Average water heater replacement cost: Reviews by This Old House
Is the Average Water Heater Replacement Cost Expensive?
When you have problems with your hot water heater, you need to determine whether it is better to repair it or replace it. One important consideration is the average replacement costs of hot water heaters, which depend on four factors:
- Age of the water heater. On average, tank-type heaters last between 10 to 15 years. Tankless heaters tend to last up to 20 years. If your current heater is nearing the end of its useful lifespan, it might be worthwhile to have it replaced rather than repaired.
- Cost of repairs vs. replacement. You need to compare the costs of repairs to the cost of having a new water heater installed. For instance, your estimate for repairs is $500, and the cost to get a new tank-type heater is $700. Since there is not much difference in cost for this scenario, it would be better to invest in a new water heater.
- Type of water heater. The type of water heater being replaced does influence the cost. Electric heaters tend to cost less compared to natural gas and propane-type heaters. There are also variances in costs between tank-type and tankless heaters you need to evaluate.
- Size, capacity and/or gallons per minute of the heater. For tank-type heaters, there will be differences in cost based on the size and capacity of the heater, as well as the number of gallons per minute it will deliver. For tankless heaters, there are variances in cost based on the gallons per minute of hot water the heater can generate.
Whether the average replacement cost is expensive will vary based on your budget and household needs. Costs run from around $800 with installation to several thousands of dollars for a high-end tankless system. Please keep in mind, to determine your actual replacement costs, you would need to request a free quote.
Aside from the replacement costs for a new water heater, it is equally beneficial to weigh the pros and cons between tank-type and tankless heaters.
Tank-Type Pros
- Ideal for homes that have a large hot water demand at the same time.
- Costs tend to be less than tankless heaters.
- Installation processes and time is often less.
- Electric tank heaters are up to 90% energy efficient.
Tank-Type Cons
- Hot water temperatures have to be constantly maintained.
- Tanks need their own dedicated space inside the home.
- Tanks have to be installed over emergency drain pans, with added drain lines.
- Shorter average lifespan compared to tankless heaters.
Tankless Pros
- More energy efficient than tank-type heaters.
- Can help reduce water heating energy bills by as much as 25%.
- Only has about a 5% heat loss, compared to up to 30% with tank-based heaters.
- Never run out of hot water.
- Requires a smaller space to install.
- More flexibility with where the heater can be installed.
- Lasts around 20 years.
Tankless Cons
- Takes much longer to install.
- Retrofitting can require new plumbing.
- Could require multiple units to meet a home’s hot water demands.
- Costs can average upward of twice the cost of tank-type heaters.
For assistance in deciding what type of hot water heater is best for your home, and a free water heater installation and replacement quote, please feel free to contact your nearest Christianson Air Conditioning & Plumbing location today!
Tags: Water Heater Replacement, Water Heater Replacement Cost
Water Heater Replacement Cost Calculator (2022)
Water heater replacement costs typically run between $800 – $1,900 for a tank, or $1,000 – $3,800 for a tankless. The vast majority of these costs is the price of the unit itself, with plumber labor to install costing an additional $600 – $1,500.
Gas water heaters tend to cost $300 – $900 more than electric ones to install. However, gas models may have lower operating costs in the long run.
Use our helpful water heater replacement cost calculator below to get a ballpark price near you.
Hot Water Heater Costs | Zip Code | Units | |
---|---|---|---|
Basic | Better | Best | |
Hot Water Heater – Material Prices | $330.00 – $450.00 | $550.00 – $750.00 | $800.00 – $1200.00 |
Hot Water Heater – Installation Cost | $750.00 – $900.00 | $1200.00 – $1450.00 | $1500.00 – $2350.00 |
Hot Water Heater – Total | $1080.00 – $1350.00 | $1750.00 – $2200.00 | $2300.00 – $3550.00 |
Hot Water Heater – Total Average Cost per Unit | $1215.00 | $1975.00 | $2925.00 |
How much does it cost to install a water heater?
