high quality porcelain
- $80 to $130 per square meter for high quality natural stone tiles
For mosaic tiles, priced per sheet, expect to pay:
- $33 for one pebble effect mosaic sheet (300mm x 300mm)
- $47 for one interlocking mosaic sheet (300mm x 290mm)
Don’t forget to factor in the cost of laying them, which is where a tiler comes in handy.
Read: Trends in grout coloring
It’s always best to get 3 quotes for tilers, but in order to make a fair comparison, there are some important things to look for, starting with an itemised, written quote. Some questions to ask yourself when comparing quotes include:
- Does the quote include tiles?
- Does the quote include removal of old tiles and surface preparation?
- Is sealing, waterproofing (if needed) and polishing the tiles included in the quote?
Often, none of these are included in a tiler’s quote, but they can add significantly to the final cost. Before deciding on a tiler, ask them for additional quotes for any extra services that you need. You might also want to choose your tiles first and get quotes for supplying them, too.
Tilers can buy tiles at a substantial discount and some tilers pass the savings on to their customers. If you’re looking for the cheapest tiles, this may not make a big difference, but if you want stylish, modern tiles and feature tiles, the savings can be substantial.
#hiptip: Besides asking for references, also ask to see a tilers work before you hire them
Subway tiles have become popular as a kitchen splashback © Dream Doors
If you’re choosing tiles, a great place to start is on our Tile Design Ideas photo gallery. While you’re there, why not put together an inspiration board and add a link to it on your query form? That way, the tilers we forward your request for quotes to will have a better idea of what you’re looking for and be able to give you more accurate quotes.
The best way of finding out the cost of your tiling job is to get quotes from local tilers. This will give you a sense of what market rates currently are.
* All the costs and prices quoted were sourced at the time this article was written. They are indicative, may vary locally, are subject to market forces and should only be used as a guide.
How Much Does Floor Tiling Cost? [2022]
The cost of floor tiling ranges from $130 to $205 per square metre including labour and materials. Prices vary depending on the size and type of floor tiles used, the number of areas to tile and your location.
Floor tiles come in a variety of styles, thicknesses and resistant qualities. Ceramic, mosaic and porcelain tiles are few examples of non-resilient or hard surface types. The material type will affect how much does tile costs. Choosing among the available floor tiling materials is often based on property needs and allocated budget.
The type of tiles you will use for outdoor areas should also be considered as these tiling sheets are more exposed to water and heat.
Tile Flooring Labour Costs
Most tilers charge an approximate amount of $37 to $65 per square metre. The price range will depend on the size and complexity of the job. Below is the average price of professional tilers on a per-square-metre basis.
State | Average Cost per m2 |
New South Wales | $60 to $65 |
Victoria | $47 to $50 |
Western Australia | $45 to $47 |
Queensland | $45 to $47 |
South Australia | $37 to $40 |
The increase in cost may mean a high demand for professional floor tilers in your area. By posting a job on HIREtrades, you will receive up to three quotes from local contractors.
DIY work might reduce the expenses for preparation and installation procedures but for high-quality results, having a qualified tiler work benefits in the long run. Ask for written quotations to clarify costs and the scope of work.
Tile Flooring Cost By Type
Multiple factors affect the total cost of a tile flooring project, one of which is the type of tile to be used. Naturally, tiles that have a more premium look and additional features will cost a little more than others. Read on to learn more about the different types of tiling and their costs:
Porcelain
Porcelain is one of the most popular types of tile. Many Aussie homeowners prefer porcelain due to its durability, appearance, and resistance to stain and moisture. Prices for porcelain tiles range from $50 to $100 per square metre.
Ceramic
Ceramic is also a common tile choice for Aussies. It is resistant to scratches, dents and dents – but they are more budget-friendly than porcelain tiles – with an average price of $30 per square metre for indoor tiles.
Travertine Tiles
Travertine is a type of natural limestone with unique swirls and movement in its appearance. Expect to pay up to $120 per square metre for travertine tiles.
Stone
Natural stone tiles such as granite, slate and marble tiles are another popular choice of tile in Aussie households. The costs for stone tiles range from $100 to $300 per square metre.
Glass
Glass tiles are most suitable for indoor use – installed as kitchen backsplash, kitchen countertop or in the shower. For glass tiles, prepare a budget of about $50 to $100 per square metre.
Cement-Look Tiles
Cement-look or concrete-look tiles have a modern industrial aesthetic that gives your home a clean and timeless look. Costs for cement-look tiles range from $50 to $75 per square metre.
Cost To Tile a Bathroom Floor
Assuming you’ll be using ceramic tiles in tiling your bathroom floor, the average total cost for tiling a small bathroom floor of 3 square metres is around $400 to $800, which already includes labour cost.
Total cost for tiling a bigger bathroom of 15 square metres (including labour) would be $1,600.
Cost To Tile a Kitchen Floor
Tiling a small kitchen floor measuring 15 square metres will have a total cost ranging from $1,400 to $2,800. Tiling a bigger kitchen measuring 17 square metres will cost about $2,000 to $3,900.
Cost To Replace a Tile Floor
Replacing an existing tile floor will incur additional labour costs for removing the old tiles. Expect to pay an additional $200 to $600 on top of the total installation cost.
What Determines the Cost of Floor Tiling Job?
Knowing what influences the cost of tiling services helps you in preparing your budget for the overall work. Whether it is a renovation or extension project, it pays to consider a few factors that determine the cost.
1. Site preparation
Preparation tasks such as cleaning and surfacing the area determine how much you will be charged. Likewise, removing old tiles adds to your total expenses.
The cost to remove tile floors can range from $20 to $50 per square metre depending on the type of tile, site condition and many other factors. In some cases, using a concrete grinding machine is required before the actual tile removal.
2. Materials
The type of materials you are planning to buy and install affects the overall cost.
For instance, if you prefer a set of 61mm x 61mm glazed mosaic tiles to be used for your bathroom renovation project, the price per square metre could be around $113 to $139 for materials, including bedding and pointing.
Identify what floor tiles to choose and shop around to compare prices.
3. Level of difficulty
The degree of difficulty in laying tiles increases the job’s complexity. This will incur higher costs for labour.
Do you need a floor expert across Australia?
Note: It is important to have the area carefully assessed before commencing the work. In this way, your prospective tiler may provide more accurate cost estimates.
How Much Should You Pay for Tiles?
The cost to install tiles can vary from $95 to $140 per square metre in main areas. The price may increase depending on where you live and what type of floor tiling is used.
Type of Tiles | Size | Tiles Prime Cost** | Installation incl. bedding and pointing (m2) |
Mosaic (Glazed) | 61 x 61mm | $40 | $113 – $129 |
100 x 100mm | $40 | $110. 50 – $135 | |
Mosaic (Unglazed) | 50 x 50mm | $40 | $113 – $139 |
Mosaic (Homogeneous) | 50 x 50mm | $40 | $113 – $139 |
Ceramic | 200 x 200mm | $40 | $104.50 – $127 |
300 x 300mm | $40 | $103 – $125 | |
330 x 330mm | $35 | $97.50 – $119 | |
450 x 450mm | $40 | $102 – $124 | |
600 x 600mm | $55 | $118 – $139.50 | |
Quarry (Light duty) | 250 x 250mm | $33 | $96.80 – $119.50 |
Quarry (Heavy duty) | 300 x 300mm | $38 | $101 – $123 |
Quarry (Unglazed) | 200 x 200mm | $50 | $115.50 – $138 |
Terracotta (Natural) | 300 x 300mm | $42 | $105 – $127 |
Terracotta (Tactile) | 300 x 300mm | $48 | $113. 50 – $136 |
Vitreous
(Unglazed porcelain) |
200 x 200mm | $50 | $115.50 – $138 |
300 x 300mm | $50 | $114 – $136 |
*Pricing details are based on Australian Construction Handbook 2018 Edition.
**Allowance for tile selection. This may vary due to individual or project requirements.
How much maintenance is required for floor tiles?
Hard-surfaced floors are easier and cheaper to maintain. Regular vacuuming and sweeping can help to avoid early deterioration in appearance and durability.
Tile resurfacing can also give your floor tiles a new look. Hiring a professional tiler will help to give you accurate pricing to organise your budget.
Grout cleaning is another aspect to consider. This helps to bring back the original appearance of your floor tiles and keep them in good condition.
Regardless of what type of tiles you may install, make sure to have it properly maintained by a trusted tiler in your area. HIREtrades can help you find local contractors for your next floor tiling job.
Get Quotes From Floor Tiling Experts
Tiling your floors require the expertise of a floor tiling expert. HIREtrades can make the scouting and hiring process easier for you by allowing you to post the job on our app or at hiretrades.com.au.
Once you register and post the details of your tiling project at HIREtrades, our system will alert the professional tiling contractors in your area to give them a chance to submit a quote for your project. You’ll receive up to 3 FREE quotes to help you get started and help you save on costs.
Frequently Asked Questions
How to reduce the cost of tiling?
Choose less expensive type of tile, such as ceramic tiling Reduce the size by concentrating the tiling in a smaller floor or wall area Eliminate costs by foregoing unnecessary details such as a tiled kitchen island or a bathroom vanity area.
What’s the difference between floor tiles vs laminate flooring vs timber flooring?
Floor tiles and laminate flooring cost almost the same, however, floor tiles are proven to be more durable than laminate because of its moisture-resistant quality. Water that seeps into laminate flooring can cause discoloration, warping, and permanent damage. However, the disadvantage of tile flooring is that it is more susceptible to chipping or breaking under heavy pressure. Timber or hardwood flooring is another popular choice due to its warm and classic aesthetic – although like laminate flooring, timber is not resistant to water or moisture. Water damage in timber floors can result in faster wear and tear compared to laminate flooring or floor tiles.
Receive up to 3 free quotes
How to Estimate the Cost of Tiling a 3 Bedrooms Flat
Using tiles to cover the surfaces of floors, walls, countertops, etc can be a very attractive option for finishes in a building. Tiles can provide hard, durable, and aesthetically pleasing surfaces in a building provided that the tiling job is properly done. There are some basic principles that must be followed in order to achieve quality, beautiful and durable tiling.
For a homeowner and/or contractor, cost is a major factor that influences the decision and quality of tiling to be done. The basic factor that can influence the final cost of tiling a house are;
- Cost of the tiles
- Cost of screeding
- Cost of adhesives
- Cost of grouting cement
- Cost of tiling accessories such as edge trimmers
- Cost of labour
- Size of area to be tiled
In this article, we are going to show how to estimate the cost of tiling a house in Nigeria using a three bedrooms apartment as an example. The floor plan of the three bedrooms apartment is shown in Figure 1. It is desirous to tile all the floors of the building according to the following specifications;
(1) All bedrooms, kitchen, and rear balcony/sit-out: 40cm × 40cm made in Nigeria ceramic tiles
(2) The sitting room, dining, and front balcony/sit-out: (30cm × 60cm) imported Virony glazed tiles;
(3) All the toilets and bathrooms: (30cm × 30cm) made in Nigeria ceramic tiles.
We are required to estimate the total cost of tiling the entire floor of the building, considering materials and labour.
