Bathroom home improvement: Bathroom Remodeling & Bathroom Renovation near me

Enough space. Cramped bathrooms can cause a child to become defensive and prevent participation in toileting or bathing. In some cases, insufficient space is the child’s only barrier to normal toileting. Often there is a need to reorganize the bathroom or add additional adjacent square meters to it in order to solve the problem of protective behavior in tactile contact, claustrophobia or sensory overload.

Security issues . Pay attention to safety issues such as slipping and falling, preventing burns, electric shocks and broken glass. Consider slip-resistant flooring, well-insulated electrical wiring, and tempered glass and mirrors.

Floor drain . Splashes of water make the floor slippery; its endless wiping for the safety of the child is a laborious process, for which there is not always enough time. The most effective way to control spilled water is to drain it. After installing the floor drain, splashed and spilled water will simply drain into the sewer. Installing such a drain is a simple and very useful modification that can have a significant impact on the comfort and safety of an autistic child in the bathroom.

Use wall-mounted . This is especially true in the case of the toilet. It is highly recommended to install wall-hung toilets with a barrel and flush mechanism mounted in the wall. Wall-mounted toilets free up floor space and provide legroom, which is important for comfort when assisting a child. Toilets without floor bases also make bathroom cleaning much easier.
Handrails and hangers. Most bathroom accessories are too fragile to hold on to, especially in a bathroom that is used a lot. Standard plumbing objects and handrails are also not always designed for non-standard activities and games, as well as helping to lift the child to his feet or keep him in a sitting position with each use. It is advisable to replace such handrails, along with towel racks, with stationary, strong metal handrails with permanent fixtures.

Openable windows and natural light . Bathrooms are not always located against exterior walls, but if possible, find a way to provide natural ventilation and natural light. This is necessary to create a healthy, open and pleasant bathroom environment for the child. Installing an exhaust fan may not meet all of the above requirements, however, if this is your only choice, try to find a powerful fan that produces the least amount of noise and vents the air outside.

Secondary heat sources . Underfloor heating, heat lamps and electric air heaters are the best solution for moisture control, mold and slip prevention. It also has the advantage of creating a welcoming environment in the bathroom for temperature sensitive children.

Source: http://iacc.hhs.gov/events/2011/091511/homes_that_work_091511.pdf

Posted in: Advice for the family of an autistic child

Next
Previous
Main page

Plants in the bathroom – is it possible?

Contents

• 1. Plants for a bathroom with a window
• 2. If there are no windows in the bathroom
• 3. Caring for plants in a bathroom without a window
• 4. If there is not enough additional lighting
• 5. Selection of plants for the interior bathroom
• 6. A few final tips

A bathroom decorated with flowers can be a great place to relax after a tiring day at work. Indoor plants will make even a small standard bathroom more attractive. But not all flowers will be able to grow in conditions of high humidity and lack of natural light.

Additional sources of artificial light will help partially solve the problem. However, these measures are sometimes not enough to meet the needs of plants. Does this mean that landscaping a bathroom is an almost impossible task? It all depends on the size and some features of the room.

Bathroom Plants with a Window

Spacious modern bathrooms today often have a large window that provides plenty of light and fresh air. In such conditions, almost any plant can be grown, except for those that, perhaps, do not tolerate high humidity at all.

Thanks to good ventilation in a bathroom with a window, there are no too sharp temperature changes, water does not stagnate here, mold and fungus do not develop. Therefore, such a bathroom is almost an ideal place for moisture-loving plants. Some species grow here even faster and better than in an ordinary room, for example, Dieffenbachia, Ficus, Cyperus. TO PHOTO: A window sill in a bathroom with a window is a great solution for moisture-loving plants!

Can be kept in a bathroom with a window and many flowering plants – Camellias, Hibiscus, Saintpaulia. True, when growing the latter, it must be borne in mind that they do not tolerate direct moisture on the leaves, so these flowers should be placed away from the sink, bath or shower. Various types of palm trees (Hovea, Hamedorea) are suitable for a spacious bathroom, on the floor of which these plants can be placed in large tubs or pots.