The average water heater installation cost is between $800 and $1,200, not including the hot water tank. Depending on if you choose a 40 or 50 gallon tank size, a water heater cost $600 and $1,900 on the low and high-end. Labor costs of a HVAC company ranges between $75 to $150 per hr.
Very few home owners don’t realize how important a solid working water heater is, until it stops working – hopefully, not in the middle of a shower… Having said that, a general rule of thumb is to know that the life-span of a water heater is roughly 10-15 years.
Save money by checking for possible Federal tax rebates on energy efficient water heater systems.
National Average | $1,350 |
Low | $650 |
Mid-range | $1,200 |
High-end | $1,850 to $3,850 |
Hot Water Heater Cost By Type
The average cost to install a new hot water heater is $850 to $3,800. The cost depends entirely on the type of system and size you choose and the fuel source.
Type | Unit Cost |
Average Installation Cost |
---|---|---|
Standard Tank (Electric) | $600 – $1,900 | $650 – $1,500 |
Tankless (Electric) | $1,200 – $2,400 | $1,200 – $2,400 |
Standard (Gas) | $1,400 – $2,600 | $1,500 – $1,800 |
Tankless (Gas) | $1,200 – $3,800 | $1,800 – $2,800 |
Standard (Propane) | $1,200 – $1,900 | $1,200 – $2,400 |
Tankless (Propane) | $1,400 – $2,800 | $1,200 – $2,800 |
Indirect | $1,200 – $2,300 | $1,700 – $3,200 |
Hybrid Heat Pump | $1,100 – $2,600 | $1,200 – $2,800 |
Solar | $1,800 – $2,600 | $2,900 – $4,800 |
Standard Hot Water Tank Cost vs Tankless
A tankless water heater installation costs $1,200 to $2,400 total on average. Tankless water heaters are more energy-efficient, last longer, and provide an unlimited supply of hot water on-demand. The average household spends $600 to $1,800 annually on water heating or about 21% of their total energy bill.
If you have a family of four and use 80 gallons of hot water each day, tankless water heaters can save you $100 or more per year on your energy bill. And since they last up to 20 years, compared to just 10 years for a standard storage tank model, you’ll come out ahead in the long run, too.
Standard Gas Water Heater Cost Vs Electric
The average cost to install a gas water heater will run $1,200 – $1,800 for a traditional tank or $1,500 – $2,800 for a tankless model. This does not include the price of the unit itself which can range from $600 – $1,800 more than an electric heater. However, gas heaters are less expensive to operate, costing about $220 per year less on average.
Electric water heaters have a slightly lower installation cost, typically running $600 – $1,900 for a tank or $1,200 – $2,400 for a tankless. Electric heaters also last 2-3 years longer on average than gas models. So while the initial investment is higher for a gas water heater, it will typically pay off in the long run.
Tank vs Tankless systems
Tankless water heater systems are considered to be the top-dogs in energy efficiency, however, there are some pros and cons to owning one and I personally do. For one, the cost of tankless water heater installation is about 3x that of traditional hot water tank. Secondly, you’ll find it hard to run multiple appliances at once consuming hot water – tankless just can’t keep up with a large family. I own a Rinnai tankless gas heater system with a family of four it works perfectly fine with the occasional loss of hot water – not enough to be upset about. I do however, save on average $100 per year over a traditional water tank setup.
Tank water heaters these are your traditional heater systems that hold a large reserve of water that’s being constantly heated to maintain hot water. They are cheaper to purchase and install, but this system will cost you more energy in the long-run. Generally, a 40-gallon tank will provide enough hot water for 2-3 people and a 50-gallon will work for 3-4 people. 80-gallon systems are usually for a family of 5 or more.
The Average Cost to Install a High-Efficiency Water Heater Tank
A high-efficiency water heater costs on average $800 – $1,600 for the unit not including installation. High-efficiency systems not only help you save money on your energy bill but they also heat water quickly and minimize heat loss. These types of water heaters are up to 300% more energy-efficient than standard tank water heaters, making them a great choice for eco-conscious homeowners.
