Palm sander: The Best Palm Sanders of 2022

The Best Palm Sanders of 2022

BobVila.com and its partners may earn a commission if you purchase a product through one of our links.

Photo: Mark Clement

The finishing touches on a woodworking project can transform decent work into stunning craftsmanship. Using just the right sanding and finishing techniques can make all the difference. For this reason, some DIYers spend hours slowly sanding down wood projects by hand to achieve the perfect finish—a method that is time-consuming and tiring.

Whether the type of sander needed is a sheet sander or a random orbit sander, investing in the right kind of palm sander for your woodworking needs can help save both arm fatigue and time. Just attach a sandpaper to the bottom of a palm sander and the foot of the sander will vibrate rapidly in tiny orbits to efficiently sand down wood to a consistent finish, doing most of the work for the DIYer. Sanding can also open up the grain on a piece of wood so it accepts a finish coat more evenly.

Purchasing a high-quality palm sander is key to getting the woodworking results you want to achieve. We’ve researched and field-tested some of the most popular palm sanders on the market and narrowed the list to the following top-rated models in their individual categories.

1. BEST OVERALL: Makita BO5030K 5″ Random Orbit Sander
2. RUNNER-UP: DEWALT Random Orbit Sander, 5-Inch (DWE6421)
3. BEST BANG FOR THE BUCK: BLACK+DECKER Random Orbit Sander, 5-Inch (BDERO100)
4. BEST CORDLESS SHEET SANDER: DEWALT 20V MAX* XR Palm Sander, Sheet (DCW200B)
5. MOST COMFORTABLE: Bosch ROS20VSC Palm Sander
6. MOST UNIQUE DESIGN: WEN 6313 Electric 1/3 Sheet Sander
7. BEST ¼-SHEET SANDER: SKIL 7292-02 2.0 Amp 1/4 Sheet Palm Sander
8. BEST SHEET EXCHANGE: DEWALT Palm Sander, 1/4 Sheet (DWE6411K)

Photo: Mark Clement

Types of Sanders

While all sanders that can be held in the palm of one hand are often lumped into a single category—palm sanders—they are two different tools that do the same type of work. Both sander types move sandpaper in an orbital fashion, or swirl, but do so differently. They also take two different types of sandpaper and deliver a different output of power and stock removal. While both are useful tools, choosing the wrong type of sander for a woodworking project can lead to problems and prevent achieving the desired results.

Sheet Sanders

The first category is called palm sanders, or sheet sanders. They’re typically compact tools that require the user to cut sheet sandpaper into rectangles, which are then held on the tool with retainer springs. These units move the sandpaper in a repeating orbit to wear away the grooves that the sandpaper grit leaves on the surface. For serious work, a palm sander is followed by a final hand-sanding with the grain of the material. These sanders are best for unfinished wood.

Random-Orbit Sanders

A random-orbit sander also swirls its platten (the part the sandpaper goes on,) but in a much more eccentric and random orbit, creating fine swirl marks that are harder to see. They also retain their paper with “hook and loop” (Velcro) rather than wire clips. Their heads are circular and they tend to leave a better finish. They also cost more.

While both types of sanders are often pitted against removing finishes—say, paint from a piece of furniture—finish removal of anything much beyond a layer or two of a hard urethane is an uphill battle for these tools. It’s not because they don’t have enough power; it’s because friction between the sandpaper and the finish creates heat. The heat melts and liquefies the finish, and that rapidly gums up the grit of the paper. Hand scraping often works best for several layers of finish removal.

What to Consider When Choosing the Best Palm Sander

Selecting the right palm sander depends on the project. Some of the most important characteristics of these tools include whether they are corded or battery-powered, the orbits per minute, and the dust-collection features.

Corded vs. Battery-Powered

Most power tools now come with these two options for their models: corded and battery-powered. Depending on available space, a corded sander can be effective and efficient, never running out of power or slowing to lower orbits per minute (opm) than needed. For projects in a basement workshop, a garage, or a shed, corded sanders tend to be the best option. Simply pair them with an extension cord and they can be used in any workshop space that has electricity.

Battery-powered sanders eliminate the need to manage a cord, which can get in the way on a workbench or a work table. A cordless sander can be easily used when the project is outdoors and away from accessible outlets. While these sanders can have issues with maintaining a set opm level if their battery gets low, spare batteries can solve this issue when they are switched at regular intervals. Cordless sanders also win out in terms of maneuverability. There is no need to sidestep cords to avoid tripping over them while working.

Orbits Per Minute

The bases of both a random-orbit sander and sheet sander move in tiny orbits. The slower the speed of the orbit, the cooler the sander and sandpaper will remain. However, the sander will also be slower and less aggressive at removing material. Faster orbits per minute (opm) will finish a project quicker but can also result in high temperatures that can damage heat-sensitive materials.

The best option for optimal control for any project is a palm sander with a variable speed setting. This will allow use of the sander in fine applications that require a slow opm or in more broad applications that would benefit from a faster opm.

Pressure Detection

Newer models of the palm sander are beginning to use pressure detection features to help avid DIYers achieve the pristine finish they’re looking for. These pressure detection systems work by displaying a gauge on the side of the sander that indicates the amount of pressure being applied. If the pressure becomes too great, a sensor light or a vibration alerts the user to ease up the amount of pressure.

Dust Collection

Sanding is a messy job that’s necessary for those who want certain projects or repairs to look as perfect as possible. While each unit can be hitched up to a vacuum, where they will sand more efficiently, dust-capture containers on some units have come a long way.

Even more important than the final finish of a project is the user’s health. Wearing a dust mask while working can prevent inhaling any dust and wood fibers that are being kicked up into the air, but a built-in dust collector can help to quickly remove irritating or harmful particulates from a project before they can become airborne.

Additional Features

Many sanders come with additional features that can make a sanding job easier. Since sanding can be a lengthy job, and working with a bulky sander can be tiring even after just a few minutes, one of the best features to look for in a palm sander is optimal ergonomic design.

Some manufacturers focus on the professional applications of palm sanders and design their tools with added protection against impact. This prevents the tool from taking a single knock and breaking. For those who frequently drop their tools or regularly toss them into the back of a work truck, consider choosing a palm sander from a professional brand.

Some woodworkers, finish carpenters, or DIYers who make items in the workshop may need a more robust sander with a professional brand’s features to get the smoothness of operation that is helpful during long-duration high-detail projects.

Our Top Picks

While a sander’s primary function is to prepare a surface for a new finish, like removing the finish for a wood floor repair or even smoothing a hard-to-sand fast-setting joint compound on drywall, this collection of top picks includes both sheet sanders and random orbital sanders. Used in preparing bare wood for appearance and finish, the products below have been hands-on evaluated for stock removal, vibration, engagement with the project, and other important features. All these sanders left nice finishes and did their job for stock removal; the differences are in the details.

Photo: amazon.com

Check Latest Price

The Makita random orbit sander combines all the best features found in a tool in its category and is offered at a reasonable price. During our hands-on testing, we found that it has the power needed for stock removal, and it runs quietly and smoothly. The sander sends power and vibration into the work for stock removal without sending any back into the user.

The tool’s body is tall and slender, making the sander easy to use for long jobs, and it has a decent cord length. It ships with a blow mold kit box for easy storage in the shop or on the truck. The dust bag is a little better than average, and the dust containment works well, too.

Product Specs

• Speed: 12,000 opm
• Power: 3 amps
• Cord: Corded

Pros

• Smooth
• Powerful
• Quiet

Cons

• Better-than-average dust bag

Photo: amazon. com

Check Latest Price

The DeWalt random orbit sander delivers what’s needed from a sander. During our testing, we found that it has excellent stock removal and it leaves a nice finish. Its counterweight design reduces vibration for smooth operation, which is great for long jobs.

The sander has excellent engagement with the work, and it is easy to employ the switch. It’s a compact tool and has a small pommel, which may be an advantage to some users. The dust bag—held open by a spring—is much better than average and easy to dump out. The sander is simple and it works well. While it’s a little louder than other top picks, it’s hardly loud overall.

Product Specs

• Speed: 12,000 opm
• Power: 3 amps
• Cord: Corded

Pros

• Counterweight design reduces vibration
• Dust bag is easy to empty
• Small pommel
• Excellent engagement with work

Cons

• Louder than some others in its category

Photo: Amazon

Check Latest Price

The Black & Decker sander is ideal for occasional home-use jobs. The tool removes stock, runs smoothly enough, and won’t break the bank. Priced at less than half of some of the more pro-focused tools, we found that it also runs smoothly.

This sander’s switch is sealed and engages easily. It has a quality dust bag for a budget-friendly tool. It runs smoothly and despite having a lower rpm than others and no variable speed, we found that it can work on rough pieces, open the grain of a piece of stock to accept stain, or even sand a tough drywall repair.

Product Specs

• Speed: 12,000 opm
• Power: 2 amps
• Cord: Corded

Pros

• Great price
• Nice dust bag
• Leaves a smooth finish

Cons

• Low power

Photo: amazon.com

Check Latest Price

The variable-speed control of the DeWalt 20V Max XR Palm Sander allows the sander to be set as low as 8,000 opm for a fine finish or as high as 14,000 opm when extra power is needed. The cordless sander features a brushless motor that increases the life of the tool by decreasing the friction within the motor. The mobile design allows it to be used in the yard, in the workshop, or anywhere around the house without having to worry about dragging around an extension cord. The handy dust collector helps to keep a project clear of debris.

Cordless or not, we found that the DeWalt cordless sander’s paper exchange is the best among the sanders tested. The fact that it runs without a cord to move and that it runs smoothly and on par with its corded counterpart makes this a versatile sander. Add a nice switch and a variable speed dial and this unit could find a home doing more work than just sanding woodworking projects, including sanding fast-set joint compound in a drywall repair on low-speed or detail sanding a floor repair. Battery exchange is easy, and the sander is nicely balanced.

Product Specs

• Speed: 8,000 to 14,000 opm
• Power: 20 volts
• Cord: Cordless

Pros

• Cordless
• Variable speed
• Excellent paper exchange

Cons

• Costs more than corded tools

Photo: amazon. com

Check Latest Price

The Bosch random orbit sander delivered on all metrics during our hands-on testing. While it could be a bit grabby every now and again, it’s not enough of a reason to overlook its quiet, smooth, and comfortable operation. Most sanding is two-handed sanding, as one hand helps the other move the tool along the work, sanding out trouble spots. This tool’s larger pommel gives more surface area to fit two hands comfortably, making two-handed sanding the easiest of all of the sanders tested.

The variable speed dial on the rear of the handle enables customizing the opm to the work. The unit performs well across the board, from stock removal to fine finishing. It has a top-notch, easy-to-install-and-remove hard-plastic dust container.