Care for plants in a bathroom with a window is almost the same as for those growing in other rooms. But due to the high humidity, the flowers here do not need to be sprayed. And the plants are usually watered once a week, sometimes less often – as the soil dries up. If warm floors are installed in the room, the substrate dries out faster, in this case, the frequency of watering is increased.

If there are no windows in the bathroom

More often than not, there is no window in the bathroom. Therefore, it will be difficult to grow even the most shade-tolerant and moisture-loving plants here. Without additional sources of lighting, any flower will die from a lack of light, or at least quickly lose its decorative appearance.

It is better to choose tropical plants for a small bathroom, for which high humidity, shading and temperature changes in the room are close to natural living conditions. Plants with plain dark green leaves are the easiest to tolerate the absence of the sun, while species with bright and variegated leaf blades lose all their attractiveness in artificial light.

In a standard windowless bathroom, flowers that need artificial lighting can take root: Tradescantia, Philodendron, Monstera, Aspidistra. One of the most unpretentious plants is Dracaena – some of its species are very shade-tolerant. Of the ampel varieties, the lack of light tolerates Scindapsus well.

Some orchids, such as the Phalaenopsis, can also be used as decorations in the bathroom with good long-term illumination. In the natural environment, these are epiphytic plants with aerial roots growing in humid forests on tree trunks. Bathroom conditions are quite suitable for them.

NAF OTO: Phalaenopsis Orchid thrives and blooms in a bathroom with artificial lighting

Plant care in a bathroom without a window

A bathroom without a window must be thoroughly ventilated . High humidity causes the appearance of fungus, mold, and some plant pests. The door of the room should be left open at night so that the room dries out. Walls and floors after hygiene procedures also need to be wiped dry.

You should also take care of additional light sources . You can use fluorescent lamps, having previously installed reflectors or screens on them to increase the illumination. Ideal illumination is provided by phytolamps, the radiation spectrum of which contributes to the growth and development of plants. The backlight should be turned on for at least 8 hours a day, the optimal duration of artificial daylight in the bathroom is 12-14 hours.

The leaves of the plants should be wiped with a damp sponge at least once a week, as they may be exposed to various chemicals usually stored in this room. Contamination of leaf blades with chemical agents interferes with the normal respiration of plants.

If there is not enough additional lighting

Plants in a windowless bathroom often suffer from a lack of light, even with additional light sources. The following signs may indicate this:0003

• The stems and leaves of flowers stretch out.
• New leaves grow smaller and duller than old ones.
• The lower leaves dry up and fall off.
• Apical buds do not develop.
• Flowers or buds fall off.
• Small, pale, dull flowers appear or no bloom at all.
• The plant stops growing.

If there are signs of a lack of sunlight, which usually appear 1.5–2 months after the transfer of the plant to the bathroom, it is better to move the pot to a more lit place.

Selection of plants for the interior of the bathroom

When choosing flowers, the size of the room is of great importance. Ampelous plants are ideal for small rooms: Philodendron (as well as Scindapsus or Roycissus) or some types of Saintpaulia. They do not take up precious floor space and can be used to beautifully decorate walls or cabinets. If the area allows, then a tub with a large plant, for example, Ficus or Monstera, looks good on the floor. TO PHOTOS: In a spacious bathroom, a single plant in a floor container looks particularly sophisticated

An important role in the selection of plants is played by the design of the bathroom. A pleasant contrast to the walls lined with light-colored tiles will be created by instances with a dark saturated color of the leaves. If wood predominates in decoration or accessories, it is better to place palm trees or ferns with openwork foliage indoors.

Some plants can be placed in the bath temporarily, for example only in the evening or during the flowering period. In the absence of direct sunlight, flowering continues for a longer period. After staying in the bathroom, the pots are transferred to a well-lit place and additional feeding is organized for the flowers.

Where should plants be placed?

The smaller the tub, the more difficult it is to arrange the plants so that they look nice. The easiest way is in the bathroom with a window – there the window sill will be the most successful place. But even in small rooms you can fit flowers into the interior.