Type | Average Cost Installed |
---|---|
Solar | $1,800 – $4,900 |
Indirect | $1600 – $4,800 |
Hybrid Heat Pump | $1,400 – $2,600 |
Solar Water Heater Cost
Solar water heaters are a great way to save on energy costs. They can range in price from $3,700 to $6,000 installed. However, with federal tax rebates, you might be able to reduce that cost by 1/3rd. Solar water heaters work by using the sun to heat water. This can reduce your energy costs by up to 80% and they also work with either gas or electric water heaters.
Indirect Hot Water Heater Installation Cost
The average installation cost of Indirect water heater is $1,650 – $3,300 for labor and the unit itself will run you about $1,300 – $2,500. These types of systems are very efficient given that it piggybacks off of your existing boiler tank as a source of heat.
Hot Water Heater Tank Prices
Different models of water heaters come in sizes ranging from small 20-gallon models to larger 80-gallon units. The smaller models are more efficient for smaller homes with one or two people, meanwhile, the larger units are perfect for families of 4+ or more.
The cost of a water heater will also differ based on the type of fuel it uses. Gas models tend to be more expensive than electric models, but they are also more energy-efficient. Solar-powered water heaters are the most expensive option, but they are also the most environmentally-friendly.
Tank Size | Unit Cost |
30-gallon | $450 – $600 |
40-gallon | $550 – $700 |
50-gallon | $650 – $850 |
60-gallon | $750 to $1,100 |
75-gallon | $800 to $1,250 |
80-gallon | $1,250 to $1,950 |
Hot Water Heater Tank Brand Prices
Brand | Warranty |
*Unit Cost |
---|---|---|
Rheem | 6 – 12 years | $950 – $1,900 |
A. O Smith | 6 – 12 years | $600 – $1,700 |
American Standard | 6 – 12 years | $600 – $900 |
Rinnai | 6 – 12 years | $750 – $2,400 |
Kenmore | 6 – 12 years | $400 – $900 |
Average Labor Cost To Install a Water Heater
The average local plumbers labor cost to install a water heater is $700 to $1,500. This will depend on the type of water heater that needs to be installed and the complexity of the installation. Licensed & Insured plumbers will either charge a minimum 4-hour rate if it’s a basic install at $85 – $150 per hour or quote the job if it’s complex — click here for a free quote.
Water Heater Installation Cost By Service Provider
Service Company |
Average Cost Installed |
---|---|
Plumber | $600 – $1,200 |
Home Depot | $1,600 – $2,200 |
Lowes | $1,900 – $2,600 |
Home Depot Water Heater Installation Cost
Home Depot charges anywhere from $1750 to $2,400 for the installation of a tank water heater. This usually covers everything from hiring a licensed plumber, pulling permits if required, removing the existing water tank, and installing a new system.
Lowe’s Water Heater Installation Cost
Lowe’s usually charges around $800 to $2,100 for a typical water heater installation. This would include hiring a licensed plumber, pulling the necessary permits, removing your old water heater, and having a new system installed. However, if your home needs to have new pipes installed to be code-compliant, Lowe’s will charge additional money for this service.
Both of these stores typically offer a free in-home assessment to determine which system would be best for your home as well as provide you with a more accurate quote.
How To Choose The Right Water Heater Tank Size
When searching for the right water heater, one of the most important factors to consider is the first-hour rating (FHR). The FHR is a measure of how much hot water the tank can produce in an hour and reflects the appliance’s efficiency. It’s important to choose a water heater with an FHR that meets or exceeds the peak hour usage needs.
For example, if you have a family of four and everyone is doing something with hot water at the same time during the busiest hour of the day. When estimating your family’s peak hour usage, keep the following numbers in mind:
- Taking a shower: 20 gallons
- Running a dishwasher: 14 Gallons
- Running a washing machine: 20 gallons
- Washing hands: 3 gallons
- Washing Dishes by hand: 7 gallons
- Shaving: 3 gallons
In the example above, you’ll need at least 80 gallons of hot water. If you choose a water heater with an FHR of 90 gallons, you’ll have plenty of hot water to go around.