Product Specs

• Speed: 7,500 and 12,000 opm
• Power: 2.5 amps
• Cord: Corded

Pros

• Most comfortable to use
• Variable speed
• Outstanding dust container design

Cons

• A little grabby when engaging the work from time to time

Photo: amazon. com

Check Latest Price

With a 1.2-amp motor that delivers up to 12,000 opm, the WEN Electric ⅓ Sheet Sander is powerful enough for tough projects despite weighing in at only 3 pounds. We found that the corded design and padded grip allow for long periods of comfortable working time without worrying about running out of power, while the integrated dust-collection bag minimizes sawdust and cuts down on cleanup time.

This dual-handled, ⅓ sheet tool is also fun to use. While it has a pommel like a typical palm sander and can be used as such, it also has a handle extension like a belt sander. The switch is super-easy to engage for “on” or ”off,” it runs reasonably smoothly, and is terrific for one- or two-handed operation. While it has easy-to-use stays for trapping ⅓ sheets of sandpaper, the pad is also hook and loop, making hook-and-loop paper an option. Overall, it delivered good stock removal, enough power, and comfortable operation.

Product Specs

• Speed: 12,000 opm
• Power: 1. 2 amps
• Cord: Corded

Pros

• Dual handles make for very comfortable operation
• Only peel-and-stick pad in our list of sheet sanders
• Biggest pad at ⅓ a sheet

Cons

• No hole punch for perforating paper

Photo: amazon.com

Check Latest Price

During our hands-on testing, the micro-filtration system captured dust particles while sanding, keeping the surface of the project clean. With up to 14,000 opm, the SKIL ¼ Sheet Palm Sander is powerful enough for tough projects, while the pressure-control system helps even the most inexperienced DIYer apply the correct amount of pressure for the job. The corded design and padded grip allow for long periods of comfortable working time without worrying about running out of power.

The tool doesn’t come with a punch to enable dust to pass (the user must punch the paper manually—not the end of the world) into its excellent dust container. Much better than a typical fabric bag, this hard, see-through plastic case with a filter enables the user to see when the case is full and doesn’t allow much dust to become airborne or spill as with typical bags. It has excellent stock removal and an easy-to-use switch.

Product Specs

• Speed: 14,000 opm
• Power: 2 amps
• Cord: Corded

Pros

• Excellent dust container
• Powerful
• Built-in vacuum adapter
• Included paper punch

Cons

• A little louder than the other palm sanders

Photo: amazon.com

Check Latest Price

For sites, shops, or jobs where sandpaper is changed out frequently, DeWalt’s system is far and away the best among those we tested. A simple release in front makes catching the paper super easy, trapping it in back with the wire holds quickly.

With top power for tough materials, the user can really lean on this tool for getting after difficult stock removal. The tool runs quietly, has a better than average dust bag, a built-in vac adapter for hooking directly to a vacuum without transition pieces, an included sheet punch, a great cord, and smooth operation. By design, the tool is compact for working in tight spaces.

Product Specs

• Speed: 14,000 opm
• Power: 2.3 amps
• Cord: Corded

Pros

• Best paper exchange
• Plenty of power
• Quiet and smooth operation
• Terrific dust bag

Cons

• Compact by design; some users may want a larger tool

Our Verdict

During our hands-on testing, all the tools performed well and left similar finishes in their own way. We found very few differences among all the tools that earned a spot on the top picks list. However, little differences add up fast during long sanding jobs, and with that in mind, small tool differences compound and stand out.

We found that the Makita BO5030K 5″ Random Orbit Sander does the best at all the things a sander needs to do. It is powerful, smooth, quiet, and engages the work heartily. It has a flexible cord and manageable switch. For long-haul sanding jobs, Makita’s sander gets it done. For those looking for a more powerful and compact tool, consider the DEWALT Random Orbit Sander. The corded random-orbit sander is smooth, maybe a little loud, but powerful and compact with a good cord and switch.

How We Tested the Best Palm Sanders

In order to get the widest array of uses in a single side-by-side sander test—everything from bulk stock removal to detailing a surface—we chose to see how the tools performed on a beat-up, weather-stained Hem-Fir 2×10 that had been outside for a few months.

As we wanted to re-create typical use for the sanders, each sander was used with three grits of sandpaper: rough (50-grit), medium (80-grit), and fine (120-grit).

• 50-grit sandpaper test: Evaluated stock removal and power in the mill marks and knots on the 2×10.
• 80-grit sandpaper test: Tested further stock removal and how each tool engaged with the piece of material.
• 120-grit sandpaper test: Determined how well each tool polished the material and opened the grain of the wood.

In addition to the performance of each tool, we evaluated the user’s experience. Cord length and flexibility, switches, paper exchange, smoothness, and comfort in use were also important criteria during our hands-on tests.

While sanding projects can look super smooth before finishing them, applying a finish can reveal swirl marks or blemishes the naked eye can’t pick up. We applied a finish to the wood to check that the sanded area was completely smooth before applying a finish to the main piece.

FAQs

Sanders are essential tools, even if they sit for long periods of time between uses. When sanding needs to be done, it needs to be done well. With two primary types of handheld sanders—random orbit and palm sheet sanders—figuring out which tool works best at which application can require some work.

Q. Is a palm sander or an orbital sander better?

A random orbit sander is regarded as being the better of the two tools. While the square pad on a palm sander may enable getting up close to something like an inside corner, random orbit sanders generally remove more stock. Plus, the randomness of their orbits are harder to detect in a finished piece and are less likely to telegraph through a finish.

Q. Is a sheet sander the same as a palm sander?

Yes, a sheet sander and a palm sander tend to be used interchangeably to describe the same tool that holds typical sandpaper to the tool with a wire clamp. It is unlike the hook-and-loop pads of random orbit sanders.

Q. What brand of palm sander is the most powerful?

All sanders are incredibly close as far as their capability for stock removal and finish. However, unscientifically, the SKIL 1/4 Sheet Palm Sander seemed to be the most aggressive at removing stock.

Random Orbital Sander vs. Palm Sander: What’s the Difference?

Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.

In the ongoing orbital sander vs. palm sander debate, the right answer for you depends on what projects you’ll use it for.

If you plan on doing any kind of carpentry or woodworking, you’ll need a power sander. These small and relatively low-cost machines let you sand down wood pieces quickly. They’re exponentially more efficient than a manual sanding block.

My career as a residential and commercial carpenter has given me hands-on experience with a wide range of random orbital and palm sanders — two tools that are more different than you might think.

On This Page

What is a Random Orbital Sander?

A random orbital sander is a handheld power sander that rapidly rotates in elliptical circles, as well as back and forth. This “random” motion results in a smoother finish, without the swirl pattern that can come from standard orbital sanders that only move in a circular motion.

Random orbital sanders are extremely efficient for large projects. Their round sandpaper pads create a uniform finish without any noticeable edges, although they can’t get into closed corners. These pads are also more expensive than the standard sheets palm sanders use.

I used random orbital sanders almost daily while refinishing desks and tabletops, and consider them one of the most important power tools for a woodworker. Some offer a variable speed setting, too, so you can customize the amount of sanding power.

Random orbital sander uses

• Smooth unfinished wall panels for painting.
• Sanding large, flat pieces of wood.
• Strip varnish or paint from furniture.
• Smoothing drywall mud.

What is a Palm Sander?

A palm sanders — AKA a 1/4-sheet sander because of the size of sandpaper it uses — is the smallest type of power sander. Their compact size makes them perfect for light-duty finish work, and their square pads fit into tight spots and corners that random orbital sanders cannot.

Palm sanders are also cheaper than random orbital sanders, and their sandpaper sheets much less expensive than the special hook-and-loop pads needed for random orbital sanders. Their smaller motors make them impractical for stripping thick layers of material, though, so they’re best for light-duty sanding projects.

Palm sander uses

• Finishing small woodworking pieces.
• Accessing inside corners.
• Sanding down small imperfections on wood.

How To Choose Between a Random Orbital Sander and a Palm Sander

First, think about the size of the projects. Larger pieces and panels that need to be sanded and stripped before they’re painted or stained are much better suited to the power and efficiency of a random orbital sander. Their stronger motors will finish the sanding quicker, making them much more efficient than palm sanders, which are better for precision tasks on smaller pieces.

Second, think about what you want to ultimately accomplish. If it’s an extremely smooth finish free of swirls or blemishes that would show through on your paint or stain, go with a random orbital sander. Just want to eliminate small imperfections on wood, especially on inside corners? Go with a palm sander.

If you’re unsure about the extent of the projects, we recommend a random orbital sander.

What Do Random Orbital Sanders and Palm Sanders Cost?

A high-quality random orbital sander costs about $75, while a palm sander runs about $60. Both can also be found for much less (around $30) if you lack the budget for a higher-quality option. In our experience, if you feel like splurging, Festool products are almost always worth the high price tag.

• Value random orbital sander: This compact Black+Decker Five-Inch Random Orbital Sander ($29) provides a comfortable grip for maximum control and a built-in dust collection bag for easy cleanup.
• Average priced random orbital sander: I’ve used the DeWalt Five-Inch Random Orbital Sander ($74) for years. Its powerful 3.0-amp motor and rubber grip makes it easy to breeze through projects quickly and comfortably.
• Splurge random orbital sander: Yes, it’s expensive. But I can tell you from hands-on experience this Festool Random Orbital Sander ($215) is worth every penny if you plan on doing a lot of sanding and need an extremely smooth finish.
• Value palm sander: The color-coded pressure indicator of this Skil Palm Sander ($28) lets you maintain precise control while you work, and its small size is convenient for storage and transport.
• Average priced palm sander: This DeWalt Palm Sander ($59) features heavy-duty clamps to keep your sandpaper in place. The locking dust port can be used with the included bag or a separate shop vacuum.
• Splurge palm sander: The extremely light weight, large dust extraction receptacle and specialized paper sheets make this Festool Palm Sander ($289) a great option for those with deep pockets.

Popular Videos

ⓘ

The 7 Best Random Orbital Sanders of 2022

By

Michelle Ullman

Michelle Ullman

Michelle Ullman is a home decor expert and product reviewer for home and garden products. She’s currently the commerce editor for home improvement and tools on The Spruce. She has been writing about home decor for over 10 years for publications like BobVila.com and Better Homes & Gardens, among others.

Learn more about The Spruce’s
Editorial Process

Updated on 08/08/22

Reviewed by

Deane Biermeier

Reviewed by
Deane Biermeier

Deane Biermeier is an expert contractor with nearly 30 years of experience in all types of home repair, maintenance, and remodeling. He is a certified lead carpenter and also holds a certification from the EPA. Deane is a member of The Spruce’s Home Improvement Review Board.

Learn more about The Spruce’s
Review Board

Fact checked by

Emily Estep

Fact checked by
Emily Estep

Emily Estep is a plant biologist and fact-checker focused on environmental sciences. She received a Bachelor of Arts in Journalism and a Master of Science in Plant Biology from Ohio University. Emily has been a proofreader and editor at a variety of online media outlets over the past decade.

Learn more about The Spruce’s
Editorial Process

We independently research, test, review, and recommend the best
products—learn more about
our process. If you buy something through our links, we may earn a commission.