The walls can be used for hanging flower pots. Wall shelves are also a good option for placing both ampelous and small plants. Bathroom design will become more interesting if you arrange the shelves in a checkerboard pattern. An ampelous plant on a shelf looks good in the corner of the room. PHOTOGRAPHED : Small plants in hanging pots save space in the bathroom

The floor is a great place for tree plants, small palms or any tall flowers. It is best to place flowers in the corner of the bathroom so that they do not interfere with approaching the shower, sink, bath.

Wardrobes can be used if the bathroom is too small to accommodate special plant shelves. Hanging or small specimens are usually placed on the top of the cabinet. A good place for lush flowers of medium size can be a small cabinet.

Where should flowers not be placed?

Planters should not be installed where they can be easily dropped or damage to plants – on the sink, washing machine, bath tub, near the shower. It is necessary to select a place for flowers in such a way that detergents, cleaners or cosmetics that are often used in the bathroom do not get on them.

A few final tips

1. For the bathroom, try to choose plants from the tropics – they are usually more resistant to high humidity and lack of light.
2. Do not put too many plants in the bathroom. In a small room, one large flower or two to three small ones is enough.
3. Moderate watering will keep the flowers from root rot. The humidity in the bathroom is already high, therefore, even moisture-loving species will need to be watered less often than usual.
4. If cosmetics or household chemicals come into contact with the leaves of the plant, immediately wipe them with a damp sponge.

Bathroom renovation in a new building

All types of work: from ceiling to sewerage

Full reporting on the work of Russian teams

Measurement and estimate free of charge, volume discount!

Prices for bathroom renovation

One of the directions in the work of our company’s specialists is the renovation of a bathroom in a new building.
When renovating housing in a new building, maximum attention will be focused on the bathroom, this is due to the difficulties in carrying out repair work, and the high cost of the materials used in the work.

Cosmetic from 1 910 p. ²

Capital from 4 340 p. ²

euros from 6 190 r./M ²

Go to calculation of price

Features in a new building

• For obvious reasons, dismantling work is excluded, so the main task for workers will be the maximum leveling of all surfaces, including floors and ceilings. The ideal geometry of the walls is the best friend for facing tiles of any type and size.
• Installation of communications must be carried out in accordance with the design project, which should also indicate the equipment planned for use in the future. It can be a washing machine, a shower cabin, etc.
• Very expensive repairs in the first year of the “life” of the house should not be done, as its shrinkage will affect the results of the work, dampen the mood and cause waste. The best way out will be an inexpensive tile, which will not be a pity to remove after 3 – 4 years.

By the way, the only disadvantage when repairing a bathroom in a new building is the installation of utilities. The pluses include the ability to create a room of any design, and at the same time no dismantling work.

Repair steps

1. Cement floor screed
2. Wall and ceiling leveling
3. Installation of utilities
4. Installation of external electrification elements
5. Bathroom tiling
6. Plumbing installation

As a rule, a bathroom in a new building is combined with a bathroom, so all you have to do on this point is to choose the appropriate plumbing equipment, and everything else has already been described above. The cost of repairs will depend on the area of ​​​​the bathroom, the volume and complexity of the work being done. The amount of total costs will primarily be affected by the cost of the materials used in the repair.

You can trust us!

• SRO approval SRO approval is a guarantee of the quality of all work that will be performed at your facility. We carry out our activities legally, and we are fully responsible for the final result of the work carried out!
• Certificates During our work in this direction, we have received a well-deserved degree of trust. A large number of certificates received is an official confirmation of the professionalism of our company’s employees.

• Estimate for repairs The team of measurers and estimators of our company allows us to make an ideal estimate for each project separately. We do not approach the preparation of estimates in a stereotyped way, but act strictly on the basis of real conditions!
• Sample contract A formally concluded contract that sets out the obligations of our company as a contractor will allow you to be protected within the law. It is safe to cooperate with us!

• Work procedure The work procedure is based on the experience of carrying out repair and finishing works, and it can be considered perfect. It is in this form that the services rendered will lead to the highest possible result with minimal time.
• Repair insurance When concluding a contract for the provision of repair services, we draw up an insurance policy for the client free of charge. As a result, your property and the result of the repair itself will be insured against any risk.