Water Heater Installation Cost by Type of Vent
There are three main types of vents that can be used for a water heater: atmospheric, direct, and power. The installation cost will vary depending on the type of vent you choose.
Type | Average Cost Installed |
---|---|
Atmospheric Vent | $350 – $500 |
Direct Vent | $350 – $700 |
Power Vent | $600 – $900 |
Atmospheric Vent
An atmospheric vent is the most common type of vent and is typically used for standard tank or gas water heaters. This type of vent pulls indoor air from around the water heater and vents it through a vertical duct. This vent can be installed to use either an existing duct or a chimney that is already in place, saving the homeowner money. The installation cost for this type of vent is roughly $350 – $500.
Direct Vent
A direct vent is less common than an atmospheric vent but can be used for both tank and tankless water heaters. This type of vent, just like the Atmospheric uses the air surrounding the unit and safely vents gases through the exterior wall by PVC pipe kit. The installation cost for this type of vent is typically $350 – $700.
Power Vent
A power vent is typically used for tankless water heaters and similarly, as other types of water heater vents, uses the air surrounding the unit to help flush out gasses using an electric blower motor fan that either vents horizontally or vertically. The installation cost will run you about $600 – $900.
Water Heater Replacement Cost Factors & Considerations
With the average water heater replacement costing between $600 – $1,900 for a standard tank water heater and about $1,200 – $3,600 for a tankless setup, other factors contribute to the cost of installation.
Additional costs include: Permits, bringing plumbing up to code, modifying fuel sources, or the need for electrical or carpentry work all play a role in additional costs and the plumber you decide to hire should be competent enough to foresee this when quoting you a price.
Water Heater Tank |
$600 – $2,800 |
Permit & Local Fees | $40 – $150 |
Removal of old hot water tank | $150 – $300 |
Labor Cost | $650 – $1,850 |
Updating Plumbing to Code | $400 – $900 |
Extended Warranty Cost | $75 – $150 |
Expansion Tank | $150 – $250 |
Electrician | $450 – $750 |
Converting Fuel Source | $350 – $900 |
Permit & Local Fees
The costs can vary from state to state, however, most charge between $10 – $25 per $1,000 of the total job cost. For example, if your new water heater total installation cost is $4,000 – expect your permit fees to be roughly $40 – $200. This covers the costs of having a local plumbing inspector to ensure your job is being done properly and to code – this is the cheapest bit of insurance anyone could get, so avoid any plumbing company who tries to work without one.
Removal Of Old Hot Water Tank
The cost to remove an old hot water heater tank is $150 – $300 and this covers the plumbers time to safely and properly dispose of your old system.
Water Heater Expansion Tank Cost
The cost of a water heater expansion tank can range from $150 – $250. This cost includes the price of installation. An expansion tank is beneficial because it provides the needed space to relieve the pressure inside the system – you will also help extend the life of the system and prevent costly damage by doing so.
Many local and state codes require an expansion tank when upgrading a water heater tank. Additionally, if you don’t have an expansion tank, most manufacturers will void your warranty. So it’s a good idea to have one to protect your investment.
Cost To Convert From Electric To Gas Water Heater
If you have an existing gas supply line, the cost to convert from an electric to a gas water heater is generally $350 – $900. However, if you don’t have a gas supply line, the cost can be significantly higher. Converting from gas to electric water heater is going to cost you $450 – $750 for having an electrician wire up a dedicated panel to supply your new tank.
Hot Water Heaters – Pricing and Installation Cost Checklist
- Expect the prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
- Try to get prices in the spring – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
- Try to budget and additional 7-15% more on top of what our calculator gives out for hot water heater costs.
- Visit every supply house that sell your particular brand of hot water heater and try to negotiate a better price with each supplier – I save on average 20%.
- A hot water heater installation isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a HVAC contractor to perform the work for you. HVAC companies will most always get better prices on Hot Water tanks — saving your back and additional costs of hot water tank, so shop around, ask your neighbors if they can recommend someone.
How to know when your water heater needs replacing?
- There isn’t enough hot water
- The water appears rusty – this is due to sediment buildup from over the years
- Noises, as sediment builds up the contaminants in the tank heat and cool causing noises in the tank.