The Spruce / Chloe Jeong

Whether you need it to sand old paint off a piece of furniture, smooth down a deck in preparation for a new coat of stain, or get kitchen cabinets ready to paint, a random orbital sander makes the admittedly tedious job of sanding easier, smoother, and more effective than merely scrubbing away with a piece of sandpaper. Says Eamon Lynch, Director of Warranty Service at Power Home Remodeling, “When it comes to carpentry or woodworking projects, having a random orbital sander in your toolbox is helpful for creating the smoothest finishes.”

Our favorite random orbital sander is the Bosch ROS20VSC Palm Sander, which our product tester put through its paces at his home, evaluating it for power, ease of use, effectiveness, durability, and overall performance.

Here are the best random orbital sanders for a variety of needs.

Our Top Picks

Best Overall:

BOSCH ROS20VSC Palm Sander at Amazon

Runner-Up Best Overall:

SKIL SR211601 5-Inch Random Orbital Sander at Amazon

Best Budget:

BLACK+DECKER 5-Inch Random Orbital Sander at Amazon

Best Cordless:

Makita XOB01Z Random Orbit Sander at Amazon

Best Heavy-Duty:

Ingersoll Rand 328B Heavy-Duty Air-Geared Orbital Sander at Amazon

Best for Big Jobs:

Makita BO5041K 5-Inch Random Orbital Sander at Amazon

Best Compact:

BLACK+DECKER BDERO600 5-Inch Random Orbital Sander at Amazon

In This Article

• Our Picks

• What to Look For

• Why Trust The Spruce

Courtesy of Amazon. com.

View On Amazon
View On Lowe’s
View On Acmetools.com

What We Like

What We Don’t Like

Who else recommends it? Popular Mechanics and BestReviews both picked BOSCH ROS20VSC Palm Sander.

What do buyers say? 93% of 3,500+ Amazon reviewers rated this product 4 stars or above.

Bosch 5-Inch Palm Random Orbit Sander Review

Sanding is dusty work, but with the Bosch ROS20VSC Palm Sander, you won’t have as much to contend with once the job is done. This small-but-powerful random orbital sander’s built-in microfilter system traps dust particles as small as one-half micron in diameter and has a twist-off dust canister that lets you see at a glance when it’s full. There’s also a vacuum-hose adapter in case you prefer to hook the device to your wet/dry shop vacuum.

But that’s not the only benefit of this handy tool. It has a 2.5-amp motor, which is plenty of power for most DIY tasks, and you can adjust the sanding speed between 7,500 and 12,000 orbits-per-minute to fine-tune the speed to your needs.

Our product tester used this sander to clean up three rough-cut bookshelves with heavy grain. He applauded the sander’s easy use, powerful performance, and effective filtration system, saying, “The Bosch Palm Random Orbit Sander stands shoulders above its competition in performance, dust control, and ease of use. Its lightweight, ergonomic design makes it easy to handle all sorts of work without fatigue, the sand discs are easy to swap in and out, and the pad dampening system eliminates swirl marks. “

The ergonomically shaped handle has a soft-grip top and is just long enough to allow you to grasp the sander in a variety of positions, greatly reducing strain on your hand and wrist. Plus, it weighs only 3.5 pounds and has an 8-foot cord, so you can stand comfortably while working.

The sander includes a sanding pad, sanding disc, vacuum adapter, and soft-sided carrying case. The warranty is one year.

Power Source: Corded | Motor: 2. 5 amps | Disc Size: 5 inches | Max. Orbits per Minute: 12,000 | Variable Speed: Yes

The Spruce / Nathan Borchelt

What Our Testers Say

“My shelf project also highlighted another one of the sander’s best features: its ergonomic, lightweight design. To control the sander, you grab onto one of the device’s soft-grip surfaces—either from the top, around the base under the power cord, or from the front of the device. The soft grip is not only comfortable, but it helps dampen the sander’s modest vibration.”—Nathan Borchelt, Product Tester

SKIL

View On Amazon

What We Like

• Variable speed

• Ergonomic grip

• Reasonable price

What We Don’t Like

If you’re looking for a great choice at a slightly lower price than the Bosch Palm Sander, you’ll love the SKIL SR211601 Random Orbital Sander. At 2.8 amps, its motor is slightly more powerful than the Bosch sander, and at a maximum of 13,000 orbits-per-minute, it’s a little faster, as well.

But while this sander has an easy-to-clean, highly effective dust collector, it can’t trap particles quite as small as the Bosch’s filtration system, and it lacks a vacuum-hose adapter that would allow you to hook the sander to your shop vacuum.

Still, with variable speed control that lets you sand as quickly or as slowly as necessary, a vibration-damping system to reduce stress on your hands and wrists, and a soft rubber grip and ergonomic design that’s comfortable to grasp even during lengthy sanding sessions, there’s a lot to love about this random orbital sander.

The SKIL sander takes 5-inch discs, weighs 3.4 pounds, and is compact enough to fit into fairly small spaces. It comes with a one-year warranty and three sanding discs. 

Power Source: Corded | Motor: 2.8 amps | Disc Size: 5 inches | Max. Orbits per Minute: 13,000 | Variable Speed: Yes

We Found the Best Cordless Drills for Home Projects

Courtesy of Amazon.com.

View On Amazon
View On Walmart
View On Lowe’s

What We Like

What We Don’t Like

If you’ll only need a random orbital sander for very light or infrequent household tasks, such as refurbishing an old piece of furniture, overspending doesn’t make a lot of sense. The best-selling BLACK+DECKER BDERO100 earns raves for doing a great job at a rock-bottom price. It’s not as powerful as many higher-priced sanders–the motor is just 2 amps–but that’s sufficient for a simple job like smoothing the top of a table before painting. Note, though, that the sanding speed is fixed at 12,000 orbits-per-minute, making this model a little less versatile than higher-priced choices with variable-speed control.

The BDERO100 features a dust-sealed switch to keep grime out of the tool, a Velcro-type system for holding the 5-inch discs in place, and an easy-to-grip rubberized handle. And at 3.2 pounds, it’s quite lightweight. However, it does not come with a vacuum hose adapter or carrying case. The sander is covered by a two-year warranty.

Power Source: Corded | Motor: 2 amps | Disc Size: 5 inches | Max. Orbits per Minute: 12,000 | Variable Speed: No

Courtesy of Amazon.com.

View On Amazon
View On Home Depot

What We Like

What We Don’t Like

Tired of being tethered to a power cord? While most random orbital sanders run off AC power from your home’s electrical system, you can stop worrying about staying close to an outlet with the Makita XOB01Z, which instead, runs off a rechargeable 18-volt lithium-ion battery. And if you’re worried about runtime, don’t be: You’ll get 20 minutes of power on high speed and 40 minutes on low–enough for all but the most intense sanding tasks.

The sander doesn’t lack for power, either. It has a three-speed motor that spins the 5-inch disc at 7,000, 9,500, or 11,000 orbits-per-minute. Note, however, that it isn’t variable speed; you can’t adjust the speed beyond the three settings.

There are other nice features as well, including one-touch electronic speed control, a dust-sealed switch, and an attached dust collection bag. And surprisingly, the battery doesn’t add too much weight– this sander weighs about 3.6 pounds, right in line with our top picks. Plus, it has an easy-on-your-hands ergonomic handle. However, note that this is the sander only; you’ll have to buy the battery and charger separately, unless you already own another 18-volt lithium-ion battery. The sander is backed by a one-year warranty.

Power Source: Battery | Motor: 18 volt | Disc Size: 5 inches | Max. Orbits per Minute: 11,000 | Variable Speed: No

Expert Buying Tip

“Sanders with built-in vacuums help keep your workspace clear of sawdust and other debris. “—Eamon Lynch, Director of Warranty Service at Power Home Remodeling.

Courtesy of Amazon.com.

View On Amazon
View On Grainger.com
View On Zoro.com

What We Like

• Very powerful

• Large pad

• Little vibration

What We Don’t Like

Most DIYers won’t require this much muscle from their sander, but if you plan on tackling tough jobs, such as sanding a big deck in poor condition, a boat hull, a load of lumber for fencing, or touching up an entire home’s worth of wooden floors, you’ll appreciate the air-powered Ingersoll Rand 328B Geared Orbital Sander. Built for heavy-duty tasks, this sander has a large 8-inch pad to get the job done fast.

Note that this sander runs off a large air compressor–preferably 80 gallon or more–not batteries or your home’s AC electrical system, and you’ll need to buy the air compressor separately if you don’t already own one. This Ingersoll Rand has a ¼-inch air inlet and accepts a minimum hose size of 3/8 inch. Average air consumption is 4 cubic feet per minute.

While very powerful, the sander is surprisingly easy on your hands and wrists, with low-vibration performance and an ergonomic design that’s easy to grasp even through long work sessions. It’s a heavy tool, however, at 4.7 pounds. And unlike most sanders, it lacks an integrated dust collection system, so this power tool is best used outdoors in an area that can handle some dust.

It’s backed by a one-year warranty.

Power Source: Air compressor | Motor: N/A | Disc Size: 8 inches | Max. Orbits per Minute: Not stated | Variable Speed: No

The 8 Best Pressure Washers of 2022 for Homes and Cars

Makita

View On Amazon
View On Home Depot
View On Toolbarn.com

What We Like

What We Don’t Like

When you’re tackling a lengthy job, such as sanding wooden floor edges, you’ll definitely appreciate the extra front handle on the Makita BO5041K 5-Inch Random Orbital Sander that makes it easy to use two hands instead of just one while working—that’s a lot less fatiguing—and gives you extra control when working in tight corners. Plus, this sander has rubberized grips and an ergonomic design to reduce user fatigue even further.

But don’t fear that you’re giving up on power or speed with this sander; it has a variable speed control dial with settings from 4,000 to 12,000 orbits-per-minute, a 3-amp motor, and a fairly large 1/8-inch orbit, allowing you to work quickly. Even better, the trigger switch has an easy-to-use lock, so no need to waste finger power keeping the power switch on while you work.

There’s a vacuum-port adapter if you prefer to let your shop-vac collect the dust, or you can rely on the tool’s built-in high-capacity dust collection bag.

The sander comes with a 5-inch sanding disc, case, and one-year warranty.

Power Source: Corded | Motor: 3 amps | Disc Size: 5 inches | Max. Orbits per Minute: 12,000 | Variable Speed: Yes

Amazon

View On Amazon
View On Home Depot

What We Like

What We Don’t Like

Sometimes, you just need a sander to do a small job, such as a furniture makeover, or to get into tight spaces. And for those times, the BLACK+DECKER BDERO600 5-Inch Random Orbital Sander is the power tool you need. At 8.8 x 5.1 x 6.3 inches, this tool is a little more compact than most others, making it well suited to tackling corners and edges, or for any quick sanding tasks. Plus, it only weighs a bit over 3 pounds, which is lighter than most other sanders on this list.

But just because it’s small doesn’t mean it’s a weakling. The 2.4-amp motor has enough oomph for lightweight jobs, and with a fixed speed of 14,000 orbits-per-minute, it gets the job done just as quickly as many higher-end sanders.