Figure 1: Floor plan of a three bedrooms apartment
It is very important for you to make an adequate market survey, in order to know the exact prices of materials in your area. This is the only chance you have of making a reasonably accurate estimate. The prices stated below are a bit representative, but merely informative. Note that tiles with designs may be more expensive than plain tiles or tiles with a single colour.
(40cm × 40cm) Ceramics Tiles = ₦3,360 per carton (12 pieces per carton – 1.92 square metre)
(30cm × 60cm) Porcelain Glazed Tiles = ₦5,760 per carton (8 pieces per carton – 1.44 square metre)
(30cm × 30cm) Ceramic Tiles = ₦2,700 per carton (17 pieces per carton – 1.53 square metre)
1 tonne of sand = ₦4,000
1 bag of cement = ₦4,000
5 kg of white cement = ₦2,500
Water seal = ₦700 per kg
Tile gum (20kg) = ₦1,450
BILL NO 1: TILES AND TILING ACCESSORIES
(a) Tiling of the bedrooms, kitchen, backyard sit-out, and store with (40cm × 40cm) Time Ceramics Tiles
We have to calculate the floor areas where we are going to apply the (40cm × 40cm) tiles;
Bedroom 1 = (3. 6m × 3.45m) = 12.42 m2
Bedroom 2 = (3.6m × 3.6m) = 12.96 m2
Bedroom 3 = (3.15m × 3.17m) = 9.9855 m2
Kitchen = [(3.35m × 2.35m) + (1.37m × 1.075m)] = 9.34525 m2
Store = (2.025m × 1.775m) = 3.59 m2
Kitchen Sit-out = (1.37m × 2.075m) = 2.84275 m2
Total Area = 51.148 m2
Area of a piece of tile = (0.4m × 0.4m) = 0.16 m2
The number of pieces of tiles required to complete the floor areas = 51.148/0.16 = 319.675 pcs
Therefore, the number of cartons required = 319.675/12 = 26.639 cartons.
We will therefore provide 30 cartons of (40cm × 40cm) ceramic tiles. Extra tiles will account for damages, and for skirting of the foot of the walls.
Therefore the cost of the (40cm x 40cm) tiles = 30 × ₦3,360 = ₦100,800
(b) Tiling of the sitting room, dining, and entrance porch with (60cm x 30cm) tiles
The floor areas where we are going to apply the (60cm × 30cm) tiles;
Sitting room = (5. 65m × 4.625m) = 26.13125 m2
Dining = (2.35m × 3.35m) = 7.8725 m2
Entrance Porch = (3.78m × 1.475m) = 5.5755 m2
Total Area = 39.579 m2
Area of a piece of tile = (0.6m × 0.3m) = 0.18 m2
The number of pieces of tiles required to complete the floor areas = 39.579/0.18 = 219.883 pcs;
Therefore, the number of cartons required = 219.883/8 = 27.485 cartons
We will therefore also provide 30 cartons of (60cm × 30cm) ceramic tiles.
Therefore the cost of the (60cm x 30cm) tiles = 30 × ₦5,760 = ₦172,800
(c) Tiling of the bathroom and toilet floors with (30cm x 30cm) tiles
On calculating the floor areas where we going to apply the (30cm × 30cm) tiles;
Bathroom and Toilet 1 and 2 = 2(2.0m × 1.1m) = 4.4 m2
Bathroom and toilet 3 = (2.0m × 0.985m) = 1.97 m2
Visitor’s toilet = (2.0m × 0.875m) = 1.75 m2
Total Area = 8. 12 m2
Area of a piece of tile = (0.3m × 0.3m) = 0.09 m2
The number of pieces of tiles required to complete the floor areas = 8.12/0.09 = 90.222 pcs
Therefore, the number of cartons required = 90.222/17 = 5.307 cartons
We will therefore provide 7 cartons of (30cm × 30cm) ceramic tiles
Therefore the cost of the (30cm x 30cm) tiles = 7 × ₦2,700 = ₦18,900
(d) Loading, transportation, and offloading at the site (say) = ₦20,000
Therefore, sub-total 1 = ₦100,800 + ₦172,800 + ₦18,900 + ₦20,000 = ₦312,500
BILL NO 2: CEMENT AND SAND
We are going to make 25mm thick screeding to receive the tiles.
From above, you can verify that the total floor area of the building = 51.148 m2 + 39.579 m2 + 8.12 m2 = 98.847 m2
Volume of mortar required = 98.847 × 0. 025 = 2.471 m3
Using a mix ratio of 1:5
Cement required = 6 bags/m3
Sand required = 1800 kg/m3
Cement required = 14.826 bags (provide 15 bags)
Sand required = 4.447 tonnes (provide 5 tonnes)
Alternative calculation by site experience
From experience, 2 bags of cement is sufficient to complete the entire tiling process of (3.6m × 3.6m) room
Therefore;
2 bags of cement = 12.96 m2
x bags of cement = 98.847 m2
On solving;
x = 15.254 bags of cement; say 16 bags of cement
From experience, about 20 – 22 head pans of sharp sand is sufficient to complete the entire screeding process of (3.6m × 3.6m) room;
22 head pans = 22 × 0.0175 m3 = 0.385 m3
Therefore;
0.385 m3 of sand = 12.96 m2
x m3 of sand = 98.847 m2
On solving;
x = 2. 936 m3 sand = 4.844 tonnes of sand
Therefore, provide;
5 tonnes of sharp sand = ₦20,000
The cost of cement = 16 × ₦4,000 = ₦64,600
Water seal = 16 packs = 16 × ₦700 = ₦11,200
Tile gum = 17 bags × ₦1450 = ₦24,650
Other tiling accessories (allow) = ₦20,000
Transportation (say) = ₦5,000
Sub total 2 = ₦145,450
BILL NO 3: LABOUR
Cost of tiling 1m2 of floor = ₦500
Therefore;
1 m2 = ₦350
98.847 m2 = x
On solving;
x = ₦49,423 (rounding up to the nearest 100)
Therefore, cost of labour = ₦50,000
GRAND TOTAL = ₦ 312,500 + ₦145,450 + ₦50,000 = ₦507,950
Therefore the cost of tiling the floor of the building = ₦507,950 + VAT + Engineer’s/Architect’s Profits
Thank you for reading
Like our facebook page;
www. facebook.com/structville
How Much Does Tiling Cost In Sydney? (2022 Price Guide)
Overall, the average range for tiling falls between $30 to $120 per m2 or $45 to $100 per hour. Prices vary based on your choice of tile (e.g. porcelain is more affordable than marble), the size of your area, and the area being tiled. If you’ve got a bathroom, kitchen, laundry or swimming pool to upgrade, we’ll show you how much it will cost.
Home renovation is often a double-edged sword.
On one hand, the right improvements — like getting fresh new tile on your kitchen wall, bathroom or around the pool — can make a huge positive impact on your space, leading to higher retail value, a more modern aesthetic, and other key benefits.
That said, renovation costs can easily spiral out of control if you’re not working to a budget, and it can be hard to get a straight answer about the costs and how much you should reasonably expect to pay.
So let’s cut through the jargon and talk about the cost of tiling in your Sydney home or business. Read on for everything you need to know about tiling costs in Sydney.
Is it worth getting new tiling?
First thing’s first: is getting new tiling the right choice for you?
You don’t want to spend on a service that’s not going to improve your home or lifestyle. Thankfully, when looking at the big picture, upgrading your tiling is one of the easiest and most cost-effective ways to upgrade your bathroom, kitchen, swimming pool, or outdoor space.
This makes tiling an ideal choice for Sydneysiders wanting to spruce up their home without breaking the bank. If you’re on the fence over new tiles, here are our favourite reasons to take the plunge:
✔ Tiling is easy to clean:
This is particularly true when compared to timber or carpeted floors. This can be a huge plus if you deal with a lot of foot traffic or if you want daily cleaning and stains to be at the bottom of your to-do list.
✔ Tiling is easy to repair:
In the same vein, if you chip or damage a tile, it is fairly easy to replace and repair (and you don’t have to fix the whole space). This makes it ideal for large, busy families or rooms that receive heavy foot traffic (e.g. your kitchen or bathroom).
✔ Tiling keeps your home cool:
Unlike carpet, which tends to retain heat, tile actually cools the surrounding space. This can be great in Sydney’s hotter months or if you’re trying to cut down on heating bills.
✔ There are lots of tiling options:
If you’re looking for variety, you really can’t go wrong with tiling. With a huge range of materials available, you’re bound to find the right tiling for your unique needs and space (and if you can’t decide, we’re happy to help).
In short, tiling is a high reward, low risk upgrade — and it’s likely to be well worth your investment today and in the future.
Average tiling cost (by area)
How much should you expect to pay in total for each area of your house?
Well, there are a couple of key factors to keep in mind depending on the area that you want to tile. These variables include:
- Type of tile you use (each tile material brings its own cost)
- Style or design to make your area pop (while staying durable over time)
Remember, you can always work with an expert if you’re unclear about any of these details. Once you know which tile you’ll be using and what design features you want to include, here are some averages by area
Average floor tile cost
Sydney costs for tiling floors typically falls into the following price ranges:
Tile | Average Price |
---|---|
Vinyl floor tiles | $40 to $100 per m2 |
Ceramic or porcelain floor tiles | $50 to $150 per m2 |
Natural stone floor tiles | $90 to $125 per m2 |
Looking to tile your bathroom? Click here for the ultimate guide to bathroom tiling [2021 PRICES REVEALED]
Average swimming pool tile cost
The average cost of pool tiling in Sydney is roughly $90 per m2.
That said, if you have a small pool with straightforward installation, you can expect to pay closer to $60 per m2, and if you have a large or complex pool you can expect to pay approximately $90 per m2.
These rates will also depend on the type of tile that you choose for your pool. To help you accurately forecast your costs, here is a quick breakdown of average costs for the most popular swimming pool tiling options:
Type of Pool Tile | Average Reported Costs Per Square Meter |
---|---|
Ceramic | $15 to $90 per m2 |
Glass | $70 per m2 |
Natural stone | $70 per m2 |
Mosaic | $40 to $80 per m2 |
Porcelain | $15 per m2 |
Average outdoor tile cost
On average, outdoor tiling in Sydney will set you back an average of $45 per m2. The only additional cost to consider here is any drainage planning that you might need for your space.
Looking to learn more about outdoor tiling? Explore our range of outdoor tiling services here
What factors determine tiling costs?
Now that you know how each location influences the cost of tiles, let’s break down a few more variables to consider.
Tile Material
One of the primary influences of price is the type of tile you use. For example, a heavy natural stone like granite will cost more than porcelain which is easier to manufacture (compared to sourcing natural stone from the ground), and easier to work with.
Some of the most popular tiling options in homes from Bondi to the lower north shore:
- Ceramic
- Sandstone
- Granite
- Travertine
- Porcelain
- Basalt
- Rock cladding
Check out our simple table below for an overview of each tile’s average cost (keep in mind, these prices are for the tile materials only, and do not include installation costs).