- Leaks – this happens a lot in older units as the tanks age, the base begins to rot out and leak
- Check the age of your unit by looking at the first two serial numbers on your tank, this will represent the year manufactured. If not, look up the model unit.
View Other Water Heater and Filtration Costs: From Gas, Electric, Tankless & More
- Electric
- Gas
- Water Filtration
External References:
- Energy. gov — Energy Cost Calculator for Electric and Gas Water Heaters. Added July 17, 2015
- Hud Path — Volume 8 Rehab guide – Estimating HVAC/ Plumbing
100 people found this helpful. Was this guide helpful to you?
What Others are paying:
Comment:
Replacing the heating element in the Boiler ᐈ price from 300 UAH – Master911
Common breakdowns and causes of failure of the water heater
- As practice and experience of our masters show, in most cases the cause of the failure of the heating element, and in accordance with the replacement of the heating element in the boiler ( Ariston, round, Atlantic) stands for the untimely maintenance and cleaning of equipment. As a result of violation of the manufacturer’s recommendations, scale accumulates on the elements of the water heater, which is largely due to the low quality of running water, or a blockage occurs due to the lack of special filters.
- A malfunction of the water heater can also be associated with sudden voltage drops in the mains.
Replacing a heating element in a water heater is one of the most common requests received by boiler repair services. Carrying out diagnostics, an experienced master will definitely explain the reason for the failure of this part, which will help extend the life of the new heating element.
Reasons for failure of the heating element
Reasons for replacing the heating element in the boiler (Ferolli, Ariston) are:
- Increased hardness of running water (it can be reduced by installing a special filter).
- Absence of normal mains voltage. If this is observed regularly, then there is a high risk of overheating of the heating element core, and sometimes its complete burnout. To protect equipment from power surges, you should think about installing a stabilizer.
- Thermostat failure. A broken thermostat is not able to regulate the operation of the heating element, which can lead to its overheating. It is impossible to predict this, only a periodic inspection by a specialist of the heater and thermostat can help.
- Untimely replacement of the magnesium anode – a part that performs the protective function of the heating element. Because of this, the anode is not able to eliminate the negative effect of water on the element, and as a result, it will break.
Master911 around the clock accepts applications for installation, maintenance, cleaning, diagnostics and repair, or if you need to replace the heating element in the boiler Termex, Garanterm, Electrolux, as well as from other manufacturers: Gorenje (Gorenie), Ariston (Ariston), Electrolux ( Electrolux), Atlantic (Atlantic), Thermex (Termex), Bosch (Bosch), Atlant (Atlant), Ferroli (Ferroli / Feroli), Termet (Termet), Zanussi (Zanussi / Zanussi), Baxi (Baksi), Nova Tec ( Novatek), Round (Round), Hi-Therm (High Term), Vaillant (Vaillant / Vaillant), AEG (AEG), Thermona (Termona), Garanterm (Garanterm), Indesit (Indesit), Tesy (Tesi), Aston ( Aston), Termal (Thermal), Fagor (Fagor), Garanterm (Garanterm), Roda (Roda), Seagull, Atmor (Atmor), Willer (Viller / Wheeler), Amina (Amina), Galmet (Galmet), any models, regardless of the year of manufacture.
Attention!
- Do not attempt to replace the heater element yourself. Changing the heating element in a boiler is a serious and responsible task, the solution of which requires the performer to have the necessary knowledge, technical skills and experience. To undertake such work, armed with information from YouTube (yoytuba), is to put at risk not only equipment, but also your own health. We must not forget that a storage water heater is nothing more than a vessel under high pressure, which is connected to the electrical network and has contact with water.
- Do not use broken equipment. There are many signs that indicate that the boiler needs to be repaired or cleaned immediately. Ignoring the need to clean the water heater contributes to failure, which will result in the need for an expensive overhaul. If any malfunctions in the operation of the boiler are detected (as if there are extraneous sounds, insufficient water heating, the presence of rust in the water, etc. ), it must be disconnected from the network and contact an experienced specialist of a proven service who understands exactly how to repair boilers.