The comfortable, rubberized grip is easy on your hands, and the high-performance dust collection bag keeps your work area clean, although, as with any sanding device, you need to wear a suitable dust-protection mask while working.

The sander is covered by a two-year warranty. 

Power Source: Corded | Motor: 2.4 amps | Disc Size: 5 inches | Max. Orbits per Minute: 14,000 | Variable Speed: No

Expert Buying Tip

“If you don’t have a lot of space to work with, think about opting for a random orbital palm sander. Palm sanders are small enough for tight spaces and easy to use; simply strap on a new piece of sandpaper and you’re ready to go.”—Eamon Lynch, Director of Warranty Service at Power Home Remodeling.

Final Verdict

If you’re looking for a random orbital sander, it’s hard to go wrong with our top pick, the Bosch ROS20VSC Palm Sander. It’s loaded with great features, has lots of power, is easy on your hands, and has one of the most effective filtration systems for these types of tools. But if you just want a sander for occasional or lightweight use, such as sanding down old furniture in preparation for a new paint job, you’ll appreciate the performance and the price of the BLACK+DECKER BDERO100 (view at Amazon).

Power Source

Random orbital sanders can be powered in a few different ways. Some devices must be plugged into an electrical outlet, meaning you may need an extension cord if you’re planning to work outside. Other units are cordless and run on rechargeable batteries. While battery-powered sanders are infinitely more portable, they have a limited run time. Lastly, some orbital sanders are powered by air compressors, making them a handy option if you already have a compressor in your workshop.

Dust Collection

You’ll likely kick up a lot of sawdust while sanding, which is why many people prefer a random orbital sander with a built-in dust collector. This feature sucks sawdust into an attached bag or canister that you need to empty periodically. Some higher-end sanders also have a vacuum attachment that allows you to hook the tool to your shop vac. Either way, however, you need to wear a protective dust mask and eye protection while you work to avoid injury to your eyes and respiratory system.

Disc Size

Random orbital sanders use round sandpaper discs that come in various sizes, most commonly either 5 inches or 6 inches in diameter, although heavy-duty sanders can take discs as large as 8 inches across. Note that you can’t simply swap disc sizes; sanders are designed to hold one specific disc size only. If you’re looking to tackle large jobs, you’re probably better off with sander that uses larger discs, as this will help you sand large areas faster. On the other hand, smaller disc sizes give you a little more control and fit into tighter spots.

FAQ

• Typically, random orbital sanders are used for moderate sanding needs on flat surfaces, such as removing paint or other finishes, smoothing down rough edges on furniture or other items, sanding away rust, smoothing small areas of patched drywall, preparing wood for painting, and similar tasks around the home, garage, or worksite. The beauty of a random orbital sander, thanks to its irregular movements, is that it won’t mar or scratch woodgrain, so you don’t have to be as mindful of the grain while you work.  

  When tackling the toughest sanding jobs, such as smoothing very rough wood or removing multiple layers of paint, a belt sander will get the job done faster. And if you need to sand a delicate surface, a sheet sander is the appropriate tool. Still, for the majority of sanding tasks the typical DIYer is likely to face, a random orbital sander will get the job done quickly, efficiently, and effectively.

• While the major difference between a random orbital sander and an orbital sander may seem slight, it’s important. On a random orbital sander, the sandpaper disk spins in a circle while the pad holding the disk is also moving in a slightly oval pattern, creating a “random” spin that won’t move the sandpaper in an exact path over the material being sanded—that’s why these tools don’t mar or scratch wood grain. By contrast, an orbital sander also has a spinning sandpaper disk, but lacks the additional oval rotation, meaning you’ll need to be much more mindful of wood grain while you work.  

  A sheet sander, also called a palm sander, has a similar appearance to the typical random orbital sander, but instead of a round sandpaper disk, it has a rectangular piece of sandpaper that moves in a back-and-forth motion, rather than a spin. Sheet sanders are useful for detailed work, or when sanding along edges of materials. Be aware that sometimes random orbital sanders and orbital sanders are also sold under the term “palm sander,” as the most common form of all of these tools is as a fairly small device that’s shaped for easy grasp in the palm of the user’s hand, although there are also random orbital sanders that are large enough to require the use of both hands to control the tool while working.

  A fourth common type of sander is a belt sander, which differs from both types of orbital sanders in that instead of a vibrating sandpaper disk, you have a loop of sandpaper that’s spinning between two rotating drums. Belt sanders are very efficient for fast, rough sanding, but lack the finesse that’s possible with a random orbital sander.

• While most people will use their random orbital sander on wood—removing paint, smoothing down rough edges, or preparing the surface for paint—you aren’t limited to wood. With the appropriate sandpaper in place, you can also use your tool to buff or sand metal, remove rust from metal surfaces, smooth down plastic, and buff, smooth, or sand composite materials such as countertops. You can even use the sander on plaster or drywall to buff away rough edges after patching or before painting. It’s truly a versatile tool.

This article is edited and updated by Michelle Ullman, the tool expert for The Spruce. She has extensive experience not only in writing about all things related to the home, but also in carrying out various DIY projects, including landscaping, painting, flooring, wallpapering, furniture makeovers, and simple repairs. For this roundup, she considered dozens of random orbital sanders, evaluating each for basic features, extras, and customer feedback, as well as product tester input.

Eamon Lynch, Director of Warranty Service at Power Home Remodeling provided further tips and advice on choosing and using a random orbital sander.

Article Sources

The Spruce uses only high-quality sources, including peer-reviewed studies, to support the facts within our articles. Read our editorial process to learn more about how we fact-check and keep our content accurate, reliable, and trustworthy.

1. The Best Orbital Power Sanders, Cordless and Corded. Popular Mechanics. https://www.popularmechanics.com/home/tools/g26626730/power-sanders/

2. BEST RANDOM ORBITAL SANDERS. BestReviews. https://bestreviews.com/tools/sanders/best-orbit-sanders

Best Orbital Power Sanders 2022

Gear-obsessed editors choose every product we review. We may earn commission if you buy from a link.
How we test gear.

These tools let you quickly strip weathered exterior paint, remove a finish, smooth a tabletop, and do basic metal prep.

By
Roy Berendsohn

Mar 7, 2022

Trevor Raab

An orbital sander is an indispensable power tool. You can use it to strip paint or sand the gloss off a painted surface so that a new coat sticks more readily to it. Plus it will strip rust, clean up flea market furniture, remove a splintered edge from a piece of wood, and take the burr off a piece of freshly cut metal. Of course, one of the jobs it excels at is smoothing wood to prepare it for a clear finish. Knowing how useful this tool is, we gathered a range of both cordless and corded orbital power sanders and tested them in an effort to help you find the right one. Read on for buying advice, our reviews of the best, and tips on using and maintaining your sander.

The Best Power Sanders

• Best Corded: Bosch ROS20VSC Random Orbital
• Most Versatile: DeWalt DWE6421 Random Orbital
• Best Cordless: DeWalt DCW210D1 Random Orbital
• Best Value: Ryobi P411 Orbital
• Smoothest: Milwaukee 6034-21 Random Orbital
• Ideal for Craftsman Fans: Craftsman CMEW231 Random Orbital
• Almost Pro-Quality: Ryobi RS290G Random Orbital
• Aggressive and Effective: Makita XOB01T Random Orbital
• Good All-Around Cordless: Ridgid R8606B Random Orbital
• Best for Wide Surfaces: Milwaukee 2648-20 Orbital
• Best at Sanding into Corners: Metabo-HPT SV12SG Orbital
• Lightweight: Black & Decker BDCRO20C Orbital
• Best on a Ladder: Porter-Cable PCCW205B Random Orbital

Know Your Sander

Most of our test sanders are random-orbit types with a round pad measuring 5 or 6 inches across. Random orbit means the pad spins and oscillates in, just that, a random orbital motion. This reduces the chances of leaving swirl marks on the surface and allows you to move the sander both with and across the grain. We also tested an orbital sander with a square pad (also called a quarter-sheet sander). These tools sand with a consistent orbital motion and work more slowly than random-orbit types. But the square pad allows them to sand into corners.

Another difference between these is that the random-orbit variety take sandpaper discs that attach to their bases with hooks and loops. Orbital sanders use peel-and-stick sandpaper that comes precut or that you cut to fit, or you attach an abrasive sheet to the tool with the clamps on the sander’s sides. Both types of sanders have a bag that will capture most of the dust the tool produces. For more thorough dust control, use a sander that has a round exhaust port to facilitate hooking up to a hose on a shop vacuum.

Battery-Powered Versus Corded

We evaluated both battery-powered sanders (called cordless) and corded models. At the outset of the test, we wondered if the battery would cause a cordless sander to be too heavy. But when we weighed the two types of tools, we found they weigh about the same, once you factor in the cord’s heft. Select a cordless sander if you spend a lot of time on job sites and already have lots of cordless tool work going on. Cordless tools are handy and more mobile when you’re climbing a ladder or a scaffold because you don’t have to contend with the weight of a cord hanging down.

Select a corded tool if you spend long sanding sessions at a bench, especially if you can plug the sander directly into an outlet without an extension cord. In these cases, cord drag isn’t an issue and there isn’t a pressing need for mobility. A good example of this is when you sand a piece of furniture. You just need to work your way down through each grit, slowly perfecting the sanded surface.

How We Test

To put these tools through the paces, we drew rectangles on pieces of oak and maple, plywood, and softwood and sanded each rectangle with an 80-grit disc. Next, we emptied the dust container or bag to check the volume of dust the sander collected. We also carefully wiped down the work surface to get a sense of how much dust the sander missed. As we worked, we assessed the sander’s vibration and whether it produced an unpleasant gyroscopic effect when we lifted it off the test board. We examined the sanded surface under bright light to see whether the tools left swirl marks.

Any of the sanders in this test will serve a homeowner. Professional-grade models such as the sanders from Makita, DeWalt, Bosch, and Metabo-HPT vibrate less and are more durable. For homeowner-duty power tools that give nearly a professional level of performance, see the reviews of the Ryobi sanders and the Craftsman. Also note that a less expensive tool equipped with a high-quality abrasive sheet will prove more than adequate for most uses around the house.

---

Supply chain problems are causing some of our sanders to come and go out of stock pretty rapidly. However, there are other options that we can recommend. We haven’t tested these three sanders, but they’re in stock, and similar models to these have performed well in our past tests.