Prices by type of work

Name of work	Cost
Demolition of brick walls	from 280 rubles/m. 2
Wall putty	from 300 rubles/m. 2
Slope plastering	from 600 rubles/m.p.
Wall and ceiling primer	from 45 rubles/m. 2
Ceiling painting	from 250 rubles/m. 2
Wall papering	from 290 rubles/m. 2
Door block installation	from 4000 rubles / piece
Brick walling	from 900 rubles/m. 2
Wall cladding with ceramic tiles	from 1400 rubles/m. 2
Chasing surfaces 20 mm.	from 150 rub/m.p
Electricity meter installation	from 1200 rubles / piece
Installing socket	from 200 rubles/piece

READ ALL THE PRICES FOR REPAIR AND FINISHING WORKS!

VIEW PRICE LIST

What types of repair and finishing works we perform

Examples of our work

Leave a request:

Leave your phone and we will call you back as soon as possible!

By submitting data, you accept the terms of the agreement

Bathroom in a wooden house

Bathroom planning

The most favorable area for the bathroom should be determined immediately, when drawing up a project. Most often, its location is complex and is interconnected with other rooms. And those, in turn, also rationally, to save money, are connected to the sewerage and water supply.

In cases where there are no special restrictions in the means for arranging internal communications, the convenient use of the bathroom comes to the fore, then it is planned close to the sleeping quarters and dressing room.

In two-story houses, several sanitary facilities can be planned, and they can be located not only on the first, but also on the second floor. Large families will especially benefit from this. It is worth noting that in two-story houses, sanitary facilities are located one above the other, which is mostly associated with the installation of a sewer riser.

If you still want a bath on the second floor in a wooden house, then you should pay special attention to calculating the load on the floor. For a cast-iron bathroom, this is especially true, because cast-iron products weigh quite a lot. And if you fill the bathroom with water, then the load on the interfloor ceiling increases by 2-2.5 times.

For the bathroom on the second floor, it is desirable to use acrylic bathtubs or abandon them in favor of a shower cabin.

For these reasons, the overlap should be made as reliable as possible. And for this, you need to reduce the step between the beams, while increasing their thickness, compared with the rest of the sections. It is advisable to make the floor in the bathroom a little lower than the level of the floors in other rooms. This will make your home less likely to flood.

After you decide where the bathroom will be, calculate its area, you will need to schematically distribute plumbing equipment on the drawing. Decide where the toilet, sink and bath will be installed. In this way, it will become easier for you to determine the scheme for laying engineering communications.

After the floor in the bathroom, you need to take care of the walls, as splashes of water can fall on a log or timber, and this is not desirable. The traditional use of ceramic tiles, panels in the bathroom at home using shrink technology is somewhat problematic, since vertical movements are possible when humidity changes.

Bathroom waterproofing value

Wood is one of the most environmentally friendly materials used in construction, but its main disadvantage is its low resistance to moisture. Thus, it should be noted that waterproofing is almost a key part of the process of finishing work on a bathroom in a wooden house. To provide greater protection to the internal structure of a wooden building, different methods can be used.

The first step is to ensure that moisture does not penetrate the bathroom floor. It will stop the spread of moisture to other places. First, the floor is covered with bituminous insulation or cement mortar. The choice of the future subfloor will depend on the bearing capacity of the floor. The structure needs to be strong enough to carry the weight of the grout, flooring and plumbing. Otherwise, we advise you not to take risks and use bituminous mastic or similar material.

This issue is especially relevant for the bathroom on the second floor of a log house, when the ceiling is also made of wood.

As soon as the material dries, it is necessary to lay a layer of waterproofing, most often rolled material. Nowadays, waterproofing films are distinguished by their strength property, as well as their durability. Heat loss in winter is reduced to a minimum, the air is passed through much better, and it also completely retains steam and moisture. A floor covering is laid on top of the roll film.

In addition to the common waterproofing film, to isolate the floor from water in the bathroom of a wooden house, they do:

• Cast insulation. The floor is filled with material melted to a liquid state. Thus, soft protection is provided. For rooms with a high load, this method is not very suitable.
• Paint. The method stands out for its simplicity and economy. True, it will periodically be required to update it.
• Impregnation. Makes wood more sustainable and durable.
• Coating materials. The central component of waterproofing mixtures is bitumen. Such mixtures are applied in layers, and certain periods of time should be maintained between sets.