Tiling Job | Average Cost |
---|---|
Ceramic wall | $40 to $80 per m2 |
Mosaic tiles per sheet | $30 to $50 per m2 |
Porcelain wall | $60 to $90 per m2 |
Porcelain floor | $60 to $90 per m2 |
Natural stone floor | $80 to $90 per m2 |
Natural stone wall | $80 to $90 per m2 |
Ceramic floor | $50 to $60 per m2 |
That said, keep in mind that price isn’t just about the look and the cost. You also need to consider the tile’s strength, its quality, and where it is best suited. Certain types of tile, for example, are not appropriate for a swimming pool or the inside of a shower as they lack grip strength, but they will work for countertops or backsplashes.
The key here is to pick tiling that will not only look good but last for a long period of time.
Installation complexity
If your install involves a complicated design, very small tiles, or a lot of prep work, expect to see these factors play into your overall cost. If you have old tile, uneven flooring, or other barriers, then, the cost will be higher.
Area size
Most professional tilers will charge you based on the square metre of the area they’re working on (as well as the complexity of the job and time that will be spent).
To stay on top of this cost, then, it’s important that you have a clear idea of the square footage that you’re working with. To calculate area cost, measure the length of your area and multiply it by the width. For example, a 5 metre x 8 metre space would be 40 m2.
Understanding this number, as well as the base cost of the material you choose and labour costs, will give you a good idea of your overall costs.
Labour
Labour can cost anywhere from $30 to $120 per m2, though this also depends on the area that you’re tiling.
Floors, for example, often cost around $40 per m2 while backsplashes and countertops generally cost anywhere from $25 to $35 per m2.
Alternatively, some Sydney tilers charge by the hour. If this is the case, expect to see a range from $30 to $120 per m2 depending on the project and your professional’s level of skill. Consult the table below for a complete breakdown of installation costs:
Tiling Job Type | Average Cost |
---|---|
Indoor tiling | $60/hour |
Outdoor tiling | $45/hour |
Indoor tiling | $50 per m2 |
Outdoor tiling | $45 per m2 |
Wall tiling | $50 per m2 |
Floor tiling | $40 per m2 |
Pool tiling | $85 per m2 |
Can you save money with DIY tile installation?
Anyone can lay tiles…in theory.
However, not everyone can lay tile well. If you get it wrong, you could wind up spending more money trying to fix your mistakes. You should only consider a DIY tile installation if:
- You have experience working with plumbing and you understand the blueprints of your home
- You have experience working with adhesives and laying tile
- You know how to measure and cut tile
- You know how to prepare your base floor or wall for the tile
- You have the skill to create the layout or planner that you’re looking for.
If you can’t tick all of these boxes, you should consider working with a professional. At NHK Tiling we offer a 100% Quality Guarantee and 100% Customer Satisfaction (alongside $20 million in public liability insurance) to ensure your home or business is always in safe hands.
RECAP: How much should you expect to pay for tiling in Sydney?
Overall, the typical range for tiling costs is $30 to $120 per m2 or $45 to $100 per hour.
Remember, your total costs will also depend on factors including:
- The tiling material you use
- The size and difficulty of your job
- The demand for renovation in your area
- The state you live in
With beautiful, new tiling in your bathroom or kitchen splashback able to add value to your home, is it time you started a home improvement project that will benefit you today, tomorrow and well into the future?
For more information about our tiling services, or a fast and FREE quote, reach out and chat with Sydney’s favourite tilers today.
The cost of laying tiles per square meter in Moscow and Moscow Region and the price in 2016 of a private master tiler
Tiles as a finishing material will always be popular due to their properties, and the cost of laying tiles is affordable for everyone! Laying tiles by a private master, as well as many other tiling works, are now in great demand. Call and find out the exact price of work per square meter at your facility, as well as discounts and deadlines!
+7 (985) 094-27-61 |
Cost of laying tiles and price per m
2 in Moscow in 2020
(prepared surface)
No. | Name of work | Unit measurements | Price, rub |
1 | Wall and floor tiles in standard size | m 2 | from 900 |
2 | Wall and floor tiles, complex pattern | m 2 | from 1 050 |
3 | Wall and floor cladding with porcelain stoneware | m 2 | from 1000 |
4 | Kitchen backsplash, laying standard size ceramic tiles in a standard kitchen | kit | from 5,000 |
5 | Laying a border, laying a plinth of tiles | m. p. | 250 |
6 | Installation of tile corners, outdoor or indoor | m.p. | 50 |
7 | Tile edge cutting 45° | m.p. | 450 |
8 | Making thresholds from tiles | pcs. | 900 |
9 | Tiling steps and stair risers | m.p. | from 750 |
10 | Sloping tiles | m.p. | 350 |
11 | Grouting tiles | m 2 | 90 |
Surface preparation |
|||
---|---|---|---|
1 | Leveling the floor with a self-levelling compound (leveling screed) | m 2 | from 200 |
2 | Tie device (not more than 5 cm) + installation of beacons according to the laser level | m 2 | from 450 |
3 | Alignment of walls along lighthouses (plaster walls up to 3 cm) | m 2 | from 470 |
4 | Flattening walls | m 2 | 330 |
5 | Reinforcement of the screed with masonry mesh | m 2 | 100 |
6 | Installation of insulation under tiles | m 2 | from 300 |
7 | Turnkey installation of underfloor heating | m 2 | 1500 |
Attention! The final cost of work and discounts for preparing the floor, walls and laying tiles are determined after the foreman inspects the place of work. Departure of the master for free! Cost until completion of work will remain unchanged.
The price of works is indicated without the cost of consumables and building materials!
We work without prepayment upon completion!
By contacting a team of private master Remontami 7 , you can lay tiles at an affordable price not only in the bathroom, toilet or kitchen, although it is in these rooms that the properties of the tile become especially valuable. Modern ceramics allows you to use tiled flooring in living rooms and even bedrooms. Laying tiles at a low cost per job is a big part of finishing when doing renovations.
Walls and floors in the apartment, finished with tiles, are durable, practical and easy to maintain, and the cost of professional work is quite affordable. The technology of its production allows you to choose a tile not only for specific purposes, but also its color, texture and shape for an existing interior.
Benefits of a professional tiler
It is difficult for a person who does not have special professional skills in laying tiles to lay tiles in the bathroom or on the wall in the kitchen. Choosing a color and pattern is not difficult, but it is difficult to choose the right type and size of tiles, given the size and variety of the modern assortment.
Laying tiled floor tiles will differ in technique from laying them on the wall. It is very important to choose the right not only the thickness of the tile and technical indicators, but also the manufacturer. After all, high-quality tiles will serve faithfully for many years.
It is worth considering the curvature of the walls, which many buildings sin now. By laying tiles on a curved wall or on an unprepared floor, you can nullify all the aesthetics and practicality of a tiled floor. Do not forget that with poor-quality tiling, the final cost of the work may increase, as there will be a need for repeated work. Professional tiling by a private master will save you from such problems!
What makes up the cost of laying tiles
The cost of laying tiles by a private master depends on many factors. The area of work, the degree of surface preparation, the amount of consumables matters.
The final price for laying tiles may depend on the size of the tile and its cost. It is more difficult to work with small tiles and the cost of work is higher, and when working with expensive material, the risk of indemnification increases if some fragments are damaged.
Larger areas are easier to work with and therefore you can get a discount on the footage of the work, while laying tiles in a cramped space will cost more.
When laying tiles on the floor, it becomes necessary to level and prepare the floor. This will help the installation of a traditional DSP cement-sand floor screed, and perhaps it will be enough to make only a self-leveling self-leveling floor. When laying tiles on the wall, it is likely that plastering work will be required.
Tiles last a long time, and with proper tiling work, the life of the material can be significantly increased. The surface will look aesthetically pleasing and beautiful.
Call the experts! Our private masters will lay the tiles professionally and efficiently, as they have many years of experience in such work. Experts are well versed in the properties and types of modern tiling, which will help you make tile laying inexpensively.
See also:
Draft repair Standard | Rough repair Comfort | Overhaul Standard |
- Wall tiling
- Floor tiles
- Porcelain stoneware installation
Price list for laying ceramic tiles.
Unit | Price. | |
Drilling holes in tiles | pcs | from 350 r |
Tiling steps | M.p. | from 600 r |
Laying porcelain stoneware and ceramic tiles. | M2 | from 600 r |
Laying clinker tiles, brick or stone effect. | M2 | from 800 r |
Seamless tiling. | M2 | from 1200 r |
Laying porcelain stoneware or tiles diagonally. | M2 | from 800 r |
Laying small tiles (20*20, 15*15, 10*10, 7*15). | M2 | from 800 r |
Laying granite or marble tiles | M2 | from 1200 r |
Laying large format tiles (60*60 cm and more). | M2 | from 800 r |
Laying glass mosaic on mesh backing. | M2 | from 1200 r |
Laying ceramic mosaics on a mesh backing. | M2 | from 1500 r |
Laying mosaics with pattern selection. | M2 | from 2000 r |
Large and small format steps. | M.p. | from 800 r |
Large and small riser installation. | M.p. | from 800 r |
Grouting tiles.
Grouting of tiles (placed by our tilers). | M2 | from 100 r |
Grouting stone, mosaics. (set by our employees). | M2 | from 150 r |
Grouting ceramic tiles (separate service). | M2 | from 150 r |
Stone, mosaic grouting (separate service). | M2 | from 200 r |
Cleaning tile joints from previous grout. | M2 | from 250 r |
Grouting epoxy tiles. | M2 | from 350 r |
Grouting epoxy-based mosaics, stone. | M2 | from 400 r |
Laying tiles with adhesive, epoxy based.
Laying tiles on epoxy adhesive with normal grout. | M2 | from 1500 r |
Laying tiles with epoxy adhesive and epoxy grout. | M2 | from 1800 r |
Laying mosaics, stone on epoxy adhesive with normal grout. | M2 | from 2500 r |
Laying mosaics, stone on epoxy adhesive with epoxy grout. | M2 | from 3000 r |
Laying clinker tiles.
Laying clinker tiles (floor). | M2 | from 800 r |
Laying clinker tiles (walls). | M2 | from 800 r |
Grouting clinker tiles. | M2 | from 150 r |
Laying clinker steps with undercutting. | M.p. | from 1200 r |
Laying radial clinker steps. | M.p. | from 1500 r |
Dismantling of clinker tiles. | M2 | from 200 r |
Replacement of broken clinker tiles. | W.t. | from 300 r |
Waterproofing under clinker tiles | M2 | from 250 r |
Cutting ceramic tiles, natural stone, drilling holes in tiles.
Straight cut tiles | M.p. | from 100 r |
Cutting at an angle of 45 ° ceramic tiles up to 60 cm. | M.p. | from 300 r |
45° angle cut ceramic tiles from 60 cm to 100 cm. | M.p. | from 400 r |
45° angle cut porcelain stoneware up to 60 cm | M.p. | from 300 r |
45° bevel cut porcelain stoneware from 60 to 100 cm. | M.p. | from 600 r |
45° bevel cutting after ceramic tile cutting | M2 | from 300 r |
Drilling holes in ceramic tiles. | W.t. | from 350 r |
Drilling holes in porcelain stoneware. | W.t. | from 450 r |
Additional tiling work.