• Skil SR211601
• Bosch GEX34-6N
• DeWalt DWE6411
  

BEST CORDED

Bosch

Bosch ROS20VSC Random Orbital Sander

Most Versatile

DeWalt

DeWalt DWE6421 Random Orbital Sander

BEST CORDLESS

DeWalt

DeWalt DCW210D1 Random Orbital Sander

BEST VALUE

Ryobi

Ryobi P411 Orbital Sander

$65 AT AMAZON

Smoothest

Milwaukee

Milwaukee 6034-21 Random Orbital Sander

Ideal for Craftsman Fans

Craftsman

Craftsman CMEW231 Random Orbital Sander

ALMOST PRO-QUALITY

Ryobi

Ryobi RS290G Random Orbital Sander

AGGRESSIVE & EFFECTIVE

Makita

Makita XOB01T Random Orbital Sander

$344 AT AMAZON

Good All-Around Cordless

Ridgid

Ridgid R8606B Random Orbital Sander

BEST FOR WIDE SURFACES

Milwaukee

Milwaukee 2648-20 Orbital Sander

Best at Sanding Into Corners

Metabo-HPT

Metabo-HPT SV12SG Orbital Sander

Lightweight

Black & Decker

Black & Decker BDCRO20C Orbital Sander

Best ON A LADDER

Porter-Cable

Porter-Cable PCCW205B Random Orbital Sander

MAINTAINING YOUR SANDER AND YOURSELF

Sanders don’t need a lot of care, but they do need some. The best thing you can do for it is to blow the dust out of it using compressed air (or a can of compressed air purchased at an office supply store) or use a shop vacuum and work over its exterior, especially its air vents.

Now protect yourself, especially your lungs: Wear a dust mask when sanding. Better models have a foam strip to help the mask make a better seal to your face. They may also have a vent that reduces moisture buildup under the mask.

Clean up as you work to prevent large piles of talc-like dust from accumulating. And when you’re done sanding and ready to take a break, either brush or vacuum yourself off before going inside the house or other clean area. It’s also a good idea to wear an old shirt, coveralls, or a shop apron and leave that in the sanding area, rather than bringing dust into the house. Having a floor mat outside the shop is great, too. Remember what your mom said: Wipe your feet (or take your work shoes off)! This cuts down on tracked dirt, which is more than just a nuisance. Remnants of sanding grit on shoe soles can scratch finished floors, and tracked-in dust can form an eye-watering or throat-scratching irritant as it spreads throughout the house.

When it comes to using a sander, it’s pretty simple, and there are only these key rules:

1. Move the sander slowly and steadily over the work surface. Racing back and forth is hard on the tool and whatever you’re sanding.
2. Don’t skip more than one grade of grit as you move from coarse to smooth. You can go from 100 grit to 150 (skipping 120), but don’t go from 100 grit to 220 grit. It doesn’t hurt to move through each size of grit, from coarse to smoothest, but for all but the finest of work, it’s not necessary.
3. Vacuum the surface clean with a shop vacuum and a brush attachment when you’re done with each level of grit. This removes any trapped particles hiding on the surface. For furniture-grade finishing, wipe the surface clean with a tack cloth (a sticky piece of cloth used to pick up dust; it’s sold in the paint aisle) before proceeding to the next grit.
4. Don’t tip the sander near the edges because it will round them off. Of course, if you prefer a slightly rounded corner, that can be a good thing. For example, paint sticks better to a gently rounded corner than to a sharp one.

Roy Berendsohn
Senior Home Editor
Roy Berendsohn has worked for more than 25 years at Popular Mechanics, where he has written on carpentry, masonry, painting, plumbing, electrical, woodworking, blacksmithing, welding, lawn care, chainsaw use, and outdoor power equipment.

Orbital Sander vs Palm Sander

The main difference between an orbital sander and a palm sander is that palm sanders are ideal for detail-sanding. The differences are subtle, but a palm sander is small enough to be held int he palm of your hand and as such, is far more maneuverable than a typical orbital sander.

SaleBestseller No. 1

DEWALT Random Orbit Sander, Variable Speed,. ..

• 3.0-amp motor of the orbital sander spins the…
• Separate counterweight design of the hand…

SaleBestseller No. 2

BLACK+DECKER Random Orbit Sander, 5-Inch…

• HIGH PERFORMANCE ORBIT SANDER – 2.0 Amp…
• HIGH EFFICIENCY – Delivers 12000 OPM (orbits…

Whether you are renovating the kitchen or handing out Christmas presents to the kids; you probably need to use a sander for something. Concerning some minor details, it is enough to produce grinding blocks and sanding paper of the correct size and pull a few grips by hand. On the other hand, larger woodworking projects with bigger areas to be sanded or where roughnesses are to be smoothed, usually more fun and faster with a sanding machine.

Sanding is something we do to get a smooth wood surface in our finished product. And a sander is a power tool used to polish surfaces by scraping with sandpaper. Whether the surface is painted, varnished, or otherwise treated, it should always be sanded first. You should always refer to a sandpaper grit chart in order to select the correct sandpaper for the job; doing so will speed up the work and save effort. There are different types of sanders, like palm sanders, belt sanders, disc sander, Drum sander, Oscillating Spindle Sander, orbital sanders, etc. In today’s blog, we are going to talk about orbital sander vs. palm sander and provide you with all the necessary details you need to know about them.

SaleBestseller No. 1

DEWALT Random Orbit Sander, Variable Speed,…

• 3.0-amp motor of the orbital sander spins the…
• Separate counterweight design of the hand…

SaleBestseller No. 2

BLACK+DECKER Random Orbit Sander, 5-Inch. ..

• HIGH PERFORMANCE ORBIT SANDER – 2.0 Amp…
• HIGH EFFICIENCY – Delivers 12000 OPM (orbits…

SaleBestseller No. 3

DEWALT Random Orbit Sander, 5-Inch (DWE6421K)

• 3.0-amp motor of the orbital sander spins the…
• Shorter height of the hand sander allows the…

What is a palm sander?

It is a pretty easy guess. You can know that palm sander as the name says, get their name because they usually fit into the palm of your hand.

What is an orbital sander?

An orbital sander is a sander that is square and is more substantial than a palm sander. It is easy to manage and best for reaching into tight corners, including flat edges.

What is the difference between the orbital sander and palm sander?

Bestseller No. 1

BLACK+DECKER 20V MAX* Random Orbital Sander,. ..

• FAST MATERIAL REMOVAL – At 12,000 opm…
• COMPACT, EASY-TO-MANEUVER DESIGN – Compact…

SaleBestseller No. 2

DEWALT 20V MAX Orbital Sander, Tool Only…

• Orbital sander with brushless motor provides…
• Variable-speed control of the hand sander…

SaleBestseller No. 3

DEWALT 20V MAX* Random Orbit Sander, 5-Inch,…

• Orbital sander with brushless motor provides…
• Variable-speed control of the hand sander…

Before going into detail about orbital and palm sander, let’s talk about some of the main differences between them.

• Orbital sanders are square in shape while palm sanders are rectangular.
• As compared to a palm sander, orbital sanders are more massive tools, which means that palm sanders are smaller and more lightweight.
• The motions of orbitals are Circular and orbiting, and palm sanders only have orbiting motion.
• If you want to work with larger pieces, orbital sanders are better than palm sander. But if you’re going to work with smaller pieces, palm sanders are most suitable.
• If you want to do the bigger sanding jobs much more promptly, then you should consider orbitals, but if you want a smoother result, what can be better than a palm sander? Only a palm sander.

Often people get confused about an orbital sander and random orbital sander. So before we make a further comparison of orbital sander vs. palm sander, it is useful to know about these two sanders.

What is a random orbital sander?

These sanders are quite different then orbital sanders. While orbital sanders have a square pad but random orbital sanders have a round pad. You may think that’s not a big difference, but it is as the circular sanding pad allows it to move differently compared to orbital sanders.

The best thing about random orbital sander is that it does not leave any sanding marks after you use it, and also it comes with varying speeds. But unlike orbitals, it can’t go into deeper places or edges effortlessly.

Now let’s get on details on orbital sanders and palm sanders.

More about palm sanders

A palm sander is a great finishing tool for any woodworking project. You could use innumerable materials depending on the type of sandpaper that you choose. These are meant for fine sanding to work on materials that you want to get a subtle finish.

The pins in palm sanders allow you to take a quarter sheet of regular sandpaper that you would cut with a pair of scissors or utility knife. And out of a single sheet of sandpaper, you could get four pieces on a palm sander. Essentially it vibrates and oscillates in your hand and just kind of moves back and forth. The orbit Sanders is many people’s favorites. It doesn’t do a great job of collecting the dust, but it will help eliminate dust.

There are different kinds of hooks that you can use for palm sanders. You want to make sure that the holes line up with some of the holes inside of it to help with the dust collection.

When using a palm sander, you need to avoid putting too much pressure because if you put a lot of pressure on top of the tool, that kind of spinning motion will be eliminated, and you won’t get the better performance out of the sandpaper. So allow the tool’s weight and a little bit on your hand to work back and forth. So if you’re doing any kind of fine sanding- when it comes to woodworking, one of the small palms Sanders is the way to go.

Bestseller No. 1

5-Inch 8-Hole Hook and Loop Sanding Discs…

• MEETS ALL YOUR NEEDS – Including 10pcs of…
• HOOK & LOOP – Easy installation and removal,…

Bestseller No. 2

WORKPRO 150-piece Sanding Discs Set – 5-Inch…

• ✅ 150-Piece multi-grit sandpaper set – Our…
• ✅ High-quality construction – Our sanding…

When choosing a palm sander, you can choose what is comfortable for you. I would recommend the sander that has a dust collection. Operating a palm sander is very simple. You need to turn it on and start sanding.

My palm sander doesn’t last long enough. I’m burning out my pads. I’m wearing off the hook and loop system. what is the reason?

This is a question many people ask when using palm sanders, and it’s because you are putting too much pressure on the sander. You don’t want to be bearing down. You should hold it in place and let the sander do its work.

Note: Palm sanders take plenty of sandpaper, and it is not suitable for working with larger pieces of wood.

More about orbital sanders

Now let’s talk about the orbital sander, which will include some basic sanding techniques. There are two types of orbital sanders on the market today. The first one is the standard orbital sander, usually classified by the size of the sanding pad and its shape, which is generally a square or rectangle. There are at least a few subcategories to the standard orbital sander. The first is the quarter sheet orbital sander, which can hold a quarter sheet of nine by eleven standard-sized sandpaper. This gives the user the ability to get four usable pieces out of one sheet.

The next category is the half sheet orbital sander. This holds a half sheet of sandpaper and provides two usable pieces out of one sheet. The sheets are usually attached to the sander with some spring system or metal clamp that holds the paper to the sanding pad. Almost all orbital sanders move the sanding pad in the same way, which is in a very tight orbital motion. It helps to remove material faster.

One of the biggest downsides to the sanders is their inability to remove a lot of material quickly. But fortunately, there’s another option, and in comes the random orbital sander. This sander is characterized by a round sanding pad with round sanding discs that can be attached to the pad with either a pressure-sensitive adhesive or a hook and loop kind of like velcro. The round sanding discs have factory holes that line up with the onboard dust collection to reduce dust while sanding.

It’s important to remember that while you’re working with a standard orbital sander, you always sand in the grain direction. If you’re not cautious, this sander will leave some really bad cross-grain scratches.

Should I choose a palm sander or orbital sander?

It entirely depends on your usability. You can go with a palm sander if you need a tool to sand a finished work or have finished assembling a part of small furniture that you don’t intend to paint. But if you want to sand a large surface, go with the orbital sander. Also, an orbital sander is useful to remove paint and varnish from surfaces. But if you are tighter in budget palm sander is something you should consider.