-
Do not use the services of questionable craftsmen. Boiler repair at home is a popular service that can be ordered on various sites. You must clearly understand that you have a high risk of falling for a swindler or an unscrupulous master with little experience. If you need to change the heating element in the water heater, contact only trusted specialists!
Unverified craftsmen occasionally give a guarantee, and then mostly only in words, without any written obligations. Do not try to save money, as a result, you will only pay more for the main breakdown and fixing poor-quality repairs from a crooked handyman!
Use the services of only proven masters, which you can order in our service!
What do you get?
- We work 24/7. Round-the-clock acceptance of applications at any time of the day or night.
- Fixed price. The cost of services corresponds to the price list and does not change after the arrival of the master.
- Comfortable payment. We accept payment in cash or by bank transfer.
- Quick exit. Our master arrives for 3 hours. This is because our masters are physically located in almost all settlements of the region.
- Cleanliness and order. Our craftsmen monitor cleanliness and tidiness, be sure to clean the workplace.
- Affordable prices. Prices correspond to the experience of a specialist, we also select a master who is closest to the place of departure (save on transport).
- Warranty. Guaranteed liability for services rendered and replacement parts/parts.
- Agreement. We work under a contract-offer. At the end of the services provided, the client receives a certificate of completion.
Replacing the heating element in the boiler. How to order?
- Submit applications. You can apply by phone. or leaving it on the site.
- Clarifying questions. When submitting an application, we recommend that you answer a few clarifying questions, this will allow you to answer the question “how much does it cost to replace a heating element in a boiler?”.
- Arrival of the master + work. Approximately within 3 hours after the application is made, the master goes to the specified address and provides the ordered services.
Call a master to replace the heating element
If you are interested in an urgent and high-quality replacement of a water heater heating element at an affordable cost from trusted craftsmen, contact Master911 for services.
Departure around the city
Within 2-3 hours after submitting the application , our boiler repairman leaves for the specified address within the city.
Departure to the suburbs
If you need to make a trip to the suburbs (), the master can arrive on average in 4-5 hours.
Departure in the region
In all settlements of the region () we have proven masters, so in most cases the master arrives on the day of the call. By ordering a craftsman from us, you save time and transportation costs. Please note that during the season there is a very high workload, then the call may be transferred to the next day.
Attention! All services provided and parts replaced are warranted. Order services only from trusted masters!
Replacing the heating element of a water heater in St. Petersburg: price, call the master
- Neva-Service
- Replacing the heating element of the water heater
»
org/ListItem”> Repair of water heaters»
How much is it? | From 1500 rubles |
How long does it take? | 30-90 min. |
Is there a guarantee? | Yes, for work and a spare part according to the form BO-1 |
Often, the boiler heater fails due to natural wear and tear of the elements (frequent and prolonged use), poor water quality (a large amount of impurities and scale), use at the maximum heating temperature; a factory marriage cannot be ruled out. Also, sometimes parts burn out if the device is turned on in the absence of liquid (although usually modern models notify the user and automatically stop this process).
Introduction to the problem
There are only two “Symptoms” indicating a malfunction of the heating element:
- insufficient water heating (the actual temperature differs from the user-set one, moreover, the indicator on the panel indicates the presence of power),
- operation of the automatic protection or RCD when the boiler is turned on.
Regardless of the cause of the failure, the only way to fix the problem is to replace the damaged heating element with a new one. The purpose of this article is to explain the principle of dismantling and installing a heating element. We note right away that, ideally, this should be done by a competent specialist – a master who is familiar with the features of diagnosing and repairing such devices firsthand (the price for such services is low). Without having at least a basic understanding of the design features of the heating element, intervention (attempt to repair “with your own hands”) is fraught with aggravation of the situation.
How to replace the heating element: algorithm
First step: preparation
You also need to turn off the machine in the shield, and then proceed to drain the water. The latter can be implemented in several ways. The easiest method is through a check valve: you need to place a container under the valve or connect a hose, then open the valve and let the water drain. If the tank volume is 40 liters, it will take a little over an hour.