Removing tiles and old adhesive. | M2 | from 300 r |
Decorative cladding of arches with corner tiles. | M.p. | from 800 r |
Laying tiled skirting board with production. | M.p. | from 1200 r |
Laying ceramic borders. | M.p. | from 450 r |
Laying tiles on slopes. | M.p. | from 600 r |
Installation of electric underfloor heating.
Laying underfloor heating (glass mats). | M2 | from 500 r |
Underfloor heating installation (cable). | M2 | from 600 r |
installation of a thermostat for underfloor heating. | W.t. | from 1200 r |
All prices for finishing works are valid for July – August 2022 and are constantly updated!
PAY YOUR ATTENTION! This section shows prices for primary types of turnkey tile work in Krasnodar.
All works not taken into account are agreed and paid separately. After the formation of the final estimate for tile work, 10% – 15% is added from the total estimate for the repair of the premises for the delivery of material to the facility, unloading the material to the floor, and removal of construction waste.
You may have searched for the price list on:
Drywall installation Door installation Floor repair Ceiling repair Wall repair Dismantling Electrical installation Plumbing Welding
Latest news
in new buildings.
Our specialist is ready to evaluate or audit repairs in an apartment, house or office space where other construction teams have carried out work. The functionality of an employee of Stroykin23.ru includes the following terms of reference:
Site map.
Section Site map – Your guide to the world of apartment, house or office renovation. Here you will find almost everything: prices for services, ordering building materials, expert advice, price list for repairs and much more.
Husband for an hour – minor repairs.
Our service is a master for minor repairs in an apartment, office, private house, it will come in handy when it comes in handy.
If you need to replace a light bulb, a socket, a tap in the kitchen and many other minor repairs, you can always count on our master of minor repairs “Husband for an hour”.
Laying paving slabs in the country house price per m2 on a turnkey basis, the cost of work in Moscow and the region
home
Services
Paving slabs
Attention!!! Dear our customers, we offer a 10% discount for early conclusion of the contract. At the conclusion of the contract in August, for the performance of work in October! Hurry up!
Laying paving slabs
(ready base)
from 550 rubles
work0003
labor + materials
turnkey
Work includes
- laying concrete tiles
- installation of curbs and gutters from 230 rub/m.
- dismantling of paving slabs, concrete, asphalt from 150 rub/m2
Laying of paving slabs with adding sand or dismantling of old tiles
(pedestrian zone or blind area)
from 850 rubles
0003
work + materials
turnkey
Work includes
- geotextile
- rammed sand 100mm
- laying stone
- installation of curbs and gutters from 230 rub/m.
- dismantling of tiles, concrete, asphalt from 150 rub/m2
Installation with complete preparation of the base
(car area or parking)
from 1050 rubles
work
from 2500 rubles
work + materials
turnkey
Work includes
- geotextile
- crushed stone 100mm
- rammed sand 100mm
- laying stone on garden paths
- installation of curbs and gutters from 230 rub/m.
- dismantling of stone, concrete, asphalt from 150 rub/m2
Concreting of the platform and paths with laying tiles
from 1500 rubles
work
from 3500 rub.
- Departure of the measurer to the object and drawing up an estimate free of charge – upon conclusion of the contract. This is necessary for an accurate calculation of the final cost. Prices for work are relevant for volumes of work over 100m2, volumes of work less than 100m2 will be calculated individually!
- The table shows prices for standard types of work. The price depends on the volume, complexity of the work and the type of paving stone.
Attention!!! We carry out objects from 30m2
Risks NO – we work NO ADVANCE PAYMENT
Price for additional work
- Installation of storm water inlets from 1000 rub/pc
- Installation of a road curb at the entrance area “lying” from 700 rubles / m
- Reinforcement with reinforcement from 180 rub/m2
- Adjustment of wells by level from 3500 rub/pc
- Departure of the brigade for repairs outside the warranty period from 20,000 rubles / shift
Construction calculator
Enter the area of laying paving slabs. (m 2 )
How much curb to lay? (meters/linear)
What technology will be used for laying?
with sand bed
with the preparation of a sand and gravel base (or dismantling / installation of tiles)
with poured concrete base
I have a finished base
Your request has been sent! We will contact you shortly.
Materials needed:
Washed sand
3m 3
Crushed stone 5-20
9000 3m 3
Cement
300kg
Cost of work: 75 000 RUD
Examples of work
As we work
9000 1
9000 9000 3,0003 9000 9000 3,000,0003 9000 3,000,0003 9000 3,000,0003 9000 3,000,0003 9000 9000 3,000,0003 9000 3,000,0003 9000 3 consultation, acquaintance with the company and price list!
2
Departure for measurement Site measurement, budgeting, full consultation on the work.
3
Conclusion of the contract. We conclude an agreement with a minimum prepayment and we put you on the schedule.
4
Start of work Agree on the date. A team arrives with materials and begin to work. The manager supervises everything remotely.
5
Commissioning of The team leader and the customer jointly check the actual scope of work for transparency, and the actual estimate is made.
6
Final calculation Calculation of materials after the fact, calculation of installation works in 2-4 stages. After completion, payment is made minus all advances.
Why is it better to order the laying of paving slabs in MosOblTrotuar?
11 full-time teams |
Labor guarantee |
We work |
We will take over the organization |
Undeveloped area? Dirty underfoot? Do you want beauty? Then you to us!
The initial stage of all work is to inspect the site and determine the level of the surface of the site or paths. Also, during the inspection of the site, it is necessary to determine the slope. If the level of the surface is an obvious thing, then with the slope the situation is much more complicated. The most important work is a precise definition: where to direct the water? The process of installing the curb, this is the beginning of work. Borders set the level of the surface, and the slope of the entire work. After installing the curb stone, it becomes clear how much clay to choose, so that after backfilling bulk materials, there is room for mustard and stone. After the curbs are standing, the level is set, we have decided where we take the water out, another stage of work begins.
Types of laying concrete paving slabs
-
laying tiles on a concrete or ready-made base
-
laying paving slabs on the sand (with adding sand or dismantling the old stone)
-
laying with the preparation of a sand-gravel base (cake thickness 300mm)
-
laying tiles with concreting the base (cake thickness more than 400mm)
Installation of curbs | Digging the earth |
Base unit rubble and sand |
Tiling on mix or sand |
Grouting |
|
||
Important! Grout with a dry mix only if the stone is grey. Colored stone is rubbed with quartz sand. |
2. Partially finished base: sanding 100-150mm, compacting and laying concrete paving slabs. It is necessary to dismantle the old stone, concrete, asphalt, level the base and lay the stone. Basically, according to this technology, paths are made at their summer cottage. We dig the soil, lay geotextiles, fill in the sand, tamp and mount the stone. | ||
|
Important! 55% of our clients make mistakes when they calculate the area themselves and 85% make mistakes when they tell us the state of the site at the time the work began. Therefore, it is better to entrust this matter to professionals, especially since we will measure for free on the day of your request, provide a full consultation and make an estimate right on your site |
3. Complete preparation of the base: includes digging the soil, usually up to 200 mm, geotextile, backfilling the base from crushed stone (fraction 5-20) and sand (washed) 100 mm each. We carefully compact each layer with a vibrating plate and lay cement paving slabs on sand or a dry mix. | ||
|
||
We wrote in detail the technology for laying concrete paving slabs in the country. If you wish, you can use our advice and do the installation yourself. |
A step-by-step description will help reduce the cost of landscaping a summer cottage. Under the pedestrian zone, we recommend laying square paving slabs 300-300, 400-400 or 500-500.
Caring for square paving slabs is much easier. Under the parking of cars and trucks, we recommend laying paving stones – a rectangular stone with dimensions of 200×100, which has a thickness of 40mm to 100mm and can withstand loads up to 50,000kg. If paving is being done, curbs must be installed on both sides. The most difficult task of is to determine the type of soil. In many private yards with dry and hard soil, it is enough to select a small amount of soil, and then backfill with sand and lay a stone, which saves you money by 30%. And there are areas where such technology will lead to shrinkage and everything will have to be redone. There are suburban areas where it is necessary to excavate at least 300 mm. It is very important to correctly determine the type of soil and determine the technology. This will help save money and time, and will not lead to further rework. dimensions 200×100, which has a thickness of 40mm to 100mm and can withstand loads up to 50. 000kg. If paving is being done, curbs must be installed on both sides. The most difficult task is to determine the type of soil. In many private yards with dry and hard soil, it is enough to select a small amount of soil, and then backfill with sand and lay a stone, which saves you money by 30%. And there are areas where such technology will lead to shrinkage and everything will have to be redone. There are suburban areas where it is necessary to excavate at least 300 mm. It is very important to correctly determine the type of soil and determine the technology. This will help save money and time, and will not lead to further rework. Prices for all types of work are listed in the tables, the exact price for the work is determined by the company’s engineer during the visit to the site. Prices are listed and fixed.
Important! If you are paving paths or a blind area with a piled foundation, curbs must be installed on both sides so that the stone holds, otherwise, after the first winter, everything will have to be redone, because the tiles will slip |
Trust us – we are professionals with more than 18 years of experience!
FAQ
If our engineer came to your site, carried out an inspection, made an estimate, and we signed an agreement, then the prices are fixed. The final cost may change up or down if the scope of work changes. Or add more work.
We work with cash and non-cash payments. With VAT, without VAT, transfer to a card, and cash payment to the driver upon delivery of the material or to company employees. At the same time, if the payment to the company’s employees is in cash, then we write a receipt for the receipt of money, if by transfer to a card or company, then there is a payment order or a check.
Payment for the material is carried out upon delivery of the material.
Payment for work is carried out in stages “2-4 stages” upon completion of work.
Within the agreed timeframe, our employee will contact you and agree on a start date for the work. On the 1st day, a team and material arrive (if the work is turnkey). The amount of material is agreed with you. As needed, the supply of sand, crushed concrete is organized. All this is agreed with you. Each team has a senior who solves all technical issues (level, slope, laying pattern, etc. ). And also our employee, who supervises the object, remotely solves all the necessary issues related to the object (supply of material, supply of bulk materials, volume added or decreased) and many other issues. Each of our actions is coordinated with you.
Yes, there is a guarantee and it is written in the contract. High reputation and positive reviews are the priority of our company, we always fulfill our warranty obligations. Warranty from 1 to 5 years, depending on the technology of laying paving slabs.
We also deal with
Land plot planning and filling
Paving with paving slabs
Cleaning and clearing the suburban area
Laying and device of a rolled lawn
Concreting of the platform and paths
Drainage of the house
Device blind area around the house
Laying tiles on the floor price per m2 in Moscow
- We will move the furniture
- We will eliminate irregularities
- We will clean up after work
We will come to you, make an estimate, agree on the cost of work with you. We will promptly perform the work and issue all the necessary checks and an extended warranty card.
Pharaoh provides tiling services for customers in Moscow and the Moscow region. The company is a guarantor of the high quality of work performed in a short time.
By calling the Pharaoh company, customers receive full information about the exact cost of laying work and materials. The cost of laying finishing elements is acceptable for our customers, this includes the price of the samples used and the assessment of the work of the craftsmen. The presence of a wide client base testifies to the skill of employees and low prices in our company.