Is palm sander more expensive than orbital sander?

No, a palm sander is not more expensive than an orbital sander. Due to the wide range of usabilities, such as lower grit, higher power, and other facilities, including proper warranties, an orbital sander is more costly than a palm sander. You can find a good palm sander on a budget of $50 and an orbital sander on a budget of around $100.

Do you recommend using a palm sander on drywall?

Even though you can use a palm sander on drywall, I strongly suggest using an orbital sander as it is much more suited for drywall considering its quickness.

In conclusion, there are more pros and cons to each of these sanders, but overall I have to say that the orbital sander is a great beginner tool regardless of what you buy. All new Sanders come with some dust collection bags. But remember that when you’re using sheets of standard sandpaper, you have to punch holes in the papers so that the dust collection system can draw the sawdust.

The last thing I want to mention is about dust collection; that it’s always better to use a hose and a vac system than using the factory bag. These bags are great for small amounts of sanding, but I would strongly consider using a vac if you have to do a lot of sanding.

Tags: difference between palm and orbit sanders, orbital sander vs palm sander, orbital vs palm sander, palm sander vs orbital sander, random orbital sander vs palm sander

Categorised in: DIY Guides, Orbital Sanders, Palm Sanders, Power Sanders

How To Choose The Best Palm Sander For Your Woodworking Projects

By Stefan Gheorghe | Published on Mar 2, 2022 Reviewed by Lance Crayon

Buy Now

You should know how to choose the best palm sander for your woodworking projects. If not, we’re here to help. Whether you’re a woodworking professional or a DIY enthusiast, a palm sander is a must. Even if you’re a hobbyist, it’s important to know which palm sander is right for you.

Palm sanders are inexpensive tools designed to handle a variety of woodworking jobs. From refinishing furniture to touching up paint jobs, a palm sander can help you achieve your goals.

If you’ve never bought a palm sander, you might find yourself overwhelmed as there are many models available on the market.

Before we get started, let’s identify the most common types of sanders.

What Is A Palm Sander?

A palm sander is a perfect tool for detail sanding. The tool is small enough to fit in the palm of your hand. Its small size makes it easy to operate.

Difference Between An Orbital Sander and Random Orbital Sander?

View in gallery

It’s easy to get a random orbit sander and orbital sander confused. After all, their names are almost identical. However, the tools are different.

Orbital Sander

Orbital sanders are bigger than palm sanders and use a square pad. The tool works in a circular motion, making them more versatile. The sanders are ideal for bigger sanding jobs. Also, orbital sanders are unique in that they use square pads.

Random Orbital Sanders

A random orbital sander uses a round pad, unlike an orbital sander. The best thing about a random orbit sander is that it does not leave any sanding marks. It also has adjustable speeds. And unlike orbital sanders, it can’t reach deeper places or edges with ease.

However, a random orbit sander is the best tool for sanding projects and different jobs like stripping paint off furniture, preparing new molding, or cleaning up between finish coats. The tool is also good for smooth and clean metal and composite materials like solid surface countertops.

If you go with a random orbit sander or other type of sander, make sure it has built-in dust control. Cordless sanders are also available, and they don’t come with an extension cord.

What To Consider When Buying A Palm Sander

There are a couple of factors you need to take into consideration when purchasing your palm sander. 

Comfort

Sanding projects require time, so the last thing you want is to be holding an uncomfortable palm sander. Some features that you’d want to look for in your palm sander for added comfort include a padded grip, an ergonomically-shaped handle and a design that reduces vibration. 

Related: 5 Best Circular Saws Money Can Buy

Durability

Since you’ll be using palm sanders to sand down wood or other items, it’ll have constant high-intensity contact. You should purchase a palm sander that’s durable and able to last for a considerable amount of time.

Take the time to read through reviews as customers will have pointed out whether or not the palm sander that they’ve purchased is well-built.  

Orbits Per Minute

This can determine the type of surface that your palm sander is suited for. Harder woods will require more power and will thus need a sander with more orbits per minute. Ideally, you should go for a sander that has higher capabilities as it’s always better to have it just in case. 

Dust Collection

This is another factor to consider, and it’s one of the most vital aspects of any woodworking tool. With dust, you may not get the smooth, refined results that you’re looking for, and it’s also detrimental to your health.

Most palm sanders will come with a dust port and even a collection pouch that’ll help take care of all the dust. Even if you won’t be using your palm sander often, a dust port’s a must – also remember to wear gloves and goggles while you’re sanding. 

Power Source

Think about whether you’d like to go for a corded or battery palm sander. While battery-powered palm sanders are convenient, they won’t run long as the battery will die. When that happens, you’ll have to take a break from your project and recharge your palm sander – costing you time.

Replacing the batteries of your palm sander can also be costly. On the other hand, corded palm sanders can run for the entirety of your project with no issues at all; the only problem is that maneuvering your palm sander can be difficult, especially if you’re working outside.

Either way, both corded and battery alternatives come with their pros and cons, and you should select the one that best suits your needs.

Extras

Palm sanders can also come with a pressure detector that’ll let you know if you’re pressing too hard. When selecting your sander, this is a feature you should get if you’re new to sanding.

If you’re not careful with a sander, you can end up causing damage to the piece that you’re working on, safety features such as pressure detection can help minimize the risk of you ruining your project. 

Seal

Finally, the last thing you’d need to consider is the dust seal. The last thing you’d want is for the dust to start flying everywhere. Not only is it bad for your health, but it can also affect the tool that you’re using.

A palm sander with a dust seal design will help keep dust out of sensitive parts of the tool so that it’ll last longer. It’s good to go for a palm sander that has this feature as it’ll ensure that your tool lasts for longer. 

1.  

Top Palm Sanders

1. DEWALT 20V MAX XR Palm Sander

View in gallery
This highly-rated palm sander is what you need for your home DIY project. It comes with a brushless motor that’ll efficiently get the job done, and it also has variable speed control from 8,000 – 14,000 OPM.

As it’s got a low-profile height, you can get close to the work surface for sanding that’s more precise. There’s also a paper clamp to securely hold the sandpaper, along with a dust-sealed switch that’ll help with extending the life and usability of your palm sander

Pros: 

• Brushless motor 
• Variable speed control
• Low profile height
• Dust-sealed switch
• Paper clamp 

Cons: 

• A little heavy to hold

2.

SKIL Sheet Palm Sander with Pressure Control

View in gallery

Another great palm sander, this particular model is easy to use and even comes with a unique micro-filtration feature to capture and contain fine dust particles. It’s also great for beginners since it comes with pressure control technology that’ll let you know if excessive pressure is used.

The built-in vacuum adapter can help with collecting dust, and this particular product is corded with a voltage of 120 volts. 

Pros: 

• Easy to use 
• Special micro-filtration feature 
• Pressure control technology 
• Built-in vacuum to collect dust 

Cons: 

• Issues attaching the sandpaper

3. BLACK+DECKER Electric Sander

View in gallery

This orbit sander comes with numerous features that make it stand out. It has tri-layer filtration and provides a 270-degree flush sanding clearance.

It also has a soft grip so you can comfortably hold your palm sander for an extended period of time. It also has a paddle switch activation so you can easily switch it on and off, and also comes with a high-performance dust collection feature. 

It runs at 1,600 orbits per minute, is compact, and is a great tool to have for precision.

Pros: 

• Tri-layer filtration
• 270-degree flush sanding clearance
• Soft grip 
• Paddle switch activation 

Cons: 

• Not as powerful as some of the other models

4. Makita BO5030K 5″ Random Orbit Sander

View in gallery

This sander is what you need for smooth and fast sanding. It’s comfortable to hold – thanks to its rubberized grip that’ll also provide you with control. It also comes with a pad control system that’ll allow you to speed up the sander if required.

For your health and safety, the device also comes with a dust collection system that’ll efficiently collect dust while you’re sanding. It’s also dust sealed to minimize contamination and comes with an on/off switch for your convenience.

It’s also a corded model that comes with a ball bearing construction for precision and durability. 

Pros: 

• Comfortable to hold 
• Comes with a dust collection system 
• Dust sealed 
• On/off switch 

Cons: 

• Not as durable as some of the other models

5. Ryobi P440 One+ 18V Lithium Ion

View in gallery

Another excellent palm sander, this particular one is made with high-carbon steel, and it’s also battery-powered. It’s one of the first-ever cordless quarter-sheet sanders on the market and can be used for a variety of projects.

It’s compatible with most sandpapers and also comes with a lock-on switch for easy operation. It also has a handy dust collection bag, and each charge will provide you with over 40-minutes of runtime.  

Pros: 

• First cordless quarter-sheet sander 
• Compatible with most sandpapers
• Comes with a lock-on switch 
• Has a dust collection bag  

Cons: 

• The battery doesn’t last.

6. Ginour 6 Speed Electric Sander

View in gallery

Finally, we’ve got this powerful sander that’s great for a wide variety of applications from smoothing out wood to removing paint. It also has an efficient dust removal system that’ll help ensure the longevity of your device.

In terms of size, its unique design is compact so you won’t have to worry about your sander being overly heavy. It also comes with six speeds that you can choose from, and it can even work at a speed. of 13,000 times in one minute. That’s a lot of power for difficult polishing jobs.

Thanks to its rubberized palm grip design, this device is also comfortable. It also produces minimal noise so you can focus on your work with ease. The purchase also comes with a lifetime warranty in case you run into any issues.

Pros: 

• Suited to a wide variety of applications
• Efficient dust removal system 
• Compact size 
• Comes with six speeds 
• Cordless options

Cons: 

• The vibration is strong

What Are Palm Sanders Used For?

Palm sanders are great for smaller projects, or if you don’t see yourself using a sander often. Palm sanders are versatile and work on a variety of smaller DIY sanding projects. They’re also lightweight and budget-friendly. 

Since they’re smaller compared to other sanders, they’re great for precision. They also won’t leave marks. They’re also ideal for projects where you’re sanding down wood that has been treated or painted. 

Pros

• Lightweight and easy to handle 
• Compatible with regular sandpaper 
• Inexpensive 
• Won’t leave marks like an orbital sander

Cons

• Requires more sandpaper
• Less dust-collecting capabilities
• Not ideal for large wood pieces

How To Use A Palm Sander 

View in gallery

Finished Product

View in gallery

One of the ways to use a palm sander is when you’re sealing your deck. Below, we’ll talk a little more about how you can use your palm sander efficiently.

1. If you’re sealing your deck, you’ll want to start by sweeping your deck floor.
2. Use 150 or 180-grit sandpaper.
3. Knee pads are recommended.
4. Remove pebbles and sticks that have fallen through the cracks of your deck floor. 
5. Begin sanding the deck floor – remember to always sand with the grain and also sand the side finish pieces. You’ll also want to sand along the gaps to ensure a more even deck floor. 
6. After you’ve sanded the entire deck, you’ll also have to do the deck surface, side trim, and railings.
7. Stain the length of one board at a time. Once you’ve stained your deck, allow it to dry for at least 48 hours.