If you are the owner of a large volume electric heater, it is logical to use another method – to drain through the boiler inlet. To do this, you need:
- Close the inlet valve that supplies water.
- Unscrew the cold liquid supply hose.
- Remove valve.
- Unscrew the hose from the tank outlet.
- Open the boiler valve.
- Place container and wait a few minutes.
Second step: removal of the heating element
We note right away that the algorithm may vary slightly depending on the design features of the heater (they differ depending on the brand and model). However, the general sequence of operations remains as follows:
- You disconnect the hoses connected to the body. It is important to be careful here, as liquid may begin to pour out of them.
- Remove the housing from the hooks that secure it, and then place it on a flat horizontal surface.
- Remove the cover (it can be located and fixed in different ways: it is better to study the instructions).
- Remove the decorative washers from the nozzles (present in many models; for example, in heaters from Termex).
- Using a Phillips or slotted screwdriver, unscrew the screws or unfasten the latches.
- Disconnect thermostat wiring. Preliminarily, it is desirable to take a photo of the connection diagram; in extreme cases – a drawing. The general norms are as follows: green-yellow wire is grounding, brown-black is phase, blue is zero.
- By pulling the thermostat down, you can get it out of the housing.
- Before removing the heater, it is necessary to examine its retainers, as they can be different depending on the manufacturer.
In fact, the last point is the final one. Let’s develop it into a table, taking into account the features of boilers from different manufacturers:
Termex and Oasis |
Adjustable wrench required as a washer screwed onto six bolts acts as a retainer. |
---|---|
Elenberg, Polaris, Ariston |
Wrench No. 13 is required: you need to remove the gasket and pull out the element. |
Real |
It will be enough to use an adjustable wrench, with which you can unscrew the edges and get the part. |
Accordingly, in order to change the heating element (install a new one), you need to perform all these steps in reverse order.
Video: how to drain the water and replace the heating element
Diagnostics
Having dismantled the heating element, it is advisable to clean its structure from scale (if any), and then carefully examine it visually. The defect is not difficult to notice, since it usually expresses itself as a violation of the integrity of the coating. For example, if you see at least small cracks, chips or other damage, you can immediately throw out the heating element: repairs are impossible. If you do not see visible damage to the eye or want to make sure for sure, you can use the tester. Disconnect one of the terminals of the measuring device, run it over the surface of the heating element. If you see the exact resistance value, the element is damaged and the part can be thrown away. However, if the heating element is working, it is logical to suspect problems with the thermostat (which can also be checked with a tester), the failure of which can lead to similar “symptoms”.
Ways to extend the life of the heating element: final tips
As a conclusion, we will give a few recommendations, following which will increase the service life of the tubular heating element: will not allow lime to harden on the heating element.
Professional replacement of the heating element in St. Petersburg
In St. Petersburg, the replacement of heating elements of boilers is carried out by masters of Neva-Service. In 75% of cases, you will have hot water already on the day of the application.
1. Application
2. Telephone consultation with the master
3. The master arrives at home
4. Diagnostics
5. Repair
6. Warranty
Masters Neva
The experience of our employees will best say the experience of our employees about the quality of our work.
Grigory
13 years of experience
Ivan
13 years of experience
Andrey
12 years of experience
Artyom
12 years of experience0011
Experience 12 years
Evgeny
Experience 10 years
Gleb
10 years 10 years
Pavel
Maxim
900 years 7 years old
900 years 7 years experience 22 years
Ruslan
experience 12 years
Sergey
experience 11 years
Yuri
experience 10 years
0003
Cities
- Volosovo
- Vsevolozhsk
- Kolpino
- Kupchino
- Kronstadt
- Lomonosov
- Murino
- Pushkin
- Sestroretsk
- Strelna
Districts
- Admiralteisky
- Vasileostrovsky
- Vyborgsky
- Kalininsky
- Kirovsky
- Krasnogvardeisky
- Krasnoselsky
- Resort
- Moscow
- Nevsky
- Petrogradskiy
- Petrodvorets
- Primorsky
- Frunzensky
- Central
- Use the online call for a 5% discount
- Post a link to our website on social networks for 10%.