It is important to remember that before using a coating waterproofing, you need to make sure that the wooden boards are dry, because wet wood begins to deteriorate from the inside.

As a rule, many cannot decide how to protect the tree in the bathroom in a wooden house. The ideal option for you would be a combination of materials. Roll film can be used on flat areas of the floor, and paint on hard-to-reach areas.

The traditional solution for a bathroom floor made of ceramic tiles or porcelain stoneware in a wooden house can also be implemented, but it is more difficult to do. The main task will be to provide a rigid base for the floor.

For waterproofing vertical surfaces, you can use the following options:

1) Upholstery with polyethylene film. Pretty easy to do by hand. You only need to cut off the required amount of film and, using a construction stapler, attach it to the wall. In addition, it is very important to create a high-quality ventilation system. The method is primitive and not very aesthetic.

2) Treatment with a water-repellent solution. Woodworking helps the walls retain their original appearance. The problem is that this method does not protect well from large flows of water, for example from a shower.

3) Installation of plastic panels. The simplest and fairly cheap solution for protecting walls from moisture. It would seem that it is simpler, but the log house is subject to shrinkage, and with increasing humidity there may be a slight rise. Vertical panels in this case will warp, for this reason they cannot be attached directly to a wooden wall.

4) An independent internal frame for finishing in the bathroom and other wet zones is, perhaps, the only or the best solution to the problem of waterproofing the walls of the bathroom of any wooden house, including log houses.

Shrinkage log house and bathroom

Definitely a big problem that appears when building a house from a bar or a log of natural moisture is the shrinkage of a log house, which is most evident in the bathroom. In potentially wet rooms, frequent changes in moisture and temperature are possible. It is here that the vertical mobility of the frame is maximum.

Dry wood is a rather light building material, its natural weight, quite possibly, will not be enough to prevent deformations, in particular on the upper crowns. This problem is solved with the help of special spring shrinkage compensators. The compensator is a spring-loaded anchor, which is installed vertically inside a beam or log, and provides a constant contraction of the two elements with a certain force. The node does not require any maintenance.

It will ensure the uniformity of shrinkage of the structure of their tree, reduce the amount and time required for shrinkage, and the installation of expansion joints will reduce to zero deformations and voids. You can take on the interior decoration after three months from the moment when the assembly of the log house was started. The shrinkage of houses is not often the same. Its degree depends on the size of the building, the time required for its construction, the required wood material.

In the situation with a log of natural humidity of log houses, the situation is somewhat different. The log has bulges and has a greater weight per unit of height, in addition, its moisture content is higher than when using chamber drying materials. As a result, the chopped log shrinks under its own weight, but for finishing work it is necessary to wait 9- 12 months.

In both cases, the problem is the use of vertical elements, since shrinkage along the length occurs to a lesser extent than in the diameter of the log (width and height of the beam). For supporting elements, special adjustable expansion joints are used, and internal frame partitions are installed only after complete shrinkage.

Variants of realization of bath walls in a wooden house

Decorating the walls of a bathroom in a wooden house, especially in a log house, with wallpaper, plaster, and tile is extremely difficult. This is due to the features of shrinkage technology. In fact, the walls can only be painted.

However, it is possible to prepare a special frame on which sheets of moisture-resistant drywall will be attached, sometimes it can be replaced by OSB panels or other materials.

Such a frame is completely or partially independent of the main wall. It is not affected by shrinkage processes. For this reason, you can carry out a traditional bathroom finish.

Ceramic tiles in the bathroom of a wooden house, as a rule, are lined with the lower part of the walls to a height of 1.5 – 1.7 m. Then either lining is used or the log house is left open. It does not make sense to completely abandon the use of wood in the interior. For the upper part of the walls, wallpaper and plaster can be applied.

From all this, a very beautiful room is obtained, which has its own style. Full closure of the walls is mandatory, provided that their appearance, so to speak, is not very attractive. In particular, this applies to houses that were built a long time ago and already have many cracks.