Frequently Asked Questions (FAQ)FAQ

Can Palm Sanders Be Used On Drywall?

You can use your palm sander on drywall, but an orbital sander might be a better choice as it works faster. If you don’t want to apply too much pressure and you’ll be better off using a round pad with drywall surfaces.

The best palm sanders will not damage anything, but you never know with other power tools. More than anything, you’ll need to have the right sanding paper.

Can I Use A Palm Sander If I Have Arthritis? 

Unfortunately, they’re not the best tool to use for arthritis as you will have to hold the sanders with a tight grip while you’re sanding. When you’re working with tight spaces, it can be hard on your hands, which would irritate your arthritis.

Why Does My Palm Sander Jump Around?

An out-of-balance or out-of-square backup pad can also produce defects. If you sand a flat surface and you feel the sander pulling back and forth across the surface of the wood, the backup pad needs to be replaced.

If you feel the sander bouncing as the pad rotates, then you most likely need a new backup pad. Also, you might want to check the hook and loop system to make sure it’s secure.

Why Won’t Sandpaper Stick To My Sander?

Orbital sanding pads won’t stick if debris or tears are present. To replace the hook and loop pad, turn off the power and remove the three screws on the bottom of sanders to replace the sanding pad.

What Are The Holes For On Sanding Discs?

You may have noticed that a disc sander has holes circling the center of the disc. These holes help to pull dust particles away from the sanding paper so it doesn’t become clogged with sanding debris.

Palm Sanders Conclusion

When choosing a power tool, you can never be too careful or too picky. Choosing a good palm sander requires a little research before making a purchase. The best palm sanders will depend on what you need them for and their durability.

The tools are efficient and they’re not bad for the air. If you go long periods without using your sander, before you use it again, make sure you’ll be working with the right materials and sanding the proper surfaces.

When removing material from various surfaces, because of the sanders advanced micro filtration system, they don’t pose a health risk. Of course, it’s always best to wear a face mask and protective eyewear for any sanding project.

When it comes to choosing an ideal palm sander, the most important thing to remember is to purchase one that comes with dust collection. Not only will it help with your sanding project, but also prevent you from inhaling the dust particles or sawdust.

0083

• Classify according to the type
• Classification according to industries
• Reserve pillow

Pneumatic grinding machines KAIBAO ECO

Quality B (Taiwanese quality)

6 DUM (150 mm), Samovakum,
orbit 2.5 mm orbits 2.5 mm or 5 mm, 12000 rpm
With 1.8 m conventional dust hose and conventional dust bag

Details > all products >

0083

Our pneumatic pneumatic tools include pneumatic pneumatic grinders, pneumatic polishers, pneumatic grinders, which are used in various fields.

Sheet Metal Surface Grinding,

Air Grinder

View Details >

Marble Surface Grinding,
Air Crusher

View Details >

Automotive sheet board polishing

polishing and brightening

View details >

was founded in 2009 and located in Dongguan city of Guangdong, close to Shenzhen sea port.


mainly produces pneumatic grinders, electronic grinders, pneumatic grinders, electronic polishers, air angle grinders, pneumatic grinders, pneumatic grinders, professional automatic manipulator polishers and sanding support pads. Most of our products are exported to Europe, North America, Asia, Australia.
We have Panda and Super brands for pneumatic grinders, which are well received by our customers.

At present, the company’s workshop covers an area of ​​4500 square meters, 56 assembly specialists have more than 5 years’ experience, and 8 experienced technicians provide product research and development services……

Learn More >

56

Headquarters

UPDATED NEWS

Seven Sanding Tips for Pulverizing Wood Products with Pneumatic Sanding Board

In order to polish a good product, you need not only to master the working method, but also to have certain sanding skills. If the operator cannot master the grinding skills, he will not be able to polish the smooth and smooth surface of the product. Next, we will share about Pneumatic Grindin

What is Pneumatic Sand Pole?

The pneumatic sand block is characterized in that it includes a machine locking nut threaded with the gun body, a front end with an inlet hole that extends into the internal cavity of the gun, and an air pipe connected with the gun body, as well as one end extends into the inner cavity of the gun and

What is a direct air song?

Straight grinder, also known as a hand grinder, is a double hand tool driven by a series single-phase motor through a gearbox to drive the grinding wheel for grinding operations. It has the characteristics of easy use, high speed and light weight. What is direct air

Teach you the advantages of a pneumatic reciprocating saw file (2)

can help you better understand the air file and the best application

Recommended products

Contact us

 : + 86 15916

4 9  : + 86-769-23053681
 :Sales@kaibaotools. com

Palm9 Sander 2DC Sander VONROC 2DC Operation Manual0001

VONROC PS502DC Palm Grinder

SAFETY INSTRUCTIONS

Read enclosed safety warnings, additional safety warnings and instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and instructions for future reference.

The following symbols are used in the user manual or on the product:

• Read the user manual.
• Indicates the risk of personal injury, death, or instrument damage if the instructions in this manual are not followed.
• Electric shock hazard.
• Variable electronic speed.
• Wear protective goggles.
• Wear hearing protection.
• Put on a respirator.
• Class II Machine – Double Insulated –
• You don’t need a grounding plug.
• Miniature delay fuse.
• Maximum temperature 45°C.
• Do not throw the battery into fire.
• Do not throw the battery into water. Separate fee for lithium-ion batteries.
• The product complies with the applicable safety standards of European directives.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow warnings and instructions may result in electric shock, fire and/or serious injury.

Retain all warnings and instructions for future reference.
The term “power tool” in warnings refers to your corded (corded) power tool or cordless (cordless) power tool.

Workplace Safety

• Keep your work area clean and well lit. Cluttered or dark places can cause accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that can ignite dust or fumes.
• Keep children and bystanders away when operating power tools. Distraction can lead to loss of control.

Electrical safety

• Power tool plugs must match the outlet. Do not modify the plug in any way. Do not use adapter plugs with earthed (earthed) power tools. Unmodified plugs and appropriate outlets reduce the risk of electric shock.
• Avoid body contact with grounded surfaces such as pipes, radiators, stoves and refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not expose the power tool to rain or moisture. Water entering a power tool increases the risk of electric shock.
• Do not overuse the cord. Never use the cord to carry, pull or disconnect a power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When using a power tool outdoors, use an extension cord suitable for outdoor use. Using a cable suitable for outdoor use reduces the risk of electric shock.
• If you are using a power tool in an advertisement If this cannot be avoided, use a source protected by a residual current device (RCD). The use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating a power tool can result in serious injury.
• Wear personal protective equipment. Always wear safety goggles. Protective equipment such as a respirator, non-slip safety shoes, hard hat, or hearing protection used in appropriate conditions will reduce injuries.
• Prevention of unintended start. Before connecting to a power source and/or battery, or lifting or carrying a tool, make sure the switch is in the off position. Carrying the power tool with your finger on the switch or turning on the power tool with the switch turned on can cause accidents.
• Remove the adjusting key or wrench before switching on the power tool. A wrench or wrench left on a rotating part of the power tool can cause injury.
• Don’t overdo it. Always stand on your feet and keep your balance. This allows better control of the power tool in unexpected situations.
• Dress appropriately. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothing, jewelry or long hair can get caught in moving parts.
• If devices are provided to connect the dust extractor and dust extractor, make sure they are connected and used properly. The use of a dust collector can reduce the risk associated with dust.
• Don’t let the familiarity gained from frequent tool use let you relax and ignore the principles of tool safety. Careless action can lead to serious injury in a fraction of a second.

Use and care of power tools

• Do not apply force to power tools. Use the correct power tool. The right power tool will do the job better and safer at the rate it was designed for.
• Do not use the power tool unless the switch turns it on and off. Any power tool that cannot be operated with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery from the power tool before making any adjustments, changing accessories, or storing the power tool. These preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow anyone unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Service power tools. Check for skewed or seized moving parts, broken parts, or any other condition that may affect the operation of the power tool. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to seize and are easier to control.
• Use power tools, accessories, attachments, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations other than those intended may result in a hazardous situation.
• Keep handles and gripping surfaces dry, clean and free of grease. Slippery handles and gripping surfaces make it difficult to safely handle and control the tool in unexpected situations.

Battery tool use and care

• Charge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Only use power tools with specially designed battery packs. Use of any other battery packs may result in injury or fire.
• When not in use, keep the battery pack away from other metal objects such as paper clips, coins, keys, nails, screws, or other small metal objects that may connect one connector to another. Shorting the battery terminals may cause burns or fire.
• Battery may leak liquid under adverse conditions; avoid contact. In case of accidental contact, rinse with water. If liquid gets into eyes, additionally seek medical attention. Liquid leaking from the battery may cause irritation or burns.
• Do not use a damaged or modified battery or tool. Damaged or modified batteries may behave unexpectedly, resulting in a fire, explosion, or risk of injury.
• Do not expose the battery or tool to fire or excessive heat. Exposure to fire or temperatures above 130°C may cause an explosion. NOTE Temperature “130 °C” can be replaced by temperature “265 °F”.
• Follow all charging instructions and do not charge the battery or tool outside the temperature range specified in the instructions. Incorrect charging or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• Have your power tool serviced by a qualified technician using only identical replacement parts. This will ensure the safety of the power tool.
• Never repair damaged batteries. Servicing of battery packs should only be performed by the manufacturer or authorized service providers.

ADDITIONAL SAFETY INSTRUCTIONS

• Do not use sanding sheets that are too large, but follow the manufacturer’s instructions regarding the size of the sanding sheets. Sanding sheets that protrude from the sanding pad can cause injury, block and break the sanding sheets, or cause kickback.
• Sanding lead paint is not recommended. Lead paint should only be removed by a specialist.
• Do not work with materials that release hazardous substances (eg asbestos). Take precautions if hazardous, combustible or explosive dusts are likely to be generated. Wear a protective dust mask. Use a dust extraction system.
• Do not work with materials containing asbestos. Asbestos is considered a carcinogen.
• Do not use the machine to grind magnesium workpieces.
• Wear safety goggles. Wear hearing protection. Use other protective equipment as needed, such as protective gloves, safety shoes, etc.
• Hold the machine by the insulated handles where the accessory may come into contact with hidden wiring or mains cable. If the accessory comes into contact with a live wire, exposed metal parts of the machine may also become
  ‘live’. Risk of electric shock.
• Be very careful when sanding painted surfaces.
• Remove all nails and other metal objects from the workpiece before use.
• Make sure the workpiece is properly clamped or clamped.
• Use only sandpaper suitable for use with the machine.
• Use only sandpaper with the correct size. Make sure the sandpaper is set correctly.
• Check sandpaper before each use. Do not use sandpaper that has been worn out from long use.
• Never place the machine on a table or workbench until it has been switched off.

BATTERY SAFETY WARNINGS

• Do not open the battery. Danger of short circuit.
• Protect the battery from heat such as constant intense sunlight, fire, water and moisture. Explosion hazard.
• Vapors may be released if the battery is damaged or misused. Ventilate the area and seek medical attention in case of complaints. Vapors may irritate the respiratory system.
• Use the battery only with your Vonroc product. Only this measure protects the battery from a dangerous overload.
• The battery can be damaged by sharp objects such as nails or screwdrivers or external force. An internal short circuit may occur and the battery may catch fire, smoke, explode, or overheat.