Guaranteed excellent quality
Whatever service you order, no matter how complex the task, you can count on the best performance. Excellent quality – satisfied customers.
type of work | Cost |
Laying tiles |
dated 720 rubles/m 2 | 9000 RUB/m 2 |
Mosaic tile laying |
from 960 rubles/m 2 |
Laying porcelain tile |
from 750 rubles/m 2 |
Stucked walls |
from 350 rubles/m 2 |
The floor alignment KNAUF | 5 – 10 cm from 370 rubles/m 2 9000 | from 90 rub/m 2 |
Laying tiles in the bathroom and installing sanitary ware
Features of laying tiles
When cutting the elements, modern tools are used to avoid excessive dust generation. Carrying out thorough preparatory measures, dismantling old finishing materials makes it possible to lay tiles on any surface.
Our professionals can install flooring elements on any kind of floor surface. This may be a floor made of wood, plywood, warm, as well as a surface with various irregularities.
Redecoration of the kitchen
What kind of tiles can be
The customer chooses the finishing material in accordance with the features of the design, surface, covered area. In each room, functional features and finishing requirements are taken into account.
Tile specification:
- matt finish;
- high gloss;
- water repellent;
- heat resistance;
- tile dimensions.
Scope of tiles
Floor tiling can be done in any room:
- kitchens;
- bathrooms and toilets;
- loggias;
- corridors;
- halls;
- floor coverings in public areas;
- baths and saunas.
The professionals of our company have the skill to take into account the subtleties required for high-quality laying of various tiles, depending on the purpose and type of finishing material.
Laying tiles in the bathroom and toilet
Reasons that affect the prices for the services provided
Prices are calculated individually depending on the following factors:
- Area to be covered.
- Layout of the room and its features.
- Condition of the surface to be installed.
- Type, quality and dimensions of finishing elements.
- Special customer requests.
The list of works also includes preliminary waterproofing and priming of the surface, processing of the obtained seams, removal of the grout.
Kitchen renovation in a country house
Advantages of our company
The services provided by Pharaoh’s specialists are distinguished by the following advantages:
- Provision of a guarantee for performed operations up to ten years.
- Ability to work with the material of the customer, as well as with tiles provided by the company.
- At the conclusion of the contract no advance payment is required, the money is paid in stages during the completion of each operation.
- Work begins after the conclusion of an agreement containing an estimate, work schedules and their payment, a guarantee, fines.
Contact the Pharaoh company serving customers in Moscow and Moscow region. Experienced craftsmen with a narrow specialization, in a short time will perform laying tiles on the floor, using high-quality materials and modern tools.
All services we provide
Interior decoration
We provide professional services for the renovation of apartments, kitchens, rooms, bathrooms in Moscow and Moscow Region.
Interior design
We will create an individual design project for you. Large portfolio of design projects.
Glazing
High-quality glazing of balconies and loggias, order the installation of plastic windows.
Installation of air conditioners
High-quality installation of air conditioners, we will select a system with optimal parameters for your premises.
Supply of materials
We will select and deliver building materials of good quality and at affordable prices.
Stretch ceilings
One of the most beautiful, durable and inexpensive finishes. The variety of shapes, textures, colors allow you to embody any design fantasies.
ORDER AN ESTIMATE FOR WORKS
Prices by type of work
Laying tiles, price per m2 in Ryazan. Tiling cost
Previous
Next
TILE INSTALLATION AND TILE FINISHING
Tile, porcelain tile and tile installation in commercial kitchen, bathroom and wall areas today is considered one of the most successful ways . This method has many positive features: the created flooring is durable, practical to use, resistant to various influences, and besides this, tiled floors look quite attractive.
The variety of shapes and colors of clinker, ceramic, stone and porcelain tiles presented on the market will make it possible to realize the most bold design solution
Where we are performing tiles:
Apartment
7 week. We lay tiles in the bathroom, corridor, kitchen and balcony. Free measurement and estimating.
PRIVATE HOUSES
We work in Ryazan and the region. We do tiling on all surfaces. We work 7 days a week. Free measurement and estimating.
COMMERCIAL
We install tiles in offices, shops, cafes, restaurants, workshops, industrial premises and other non-residential premises. We work 7 days a week all year round.
ONLINE COST CALCULATION
Work in progress | Price | Quantity | Amount | ||||||
---|---|---|---|---|---|---|---|---|---|
Dismantling of old tiles from walls / floor, m2 | 200 rub. | 0r. | |||||||
Wall and floor primer, m2 | 40 rub. | 0r. | |||||||
Wall plastering on lighthouses, m2 | 450 rub. | 0r. | |||||||
DSP device screed / self-leveling floor, m2 | 450 rub. | 0r. | |||||||
Laying tiles on the floor of a standard size, m2 | 900 rub. | 0r. | |||||||
Laying tiles on the floor of non-standard size, m2 | 1200 rub. | 0r. | |||||||
Laying tiles on walls of standard size, m2 | 1000 rub. | 0r. | |||||||
Laying tiles on non-standard size walls, m2 | 1450 rub. | $0 | |||||||
Drilling holes in tiles for plumbing, pcs. | 250 rub. | 0r. | |||||||
Drilling holes in tiles for sockets and switches, pcs. | 350 rub. | 0r. | |||||||
Washed down tiles under 45, m. | 450r. | 0r. | |||||||
Service “Purchase of materials” in Leroy Merlin, Orange through us at wholesale prices | 0 rub. | 0r. | |||||||
Service “Purchase of materials” in any stores by us, all the time | 5000r. | 0r. | |||||||
City delivery, 1 hour | 750 rub. | 0r. | |||||||
Delivery to the region, km. | 20 rub. | 0r. | |||||||
Loaders, general workers, 1 hour | 500 rub. | 0r. | |||||||
Delivery to the region, km. | 20 rub. | 0r. | |||||||
Vehicle garbage disposal Gazelle to landfill, pcs. | 3500 rub. | 0r. | |||||||
Waste removal by container to the landfill (the container is located in the yard up to 1 day), pcs. | 5000 rub. | 0r. | |||||||
Total amount for repairs: 0 rub. |
HOW WE WORK:
- We accept an order, a foreman leaves for the object
- Meeting at the object, measuring the object, discussing the details.
- Drawing up estimates and preliminary calculation of building materials.
- Signing the contract.
- We start with the performance of work within 2 days from the date of signing the contract.
Send us the information in any convenient way and we will calculate the cost of work within 10-15 minutes
VK
Viber
Our advantages:
9000
- 9
- We work cleanly and neatly. We clean up after ourselves
- Low prices
- All workers – Slavs
- We work under the contract, without prepayments. Payment on fact
- has all the necessary equipment and tool
Our tiles laying
Important information on tile laying
Service for laying tiles in Ryazan include the following set of work:
Tiles. occurs only on dry plaster and after all the rough work is completed – the pipes are laid out, the floor screed is made. The base of the subfloor on which you are going to lay the tiles is dry, clean, even and smooth.
It is rather difficult to name the terms for the completion of work without inspecting the object, a lot depends on the quality of the surfaces, the complexity of the work, the working conditions, the quality of the materials with which you will have to work, the quality of the tiles, we will name the approximate dates:
USEFUL ARTICLES ON TILES AND FOR TILE WORKS
3 TOP TYPES OF TILE GLUE FOR APARTMENT REPAIR
Buying tile adhesive is a whole science, responsible business and does not tolerate mistakes. If the glue is of high quality and fits the selected tile, this is very good, since everything will come out faster and there will be no problems during operation. There will be sufficient resistance to external influences, and a high operational period.
Next, let’s go directly to what adhesive should be chosen when laying tiles.
1. Let’s start with the first candidate, a cement-based adhesive.
This type of adhesive remains indispensable and the most common. It looks like a dry mortar, almost like concrete. Before applying it, you need to carefully dilute the glue with water and mix until a homogeneous mass is formed, and then start using. Cement-based adhesive is very good in terms of elasticity.
It should be noted that cement adhesive is suitable not only for tiles, but also for many other purposes directly related to construction.
But this glue has one very significant drawback, which does not allow you to make mistakes when working with it – this is its quick drying. That is, if the tile is laid incorrectly, then somehow it will not work to pry it and fix it, it will tightly grab the tile and that’s it. Accordingly, if the classification of skill when handling tiles does not allow you to act without errors, then it is better to entrust its laying to professionals.
However, there is a way out here too – you can buy cement glue, which contains plasticizers. Such an adhesive is elastic in structure and will harden many times more slowly, due to which it is possible to correct flaws in case of uneven joints.
2. The second type of adhesive that I would like to mention is the one-component adhesive.
One-component adhesive looks like a paste, due to which the error when it is necessary to mix it with other components is significantly reduced. Also, this adhesive is elastic and easy to apply on the surface, it does not dry out quickly in the open air.
3. Two-component adhesive is basically an epoxy or polyurethane type of adhesive.
As a rule, the components included in the two-component adhesive are sold as separate sets. Before direct work on laying tiles, they must be mixed. During the mixing process, a chemical reaction will occur, due to which the mixture is of high quality and powerful, with the necessary properties for laying tiles.
It should be noted that the two-component adhesive can have several degrees of elasticity.
STAGES OF LAYING TILE ON THE FLOOR
Ceramic tiles are a popular finishing material used for laying floors in halls, bathrooms, kitchens and other
rooms. You can mount the coating yourself, it will take from 4-5 hours to 1-2 days, depending on the area. Before laying, it is required to calculate the material and purchase the right amount; it is advisable to take with a margin of 10-15%, so that in the process you do not have to purchase it additionally.
Laying algorithm.
Installation of the flooring is as follows:
– Surface preparation.
It is required to lay a dry or wet screed, level the subfloor, remove dirt and dust, and then prime it.
– Marking the first row, fixing the limiters. You need to start laying from the corner located farthest from the entrance.
– Installation of tiles.
Construction adhesive is applied to the coating with a spatula, after which each piece is placed in place, gently pressed down. It is important to carefully place the tile, since the composition hardens very quickly, and it is extremely difficult to tear off an unevenly placed product. Between the tile fragments, you need to leave a gap, the size of which is regulated by special plastic crosses: it is necessary for the seams.
– After laying the whole tile, it’s time to install the pieces, the shape of which is adjusted to take into account the remaining space, corners, asymmetric places and other nuances. Cutting is performed using a tile cutter, curly tiles are mounted according to the same algorithm.
— At the end of the installation, grouting is done. e is carried out when the solution has completely hardened; the seams are cleaned of debris, a grout is applied to them, after which they are deepened and finalized with a spatula.
After installation, the surface should not be walked on for 12-24 hours. After the final hardening, the coating should be cleaned of dust and debris with a rag.
RULES FOR CLEANING AND CARE OF PORCELAIN GRANITE
In modern bathroom interiors, for finishing walls and floors, most often, porcelain stoneware tiles are used, which are distinguished by good indicators of reliability and strength, and also surpass their analogues in many parameters. Production technologies allow the finishing material to remain safe to use, as well as strong. Porcelain stoneware tolerates strong temperature fluctuations very well, and is also completely not afraid of moisture. The material is very easy and simple to care for. Cleaning individual elements does not take much time and effort.