Technological Institute 1, 2
Specific
Dybenko street
Frunze
Black river
9038L
Direct call -5%
They ask us – we answer
How much does it cost to repair a water heater in St. Petersburg?
Our prices start from 500 rubles, the average cost of repairing a boiler without taking into account spare parts is 1500 rubles. You will know the exact cost BEFORE the repair, immediately after the diagnosis. Repair cost = Labor + Spare part. After sending the application, the master will call you – if you accurately describe the malfunction, he will name the estimated cost over the phone.
How to call a water heater repairman in St. Petersburg?
Call Neva-Service by phone or leave a request on the website. The nearest free master will contact you within 15 minutes, clarify the details of the malfunction and agree on the time of arrival.
Is it worth repairing old appliances or buying a new one right away?
In 95% of cases, the restoration of equipment will be more profitable than buying a new one, even a very cheap one. If, after the announcement of the cost, you consider the work unprofitable, it will be enough to pay for the diagnostics.
Can I be consulted by phone?
Yes. About 20% of cases require only a telephone consultation to solve the problem. First, fill out an application: this can be done on the website or by calling 8 (812) 385-66-80 or 8 (812) 245-31-20. After completing the application, the master will call you to clarify the details – you can get a free consultation from him.
How soon can the master arrive?
Your application will be forwarded to the nearest master to you. The master will call within 15-30 minutes and specify a convenient time for the visit. If you are on site and the master is free now, he can arrive in 15 minutes.
I am working, can I call the master after 18:00 or on weekends?
Yes, we are open from 9:00 to 21:00 every day, including Saturday and Sunday.
How can I get a discount?
Discounts are also provided to privileged categories of citizens and residents of besieged Leningrad. More.
Will I get a guarantee for the work performed?
Yes, you get a guarantee of up to 3 years for work and parts on letterhead in the form BO-1. Even if you lose your receipt, the warranty will still be valid.
Can I diagnose myself?
Yes, for a simple diagnosis, use the Wizard’s Tips for Washing Machines / Dishwashers / Dryers / Refrigerators section – in it we have analyzed typical breakdowns and how to fix them.
Can I fix the problem myself if the cause of the failure is identified?
For simple problems such as a clogged drain or inlet filter, this is the best solution. If the breakdown is serious or its cause is unknown, we recommend using the services of a professional – it will turn out cheaper than reanimating the equipment after an incorrect repair.
Why is an address required to apply?
Our craftsmen are distributed throughout the city. Address accurate to the house allows you to transfer your application to the nearest master and reduce the waiting time for repairs and transportation costs. If you wish, you can specify the nearest metro station instead of the address.
Can I bring the equipment to you?
Yes. Usually our masters work at home, but if you wish, you can bring the equipment to the workshop yourself. Call 8 (812) 385-66-80 for details.
Spare parts billed separately?
Yes, parts are charged separately from labor. The full cost will be announced immediately after the diagnosis.
Can I buy spare parts from you?
No, the parts are for use by our technicians only.
Can the technician install the part I bought?
Yes. In this case, the cost of work increases by 50% and we do not give a guarantee for the work performed, since we cannot guarantee the quality of the part you purchased.
What should I do if I am not satisfied with the cost of the repair?
The exact cost is announced by a specialist after the diagnosis. If it does not suit you, it will be enough to pay the cost of diagnostics 500 rubles. (1000 rubles, if diagnostics with analysis of equipment was required).
We regularly monitor market prices. Our prices are not above average, and the quality of work is the best in town.
How much will diagnostics cost if further repair is refused?
The cost of calling and diagnosing in such cases is 500 rubles, or 1000 rubles if disassembly of the equipment is required.
Do you repair under manufacturer’s warranty?
No. If your equipment is still under warranty (usually from 1 to 3 years), contact an authorized service center, whose contacts can be found on the manufacturer’s website – all work must be done by its employees free of charge. At your request, we can take up the work (for example, you need it urgently), but the manufacturer’s warranty will be lost.