SAFETY PRECAUTIONS FOR THE CHARGER

Intended use
Use the charger to charge only battery packs type CD801AA and CD803AA. Other types of batteries may explode, causing injury or damage.

• The appliance must not be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Children must be supervised to ensure that they do not play with the appliance.
• Do not recharge non-rechargeable batteries!
• Batteries must be kept in a well-ventilated area during charging!

Electrical Safety
Always check that the volume tage of the power supply matches the volume tage on the nameplate.

• Do not use the machine if the mains cable or mains plug is damaged.
• Use only extension cables suitable for the rated power of the machine, with a minimum thickness of 1.5 mm2. If you are using an extension cable reel, always unwind the cable completely.

MACHINE DETAILS

Application
The machine is designed for sanding wood, plastic and metal. This machine is only suitable for dry sanding. The machine is not suitable for processing items containing asbestos. Misuse may damage the instrument.

TECHNICAL SPECIFICATIONS

This manual has been compiled for different kits/article numbers. Please check the appropriate item number in the specification table below for the correct composition and contents of your kit.


The following charger can be used to charge these batteries.

CD802AA Quick charger
VONROC POWER 20V battery platform batteries are interchangeable with all VONROC POWER 20V battery platform tools.

Vibration level
The vibration level stated in this instruction manual has been measured in accordance with the standard tests given in EN 62841; it can be used to compare one tool to another and as a preliminary assessment of the impact of vibration when using a tool for the applications mentioned.

• Using the tool for a variety of purposes or with other or poorly maintained accessories can significantly increase the level of exposure.
• Time when the tool is turned off, or when it is running but not actually doing its job, can significantly reduce the level of exposure.

Protect yourself from the effects of vibration by caring for your tool and its accessories, warming your hands and organizing your work schedules.

DESCRIPTION

1. Charger LED indicators

INSTALLATION

Dust bag connection (Fig. B)
It is highly recommended to use the machine with a dust bag (3) to ensure optimum dust collection.

• Place the dust bag (3) on the dust extraction tube (6) by rotating it slightly.
• Continue to slide in a twisting motion until the dust bag (3) is slightly above the rubber ring (7), locking it in place.

Note: The dust bag should be emptied when it is half full to ensure optimum dust collection.

Installing and removing sandpaper (fig. C)

• Hold the machine on its side or upside down as shown in fig. C1.
• Place sandpaper (5) with the required grit size on the sanding pad (4). Make sure that the perforation on the sanding paper (5) matches the perforation on the sanding pad (4) as shown in fig. C2.
• To remove the sandpaper (5), simply remove the sandpaper from the sanding pad (4).

Note: Use coarse sandpaper for sanding rough, uneven surfaces. Use medium sandpaper to remove remaining scratches from coarse sandpaper. Use fine sandpaper to finish surfaces.

• Remove the battery before any work on the power tool.
• Battery needs to be charged before first use.

Installing the battery in the car (fig. D)

Make sure the outside of the battery is clean and dry before connecting it to the charger or car.

1. Insert the battery (8) into the base of the machine as shown in fig. D.
2. Slide the battery forward until it snaps into place.

Removing the battery from the machine (Fig. D)

1. Press the battery release button (9).
2. Remove the battery from the machine as shown in fig. D.

Checking the state of charge of the battery (fig. D)

• To check the state of charge of the battery, briefly press the button (10) on the battery.
• The battery has 3 lights to indicate the charge level, the more lights on, the more the battery is charged.
• When the indicators are off, the battery is low and needs to be recharged immediately.

Charging the battery with the charger (fig. E)

1. Remove the battery (8) from the machine.
2. Turn the battery (8) upside down and insert it into the charger (12) as shown in fig. E.
3. Push the battery in until it is fully seated in the slot.
4. Plug the charger into an electrical outlet and wait a while. The LED indicators on the charger (13) will light up to show the status of the charger.

After the battery is fully charged, unplug the charger from the socket and remove the battery from the charger. If the machine is not used for a long period of time, it is best to keep the battery charged.

OPERATION

Switching on and off (fig. A)

• To turn on the machine, turn the switch (1) to position I.
• To turn off the machine, turn the switch (1) to position 0.

Tips for optimal use

• Hold the machine firmly with both hands.
• Switch on the machine.
• Place the sanding pad with sandpaper on the workpiece.
• Move the machine slowly over the workpiece, pressing the sanding pad firmly against the workpiece.
• Do not put too much pressure on the machine. Let the machine work.

MAINTENANCE

Always turn off the machine and remove the battery from the machine before cleaning and maintenance. Wipe the machine body regularly with a soft cloth, preferably after each use. Make sure the ventilation openings are free of dust and
dirt. Remove very stubborn dirt with a soft cloth dampened with soapy water. Do not use solvents such as benzine, alcohol, ammonia, etc. Such chemicals can damage synthetic components.

ENVIRONMENT

Defective and/or recycled electrical or electronic devices should be collected at an appropriate disposal site.

EU only
Do not dispose of power tools with household waste. According to European Directive 2012/19/ EC on Waste Electrical and Electronic Equipment and its implementation in national law, power tools that can no longer be used must be collected separately and disposed of in an environmentally sound manner.

WARRANTY

report this ad

VONROC products are designed to the highest standards of quality and warranted to be free from defects in materials and workmanship for a statutory period from the date of original purchase. Should any failure occur in the product during this period due to defective material and/or workmanship, please contact VONROC directly. The following circumstances are excluded from this warranty:

• Repairs and/or alterations to the machine have been made or undertaken by unauthorized service centers;
• Normal wear;
• The tool has been abused, misused or improperly maintained;
• Non-original parts used.

Documents / Resources

Recommendations

• VONROC Gereedschap & Tuin artikelen

April 14, 2022 April 15, 2022

Do you have a grinder ?

You still got that belt sander ?

planer grinder machine 149002 slide

17. Plane grinding no machine 149002 1

You will see a century old and fully functional grinder machine , which is driven by a drive and a hydraulic turbine.

You will see a unique hundred year old grinding plant in its original form and fully functional, which is powered by a shaft line and water turbine.

Did you take my sanding disc ?

Do you take my grinding wheel?

Palm oil

Palm Oil

Crude Palm Oil

Mash

9000 GAS

Where is the machine?

Where is the Machine ?

Whiskey or be it palm wine.

Single machine

Why is machine switched off?

Why’s this machine down?

Hand on machine .

Left arm on the bar.

What am I machine !

That I am a machine !

This is the loom .

It’s a loom .

Printing press unrolled.

My press has been damaged… my vowel tray beyond repair.

This is machine of fate.

We call this the Loom of Fate.

Similar to milling machine .

Whoo! It looks like a rototiller.

Like machine , right?

Like doughnuts, right?

Doing palm oil

All we had was palm tree oil.

A violent quarrel broke out, which was increased by two guards, who took the side of one of the sun loungers, and scissors sander machine which was equally hot on the other side.

A fierce quarrel broke out, which was increased by the two guardsmen, who took sides with one of the loungers, and by the scissors grinder, who was equally hot upon the other side.

A violent quarrel broke out, which was increased by two guards, who took the side of one of the sun loungers, and scissors grinding machine tool which was equally hot on the other side.

A fierce quarrel broke out, which was increased by the two guardsmen, who took sides with one of the loungers, and by the scissors grinder, who was equally hot upon the other side.

Press was damaged.

Its printing press was destroyed.

Bench grinder, single phase

Our printing machine Internet.

Our printing press is the Internet.

I have a press .

I have a printing press .

My machine on the shelf.

Use my razor on the shelf.

Bring me the loom .

Bring me my loom .

This machine is so old.

That Ioom is so old.

Just bring me machine .

Just bring me the loom .

Printing press do you have?

Printing press with you?

Put it on machine .

Put it on the tripod!

Loom will be here.

A loom will be placed here.

Machine issued his name .

Well, his name came up.

You have a nice machine .

You got a nice bedunkadunk.

We wanted to break machine .

We wanted to break the machine .

Yes, for the new machine .

Aye, a new press .

Manufacture of CE certified hand and pneumatic tools for over 44 years

GISON MACHINERY CO., LTD.

Taiwan high-tech air tools and pneumatic tools manufacturer

GISON has about 500 calibers and more than 1000 molds for processing and manufacturing any air tool. Their versatile manufacturing and design capabilities have enabled them to offer solutions that are reasonably priced and competitive. At GISON, their processing is ISO-9 certified001: 2015, CE approved products and their pneumatic hand tools are sold worldwide to 50 countries.

GISON Heavy-Duty Air Pneumatic Tool Product List

GISON Machinery Co., Ltd. specializes in manufacturing, supplying and exporting pneumatic tools (pneumatic tools) with a factory in Taiwan for over 40 years. All of our air tools are made in Taiwan. It has always been our goal to manufacture the finest air tools/pneumatic tools and deliver them on time with considerate after-sales service. Inquiries from global wholesalers, distributors, buyers, Air Tools agents and OEM/ODM are welcome. If you are interested in our pneumatic wrenches, pneumatic wrenches, please contact
with us now.

New Products

More Info

Robotic Sander / Sander

More Info

Drill stand

More Info

Air wrench

More Info

Air grinder

More Info

Pneumatic grinder

More Info

Pneumatic Orbital Sander

More Info

Air Polisher

Wet air tools for stone, granite, marble

More Info

Air Hammer

More Info

Air engraving pen, air scriber

More Info

Air Drill

More Info

Air screwdriver

More Info

Pneumatic hydraulic riveter

More Info

Pneumatic Remote Setter

More Info

Pneumatic Stapler, Pneumatic Nailer, Pneumatic Fastener

More Info

Air C Hog Ring

More Info

Air seal cutter

More Info

Air saw, air file

More Info

Air Cutter

More Info

Air Nipper

More Info

Pneumatic metal shears

More Info

Air cutter

More Info

Air secateurs, secateurs, scissors

More Info

Air Drill

More Info

Pneumatic punch and flange tool

More Info

Air knife

More Info

Air Smart Eraser

More Info

Air buffer for tires

More Info

Air suction dent remover

More info

Spray gun

More Info

Air compaction gun

More Info

Pneumatic grease gun

More Info

Air Spot Sandblaster

More Info

Air Coater

More Info

Air cleaning gun

More Info

Air Miracle Pistol Kit

More Info

Air blow gun, Air dust guns

More Info

Air preparation unit (air filter, air regulator, lubricator)

More Info

Spring Balancer

More Info

Air hose reel and balancer

More Info

Air coupler (plug, socket, connection)

More Info

PU air return hose

More Info

Pneumatic pump / air cartridge

Suction lifter

More Info

Article sections

1. The GP-VR120 Linear Sliding Guide is an auxiliary tool to help you improve your straight line performance on a variety of flat surfaces.