Basic rules for the care of porcelain stoneware.
After laying the material, it must be thoroughly washed and cleaned of residues of grout or adhesive, which may be on the surface in large quantities. If unwashed plaque remains on the tiles, then dust and small debris will constantly accumulate in these places.
In places where there is a lot of traffic, it is best to choose a matt version of porcelain stoneware, which is less polluted and safer.
Light soiling on porcelain stoneware tiles should only be removed with a soft cloth, damp or dry. Means that include acids in their composition may also be suitable. It is strictly forbidden, when caring for the material, to use abrasive products. Even though porcelain stoneware is very durable, microcracks may remain on the surface after applying this product, which will become very noticeable over time. This rule applies more to polished surfaces, but for a longer preservation of the appearance of the coating, it must be followed. If the tile was used as a floor covering in the hallways, where there is a possibility of bringing a natural abrasive from the street – sand, then in this case, you must always have a vacuum cleaner at hand and remove dry dirt with it.
On the shelves of modern stores you can buy a special care product for this material. It gives additional shine to the outer surface, and can also polish defects in the form of small cracks. Such detergents contain wax, which is not washed off with ordinary water for a long time.
Dried stains from coffee, black tea, as well as wine and juice can be easily removed from the surface of the cream granite tiles using alkaline detergents. Adhesives and paints are easily washed off with solvents such as acetone. Rust stains, as well as dried cement, can be gently washed off with acid-containing products. It is necessary to work with them very carefully, since the seams between individual tiles can be severely damaged by acid.
By following the simple rules of cleaning and maintenance, it is possible to ensure that porcelain stoneware tiles will keep their external surface in excellent condition for a very long time, without changing its characteristics for the worse. When using special products for the care of materials, you must first carefully study the instructions and pay attention to all the recommendations of the manufacturer.
Name
Your phone number
Price for laying tiles in a bathroom in St. Petersburg, prices in St. Petersburg
Plumbing work
Dismantaps
Maular-stucative work
Tile work
Storylar-Street work
Electrical work
plumbing work | ||||
---|---|---|---|---|
No. | Name of work | Unit rev. | Cost | Discount price |
1 | Installing and connecting a bathtub in standard sizes (cast iron/acrylic/steel) | pcs. | 2700/2700/ 2700 | from 2295/from 2295/from 2295 |
2 | Installation and connection of an acrylic bathtub, corner | pcs. | 3800 | from 3230 |
3 | Installation and connection of the whirlpool tub | pcs. | from 5000 | from 425 |
4 | Installation and connection of the toilet bowl | pcs. | 1700 | from 1445 |
5 | Installation and connection of installation | pcs. | 5000 | from 4250 |
6 | WC installation for installation | pcs. | 1000 | from 850 |
7 | Mounting and connection of the installation in the GKL box to the height of the installation | pcs. | 6000 | from 5100 |
8 | Bidet installation and connection | pcs. | 1500 | from 1275 |
9 | Mixer installation standard | pcs. | 800 | from 680 |
10 | Washbasin installation and connection | pcs. | 1200 | from 1020 |
11 | Installation and connection of the washbasin with cabinet assembly | pcs. | from 1500 | from 1275 |
12 | Washbasin installation with hanging cabinet | pcs. | from 1800 | from 1530 |
13 | Towel riser work | pcs. | 1000-2000 | from 850 |
14 | Installation of heated towel rail | pcs. | 2200 | dated 1870 |
15 | Installation of electric towel warmer | pcs. | 1100 | from 935 |
16 | Installation and connection of the washing machine (dishwasher) | pcs. | 1000 | from 850 |
17 | Installation and connection of the boiler (30-50l/50-100l/100-200l) | pcs. | 1500/2000/ 2500 | from 1275/from 1700/from 2125 |
18 | Sewer piping | dot | 600 | from 510 |
19 | Replacement of the central water riser | pcs. | from 4000 | from 3400 |
20 | Replacement of the central sewer riser (PVC/cast iron) | pcs. | from 6000/from 7000 | from 5100/from 5950 |
21 | Replacement of the inlet valve on the finished riser | pcs. | 600 | from 510 |
22 | Replacement tee on the central sewer riser (PVC/cast iron) | pcs. | from 2000/from 4000 | from 1700/from 34000 |
23 | Replacement of cast iron elbow, tee at riser | pcs. | 1800 | from 1530 |
24 | Rehau piping (water/heating) | dot | 2400/ 2700 | from 2040/from 2295 |
25 | Water distribution by points (on tees) | dot | 1700 | from 1445 |
26 | Plumbing by points (manifold type) | dot | 1900 | from 1615 |
27 | Concrete chasing (from 30×30 to 70×70) | p. m. | 700-1000 | from 595 |
28 | Brick chasing (from 30×30 to 70×70) | p.m. | 400-600 | from 340 |
29 | Aerated concrete chasing (from 30×30 to 70×70) | p.m. | 400-600 | from 340 |
30 | Chasing for pipes in reinforced concrete (30×30 /70×70) | p.m. | 1300 | from 1105 |
31 | Installation of shut-off/shut-off valve | p.m. | 600 | from 510 |
32 | Meter mounting | pcs. | 850 | from 722.5 |
33 | Coarse filter assembly | pcs. | 400 | from 340 |
34 | Installing the fine filter | pcs. | 900 | from 765 |
35 | Mounting the self-cleaning filter | pcs. | 1400 | from 1190 |
36 | Podium for shower area | pcs. | 4000-6000 | from 3400 |
37 | Installation of a drain in the shower platform | pcs. | from 500-1000 | from 425 |
38 | Pallet production: size up to 800x800mm. | pcs. | 6000 | from 5100 |
39 | Production of a pallet: size up to 1000x1000mm. | pcs. | 7000 | from 5950 |
40 | Production of a pallet: size up to 1200x1200mm | pcs. | 8000 | from 6800 |
41 | Shower enclosure installation | pcs. | from 3000 | from 2550 |
42 | Installation and connection of the shower enclosure | pcs. | from 6000 | from 5100 |
43 | Shower tray assembly (acrylic, steel/cast iron, stone) | pcs. | 2200/3500 | dated 1870 |
44 | Radiator installation | pcs. | 1700-3000 | from 1445 |
45 | Pipe laying for long distances | p.m | 400 | from 340 |
46 | Installation of PVC screen (sliding, under the bath) | pcs. | 700 | from 595 |
47 | Installation of the GKL screen with tiling | pcs. | from 3200 | from 2720 |
48 | Installation of a niche in the screen under the feet | pcs. | from 800 | from 680 |
49 | Mirror installation | pcs. | 1000 | from 850 |
50 | Booster pump installation | pcs. | 2500-4000 | from 2125 |
51 | Installation of shower panel | pcs. | 1700 | from 1445 |
52 | Mounting check valve | pcs. | 400 | from 340 |
53 | Hardware assembly | pcs. | 350 | from 297.5 |
54 | Mounting pressure reducing valve | pcs. | 550 | from 467.5 |
55 | Assembly of manifold block | pcs. | 1000 | from 850 |
56 | Installing a shower screen on a bathtub | pcs. | from 1200 | from 1020 |
57 | Installation of thermostatic mixer | pcs. | 1700 | from 1445 |
58 | Towel rail attachment | pcs. | 350 | from 297.5 |
59 | Making a hole in the body of the tub for the mixer. Acrylic bath. Insertion of the mixer into the body of the bathtub | pcs. | from 1000 | from 850 |
60 | Installation of a HA shelf at the end of the bath | pcs. | from 1500 | from 1275 |
61 | Transfer and installation of the inlet valve, taking into account the laying of the pipe up to 1 p / m | pcs. | 1200 | from 1020 |
62 | Connection to CHG pipes (PP-polypropylene) | pcs. | 550 | from 467.5 |
63 | Binding to cold water pipes (Steel) threading | pcs. | 1300 | from 1105 |
64 | Installation of noise insulation on the sewer riser | m.p. | 200 | from 170 |
65 | Installing a sanitary curtain on a bathtub | pcs. | 2000 | from 1700 |
66 | Installation of shower doors (corner) | pcs. | 3000 | from 2550 |
67 | Installation of shower doors (straight) | pcs. | 2000 | from 1700 |
68 | Joint sealing (sanitary sealant) | m.p. | 100 | from 85 |
69 | Installation and connection of shower box | pcs. | from 7000 | from 5950 |
70 | Cabin installation and connection: with hydromassage | pcs. | 10% of the cost of | |
71 | Siphon replacement | pcs. | 600 | from 510 |
72 | Installation and connection of a sink (temporary house, used) | pcs. | 800 | from 680 |
73 | Fitting the toilet to prefabricated fixtures | pcs. | 1000 | from 850 |
74 | Shower head installation (external) | pcs. | 1200 | from 1020 |
75 | Installation of a shower head (internal) | pcs. | 2000 | from 1700 |
76 | Installation of shower column | pcs. | 400 | from 340 |
77 | Installing a dryer with bypass | pcs. | 4000 | from 3400 |
78 | Bypass device including valves | pcs. | 2000 | from 1700 |
79 | Installation and connection of instantaneous water heater | pcs. | 1000 | from 850 |
80 | Installation of hygienic shower | pcs. | 1000 | from 850 |
Demolition work | ||||
No. | Name of work | Unit rev. | Cost | Discount price |
1 | Bath removal (cast iron/acrylic/steel) | pcs. | 700/450/350 | from 595/ from 382.5/ from 207.5 |
2 | Removing the shower enclosure | pcs. | from 500 | from 425 |
3 | Washbasin removal | pcs. | 300 | from 255 |
4 | Removing mixer | pcs. | 100 | from 85 |
5 | Dismantling the washing machine | pcs. | 300 | from 255 |
6 | Removing a standard toilet | pcs. | 300 | from 255 |
7 | Dismantling the heated towel rail | pcs. | 300 | from 255 |
8 | Dismantling instantaneous water heater | pcs. | 300 | from 255 |
9 | Radiator removal | pcs. | 300 | from 255 |
10 | Radiator removal (remove/attach) | pcs. | 900 | from 765 |
11 | Dismantling of water pipes (PVC/steel) | comp. | 400/600 | from 340/ from 510 |
12 | Dismantling of sewer pipes (plastic/cast iron) | comp. | 400/600 | from 340/ from 510 |
13 | PVC/tile removal | m2 | 200 | from 170 |
14 | Removing plaster | m2 | 250 | from 212.5 |
15 | Removing plaster from slopes | m.p. | 150 | from 127.5 |
16 | Removing the screed (up to 5 cm) | m2 | 350 | from 297.5 |
17 | Paint stripper (water/oil) | m2 | from 150 | from 127.5 |
18 | Wallpaper removal (1 layer) | m2 | from 100 | from 75 |
19 | Removing the boiler | pcs. | 400 | 340 |
20 | Dismantling of brick partitions | m2 | 350 | from 297.5 |
21 | Removal of partition walls – concrete (up to 6cm / 6-12cm) | m2 | 800/1700 | from 680/from 1445 |
22 | Dismantling of partitions (board, shingles, plaster) | m2 | 400-600 | from 340 |
23 | Partition dismantling: tongue-and-groove, foam block | m2 | 300 | from 255 |
24 | Dismantling of partitions “monolith” (granite) | m2 | 2600 | from 2210 |
25 | Door removal | pcs. | 500 | from 425 |
26 | Dismantling of GKL partitions | m2 | 280 | from 238 |
27 | Dismantling of GKL boxes | pcs. | 300 | from 255 |
28 | Dismantling of wall cladding GKL | m2 | 100 | from 85 |
29 | Washout of lime, chalk | m2 | 150 | from 127.5 |
30 | Fan removal | pcs. | 90 | from 76.5 |
31 | Removing the luminaire: sconces, spotlights | pcs. | 100 | from 85 |
32 | Removing the chandelier | pcs. | 150 | from 127.5 |
33 | Removing the socket, switch | pcs. | 90 | from 76.5 |
34 | Wire removal | m.p. | 60 | from 51 |
35 | Dismantling the electric machine | pcs. | 200 | from 170 |
36 | Dismantling the electric meter | pcs. | 400 | from 340 |
37 | Removing the concrete plinth | m.p. | 550 | from 467.5 |
38 | Removing the concrete threshold | pcs. | from 400 | from 340 |
39 | Removing door trim | pcs. | 100 | from 212.5 |
40 | Laminate removal | m2 | 50 | from 42.5 |
41 | Dismantling of linoleum, carpet | m2 | from 50 | from 42.5 |
42 | Parquet removal | m2 | 150 | from 212.5 |
43 | Dismantling of old floor boards, beam | m2 | 200 | from 170 |
44 | Dismantling plywood, hardboard | m2 | 60 | from 51 |
45 | Dismantling PVC panels | m2 | 100 | from 135 |
46 | Removing the slatted ceiling (without material retention) | m2 | 150 | from 135 |
47 | PVC ceiling removal, armstrong, grillato | m2 | 150 | from 135 |
48 | Dismantling the ceiling from gypsum plasterboard (without saving the material) | m2 | 150 | from 135 |
49 | Removing the screed | m2 | 1000 | from 850 |
50 | Removing styrofoam tiles | m2 | 100 | from 85 |
51 | Dismantling chipboard panels | m2 | 400 | from 340 |
52 | Removing the plinth PVC/wood | m. p. | 50 | from 42.5 |
53 | Window sill removal | pcs. | 400 | from 340 |
54 | Dismantling PVC slopes | pcs. | 400 | from 340 |
55 | Removing the gas stove | pcs. | 300 | from 255 |
56 | Removing the mezzanine | pcs. | from 200 | from 170 |
Painting and plastering works | ||||
No. | Name of work | Unit rev. | Cost | Discount price |
1 | Tie device up to 3cm | m2 | 380 | from 323 |
2 | Tie device 3 to 5cm | m2 | 500 | from 425 |
3 | Expanded clay backfill | m2 | 100 | from 85 |
4 | Screed reinforcement | m2 | 100 | from 85 |
5 | Filling the floor with self-leveling mortar (up to 20mm) | m2 | 250 | from 212. 5 |
6 | Perimeter damping/compensation tape device | m.p. | 50 | from 42.5 |
7 | Plaster mesh | m2 | 100 | from 85 |
8 | Laying waterproofing foil | m2 | 50 | from 42.5 |
9 | Leveling walls with plaster (gypsum/cement) | m2 | 350/420 | from 297.5/from 357 |
10 | Ceiling plaster up to 5cm (gypsum/cement) | m2 | 500/580 | from 425/from 493 |
11 | Installation of beacons with a step from 0.6m to 1.8m (walls, floor) | m2 | 100 | from 85 |
12 | Installation of beacons with a step from 0.6m to 1.8m (ceiling) | m2 | 150 | from 127.5 |
13 | Wall putty for painting (2 coats) K2 | m2 | 320 | from 272 |
14 | Wall putty for painting (shitrok) | m2 | 180 | from 153 |
15 | Installation of plastic corners | m. p. | 50 | from 42.5 |
16 | Reinforced corner installation | m.p. | 100 | from 85 |
17 | Wall painting (2 coats) | m2 | 280 | from 238 |
18 | Wall painting with a roller (textured painting) | m2 | 280 | from 238 |
19 | Wall putty under wallpaper (2 coats) | m2 | 280 | from 238 |
20 | Wall sanding | m2 | 80 | from 68 |
21 | Sanding the ceiling | m2 | 100 | from 85 |
22 | Wallpaper pasting (without pre-drawn/with pre-drawn/liquid/photo wallpaper) | m2 | 280/320/ 520/from 550 | from 238/from 272/from 442/from 467.5 |
23 | Ceiling putty for wallpaper, fiberglass | m2 | 320 | from 272 |
24 | Ceiling putty for painting K2 | m2 | 350 | from 297. 5 |
25 | Ceiling filler for painting (shitrok) | m2 | 220 | from 187 |
26 | Ceiling painting 2 coats | m2 | 320 | from 272 |
27 | Bonding non-woven or fiberglass fabric (walls) | m2 | 200 | from 170 |
28 | Bonding non-woven or fiberglass fabric (ceiling) | m2 | 250 | from 212.5 |
29 | Slope device: primer, beacons, plaster/GCR/PVC (windows/doors) | m.p. | 500 | from 425 |
30 | Slope painting | m.p. | 100 | from 85 |
31 | Leveling slopes / beacons (windows, doors) | m.p. | 400-500 | from 340 |
32 | Antifungal treatment of walls (walls/ceiling) | m2 | 80 | from 68 |
33 | Radiator painting | pcs. | 500 | from 425 |
34 | Pipe painting | m.p. | 150 | from 127.5 |
35 | Textured plaster (decorative) | m2 | 500-1200 | from 425 |
36 | Primer “betocontact” (walls, floor, ceiling) | m2 | 90 | from 75 |
37 | Jointing and patching ceiling rustication | m.p. | 350 | from 297.5 |
38 | Reinforcing seams with sickle tape | m.p. | 50 | from 42.5 |
39 | Radiator niche trim | pcs. | 500r | from 425 |
40 | Wallpaper border | m.p. | 120r | from 102 |
41 | Installation of ceiling plinth up to 5 cm | m.p. | 150 | from 127. 5 |
42 | Installation of ceiling plinth up to 15 cm | m.p. | 250 | from 212.5 |
43 | Painting work on the box: putty 2 layers, sanding, gluing non-woven fabric, primer 3 layers and painting) | m.p. | 540 | from 459 |
44 | Alignment of the crossbar on the beacons, taking into account the putty and installation of the reinforced corner | m.p. | 520 | from 442 |
45 | Alignment of the crossbar visually, taking into account the putty and installation of the reinforced corner | m.p. | 420 | from 357 |
46 | Leveling the plane with gypsum plaster (beam, column) | m.p. | 450 | from 382.5 |
47 | Floor vapor barrier | m2 | 50r | from 42.5 |
48 | Primer (walls, floors/ceilings) 1 coat | m2 | 30/40 | from 25. 5/from 34 |
49 | Sanding walls, ceiling (as a separate job) | m2 | 100r | from 85 |
50 | Soundproofing screed with reflective insulation Penofol | m2 | 50 | from 42.5 |
51 | Painting ceiling plinth (1 layer) | m.p. | 120 | from 102 |
52 | Wallpaper pasting (without drawing / with drawing) On wallpaper costing from 2000 rubles. up to 3500 r. per roll | m2 | 320/400 rubles | from 272/from 340 |
53 | Wallpaper pasting (without pre-drawn / with pre-drawn) For wallpaper costing from 3,500 rubles. per roll | m2 | 450/500 rubles | from 382.5/from 425 |
54 | Installation of plaster molding 10×10 mm (without painting) | p.m. | 330 | from 280. 5 |
55 | Installation of plaster molding 20×20 mm (without painting) | p.m. | 470 | from 399.5 |
56 | Installation of plaster molding 30×30 mm (without painting) | p.m. | 900 | from 765 |
57 | Painting moldings (2 coats) | p.m. | 250 | from 212.5 |
Tiling | ||||
No. | Name of work | Unit rev. | Cost | Discount price |
Laying ceramic tiles from 5 m 2 | ||||
1 | Laying ceramic tiles. Size: 20×30,30×30,40×25, 40×40, 50×30, 50×50 | m2 | 1050 | from 892.5 |
2 | Laying ceramic tiles. Size: 60×30, 60×40, 60×60, 70×30, 70×70 | m2 | 1250 | from 1062. 5 |
3 | Laying ceramic tiles. Size: 80×80, 90×90, 100×20, 100×50, 100×100 | m2 | 1500 | from 1275 |
4 | Laying ceramic tiles. Size: 10×10/15×15, 20×20 20×20, 25×25 | m2 | 1300/1250 | from 1105/from 1062.5 |
5 | Installation of ceramic tiles (imitation parquet, laminate): dimensions 20×60, 20×70, 25×90 | m2 | 1200 | from 1020 |
Porcelain stoneware from 5 m 2 | ||||
6 | Laying ceramic tiles. Size: 30×30,40×40,50×50 / 10×10,15×15,20×20 | m2 | 1200/1250 | from 1020/from 1062.5 |
7 | Laying ceramic tiles. Size: 60×60, 70×70 | m2 | 1350 | from 1147.5 |
8 | Laying ceramic tiles. Size: 80×80, 90×90, 100×100 | m2 | 1800 | from 1530 |
9 | Laying porcelain stoneware (imitation parquet, laminate): dimensions 20×60, 20×70, 25×90 | m2 | 1250 | from 1062. 5 |
Cotto (from 5 m2) | ||||
10 | Cotto tile installation: size 30×30.40×40.50×50 | m2 | 1000 | from 850 |
11 | Cotto tile installation: size 10×10.15×15, 20×20 | m2 | 1350 | from 1147.5 |
12 | Cotto installation: size 60×60, 70×70 | m2 | 1350 | from 1147.5 |
13 | Cotto tile installation: size 80×80, 90×90,100×100 | m2 | 1500 | from 1275 |
Mosaic from 5m 2 | ||||
14 | Laying ceramic mosaic | m2 | 2700 | from 2295 |
15 | Laying glass mosaic | m2 | 3100 | from 2635 |
16 | Laying metal mosaic | m2 | 2900 | from 2465 |
17 | Laying smalt mosaic | m2 | 2900 | from 2465 |
18 | Stone mosaic laying | m2 | 3800 | from 3230 |
Clinker tiles from 5 m 2 | ||||
19 | Laying clinker tiles, dimensions: 5×20, 7×25 | m 2 | 1400 | from 1190 |
20 | Laying clinker tiles, dimensions: 10×25, 10×30 | m² | 1300 | from 1105 |
Installation less than 5 m2 | ||||
21 | Laying tiles with a total area of less than 5 m2 (for all types of tiles) | m 2 | 300 | from 255 |
Grout | ||||
22 | Grouting with cement grout | m 2 | 130 | from 110. 5 |
23 | Grouting with epoxy (two-component, quick-drying) grout | m 2 | 300 | from 255 |
24 | Cement grouting of small tiles (clinker, mosaic) | m 2 | 230 | from 195.5 |
25 | Grouting epoxy (two-component, quick-drying) grout for small size tiles (mosaics) | m² | 500 | from 425 |
Additional tile work | ||||
26 | Grooved pattern tiling | m² | 100 | from 85 |
27 | Seamless tiling | m² | 200 | from 170 |
28 | Laying tiles according to design project | m² | 150 | from 127.5 |
29 | Laying curb, pencil | m.p. | 320/400 | from 272/from 340 |
30 | Laying tiles on slopes less than 8 cm | m. p. | 400 | from 340 |
31 | Installation of a ceramic corner on a bathtub | m.p. | 600 | from 510 |
32 | Difficulty cutting to water outlets, pipes, etc. | pcs. | 250 | from 212.5 |
33 | Laying a plinth of tiles, taking into account the cuts | p.m. | 400 | from 340 |
37 | Difficulty of laying a decorative pattern or panel of a simple design in the size of the main tile | m² | from 400 | from 340 |
39 | Tiled door sill (hydro-threshold) | pcs. | 1000 | from 850 |
Laying the apron | pcs. | 4800 | from 4080 | |
Tile layout | ||||
40 | Diagonal laying (for any type of tile) | m² | 150 | from 127. 5 |
41 | Laying in complex patterns (any type of tile) | m² | 220 | from 187 |
42 | Laying offset (to any type of tile) | m² | 100 | from 85 |
Working with outside and inside corners of tile | ||||
43 | Wash down 45 degree angles (on one side) | m.p. | 500 | from 425 |
44 | Installation of plastic/metal laying on the outer and inner corners of the tile | m.p. | 200/300 | from 170/from 255 |
Surface preparation for cladding | ||||
45 | Wall notching (fine/coarse) | m² | 150/200 | from 127.5/from 170 |
46 | Waterproofing device 2 layers (mastic) | m² | 200 | from 170 |
47 | Sealing corners with waterproofing tape | m. p. | 100 | from 85 |
48 | Access hole in tiles/granite | pcs. | 200/300 | from 170/from 255 |
Carpentry | ||||
No. | Name of work | Unit rev. | Cost | Discount price |
1 | Laminate flooring (seamless/seam textured) | m2 | 300/360 | from 255/from 306 |
2 | Installation of quartz-vinyl laminate (PVC tiles) floating/adhesive | m2 | 350/500 | from 297.5/from 425 |
3 | Linoleum flooring | m2 | 220 | from 187 |
4 | Carpet flooring | m2 | 200 | from 170 |
Engineered board decking | m2 | 500 | from 425 | |
5 | Mounting thresholds on the floor (straight/shaped) | m. p. | 350/450 | from 297.5/from 382.5 |
6 | Skirting installation (PVC/wood) | m.p. | 130/220 | from 110.5/from 187 |
7 | Mortgage mounting (profile, plywood) | t. to | 160 | from 136 |
8 | Arrangement of partitions: from tongue-and-groove slabs of foam blocks, gas blocks | m2 | 860r | from 731 |
9 | Arrangement of boxes from GKL | pcs. | 1500-4000 | from 1275 |
10 | Installation of partitions from plasterboard (1 layer) (at least 1000 rubles). | m2 | 660 | from 561 |
11 | Installation of partitions from plasterboard (2 layers) | m2 | 760 | from 646 |
12 | Noise insulation of partitions made of GKL (Penoplex/MaxForte) | m2 | 100/800 | from 85/from 680 |
13 | Installing a plastic plumbing hatch (PVC/metal) | pcs. | 200/400 | from 170/from 340 |
14 | Installation of a concealed sanitary hatch | pcs. | 1500-3000 rub. | from 1275 |
15 | Mounting the ventilation grille | pcs. | 300 | from 285 |
16 | Wall cladding with PVC panels (with batten installation) | m2 | 700 | from 595 |
17 | Installation of ceiling with PVC panels (toilet/bath) | comp. | 3000 | from 2550 |
18 | Installation of ceiling with PVC panels | m2 | 750 | from 637.5 |
19 | Mounting a slatted ceiling up to 5 m2 (toilet/bathroom) | comp. | 3000 | from 2550 |
20 | Mounting a slatted ceiling over 5 m2 | m2 | 750 | from 637. 5 |
21 | Installation of a ceiling made of GKL single-level | m2 | 560 | from 475 |
22 | Installation of a two-level ceiling from GKL | m2 | 660 | from 561 |
23 | Installation of a two-level ceiling with curved elements | m2 | from 800 | from 680 |
24 | Interior door assembly | pcs. | 3200 | from 2720 |
25 | Formation of a doorway in a plasterboard wall | pcs. | 1200 | from 1020 |
26 | Door opening extension | pcs. | from 600 | from 510 |
27 | Cutting an opening in a wall | m2 | 3500 | from 2975 |
28 | Installation of door architraves | pcs. | 300 | from 255 |
29 | Plywood flooring | m2 | 240 | from 204 |
30 | Arrangement of an arch made of plasterboard | pcs. | 3000 | from 2550 |
31 | Window sill assembly | pcs. | from 750 | from 637.5 |
32 | Parquet flooring (lock/adhesive) | m2 | 420/500 | from 357/from 425 |
33 | Installation of straight decorative boxes | m.p. | 700 | from 685 |
34 | Arrangement of plasterboard ceiling boxes along the perimeter of the room up to 500x500mm with a cornice for LED strip | m.p. | 900 | from 765 |
35 | Installation of decorative curved boxes | m.p. | from 900 | from 765 |
36 | Mounting the cornice | m. p. | 600 | from 510 |
37 | Wall cladding GKL | m2 | 600 | from 510 |
38 | Separate ventilation duct connection to shaft | pcs. | 500-1000 | from 425 |
39 | Log device | m2 | 270 | from 229.5 |
40 | Dry floor Knauf (including backfilling, edge sound insulation, polyethylene waterproofing) | m2 | 1100 | from 935 |
41 | Installation of an interior swing door | pcs. | 3500 | from 2975 |
42 | Installation of interior sliding door outside | pcs. | 3500 | from 2975 |
43 | Installation of interior sliding sliding door | pcs. | from 5000 | from 4250 |
44 | Fitting extensions to the door | m. p. | 250 | from 247.5 |
45 | Door frame undercut on both sides of the door – set | set | 1000 | from 990 |
46 | Solid wood flooring | m2 | 1600 | from 1360 |
47 | Laying sheet underlay | m2 | 50 | from 42.5 |
48 | Cork interlock flooring | m2 | 380 | from 323 |
49 | Adhesive cork flooring | m2 | 440 | from 374 |
50 | Diagonal laying (for any type of flooring) | m2 | 170 | from 144.5 |
51 | Extension of the doorway GKL | pcs. | 1500 | from 1275 |
52 | Extension of a doorway from PGP-groove slabs, foam blocks, gas blocks | pcs. | 2000 | from 1700 |
53 | Installation of plasterboard ceiling ducts along the perimeter of the room up to 500×500 mm | m.p. | 650 | from 552.5 |
54 | Armstrong ceiling installation from 5 m2 | m2 | 550 | from 467.5 |
55 | Grilyato ceiling installation. | m2 | 500 | from 425 |
56 | Sticking polystyrene tiles to the ceiling | m2 | 270 | from 229.5 |
57 | Installation of wooden shelves | pcs. | from 300 | from 255 |
58 | Mounting grille | pcs. | 600 | from 510 |
59 | Ceiling soundproofing: foam/MaxForte | m2 | 120/1000 | from 102/ from 850 |
60 | Floor soundproofing: foam/MaxForte | m2 | 100/550 | from 85/ from 467. 5 |
61 | Vapor barrier device (foil film) | m2 | 50 | from 42.5 |
62 | Thermal insulation device (mineral wool) | m2 | 130 | from 110.5 |
Electrical work | ||||
No. | Name of work | Unit rev. | Cost | Discount price |
1 | Cable management (external, internal) | m.p. | 90 | from 51 |
2 | Installation cable channel, corrugations | m.p. | 50 | from 42.5 |
3 | Installation of outdoor socket (1st/2nd/3rd/4th) | pcs. | 300/400/ 500/600 | from 255/ from 340/ from 425/ from 510 |
4 | Installation of sockets and switches | pcs. | 330 | 280. 5 |
5 | Socket box device (GKL, PGP) | pcs. | 170 | from 144.5 |
6 | Socket box device (concrete) | pcs. | 350 | 297.5 |
7 | Reinforced concrete (rebar) | pcs. | 600 | from 510 |
8 | Switch block replacement | pcs. | 1200 | from 1020 |
9 | Installation of a spotlight (internal) | pcs. | 250 | from 212.5 |
10 | Installation of double spotlight (internal) | pcs. | 450 | from 382.5 |
11 | Luminaire assembly | pcs. | 300-500 | from 255 |
12 | Chandelier assembly | pcs. | from 500 | from 425 |
13 | Chandelier hook mounting | pcs. | 100 | from 85 |
14 | Exhaust fan mounting: against light/button | pcs. | 800/1400 | from 680/ from 1190 |
15 | Installation of a junction box: external / internal in drywall, gas-block / internal in concrete | pcs. | 300/400/600 | from 255/340/510 |
16 | Installation of underfloor heating, el. | m2 | 150 | from 127.5 |
17 | Underfloor heating installation kit-mat electric cable | m2 | 250 | from 212.5 |
18 | Temperature controller installation: concrete/in HWP, brick | pcs. | 2000/1500 | from 1700 / from 1275 |
19 | Illuminated mirror installation | pcs. | 1400 | 1190 |
20 | Chasing 2×2 cm: aerated concrete/concrete | m. p. | 130/350 | from 110.5/ from 297.5 |
21 | Groove termination | m.p. | 60 | from 51 |
22 | Mounting LED strip | m.p. | 220 | from 187 |
23 | Installing the power supply to the LED strip | pcs. | 450 | from 382.5 |
24 | Electric meter replacement | pcs. | 2000 | from 1700 |
25 | Mounting the power socket for electric stove | pcs. | 630 | from 535.5 |
26 | Installation of a bell with a button or an audio intercom | pcs. | 600 | from 510 |
27 | Video intercom installation and connection | pcs. | 900 | from 765 |
28 | Installation and connection of kitchen hood | pcs. | 1000 | from 850 |
29 | Difficulty in mounting a walk-through switch (2 pt.) | pcs. | 1000 | from 850 |
30 | Difficulty of installation of the pass switch (Ztchk.) | pcs. | 1500 | from 1275 |
31 | Chasing 2×2 cm: aerated concrete/concrete | pcs. | 350 | from 297.5 |
32 | Socket box device (GKL, PGP) | pcs. | 170 | from 144.5 |
33 | Distribution and wiring in junction box | comp. | 300-600 | from 255 |
34 | Replacing the front panel of the finished socket | pcs. | 300 | from 255 |
35 | PVC vent/duct wiring | m.p. | 300 | from 255 |
36 | Connection to the finished machine in the electrical panel | pcs. Scroll Up |