When finishing the bathroom, which is located in the attic, the walls are finished with plasterboard, and the rafters and beams can be left open – this will look especially attractive. In the case of an insulated roof, when the rafters are closed, a board finish would be a good solution.

Independent frame in bathroom

A feature of the independent frame for finishing the wet area in the bathroom is the absence of its attachment to the outer wall. It is made with increased rigidity and is self-supporting. Often implemented with ordinary brickwork inside the log house. As a result, such a wall takes on the entire water load.

Naturally, such a frame can also be made from other materials, for example, a metal profile for drywall, followed by sheathing with moisture-resistant plasterboard or gypsum fiber board, cement particle board and other materials, on top of which ceramic tiles can be mounted without any difficulties.

The main advantage of this implementation is the absolute independence from shrinkage. The main disadvantage is the need to indent from a wooden wall and sufficient thickness to ensure load-bearing capacity. As a result, the loss of a sufficiently large space in the bathroom.

Sliding frame in log cabin bathroom

The essential difference between a sliding frame and an independent frame is space saving and the ability to hide the gap between the finished surface and the outer wall. This version of the frame is held by fastening to the main wall, which is subject to shrinkage, but the attachment point passes through an elongated hole through which the fasteners can slide during the shrinkage of the log house.

The sliding frame is made of timber or a metal profile for drywall. And in the upper part, between the main ceiling and the frame ceiling, leave a shrinkage gap of 10-15 cm. This will depend on the height of the room.

If the installation is made on a log, then vertical grooves are made to compensate for the bulge of the log. It is problematic to use fasteners for a metal profile in a log cabin, for this reason, experienced carpenters do not use metal to make partitions and sliding frames, but use all the same wood – bars with longitudinal holes through which they are attached to the log house.

Lacing (surfacing) the walls in the bathroom

In some cases, in a log house in some rooms, work can be done to level the plane of the wall, that is, the bulges of the log are removed. So they make a kind of gun carriage only on one side. In ancient Russian architecture they were called “wall in las”.

What does this procedure give? It has two important meanings, the order of which everyone determines for himself.

1. Leveling the wall for ease of hanging or placing furniture (much easier on a flat wall).
2. An increase, albeit a slight one, of the space inside.

Knocking off the ledges of logs

wall alignment result

At the same time, rarely does something good come without a fly in the ointment. As a result, the most dense layers of wood are cut down and cracks begin to form precisely on the leveled part of the log. At the same time, the diameter of the log also decreases.

Wood glazing

Glazing is a method that consists in the fact that linseed oil, drying oil or other translucent paints are applied to the surface of the product. This method makes it possible to obtain a transparent surface of the wood product. Usually, the glazing method is used to finish such tree species as: ash, pine, cedar, oak and larch.

Glazing of different types of wood

Before glazing a tree, you need to prepare its surface by cleaning it of dust, removing dirt and degreasing it. Drying oil and oil from flax in their purified form are usually not used: these substances must be diluted with turpentine in a ratio of 70 to 30. A hot mixture is applied to the surface that needs treatment with a soft brush or swab in several steps. Intermediately, between the application of layers, it is necessary to dry and sand each layer properly.

Glazing paints, glazes, also create a translucent coating that allows you to protect the wood from moisture. At the same time, the texture of wood is preserved, and its color can be changed, giving a richer look.

Glazing in the bathroom is suitable for places where there is no constant contact with water. At the same time, the presence of wooden surfaces creates a special mood in the interior.

The wall is covered with azure

Ceramic tiles on drywall

Bathroom tiles

It is necessary that the finishing materials for the walls and floor of the bathroom can easily withstand temperature changes and high humidity. For this reason, tile has a high popularity among other finishing materials.

A non-standard way of layout and an interesting combination of colors and textures can easily change the proportions of the room. In small rooms, it is better to use small tiles in order to visually make the space inside wider. Also, tiles help to smooth out the disadvantages of the layout. A variety of textures offered by manufacturers will perfectly emphasize the style of your interior.

Another positive quality of the tile is its ease of maintenance. The smooth surface is easily cleaned from soap deposits and residues of cleaning products. With good care, a tiled bathroom will bring you nothing but joy. It remains only to enjoy this comfort.

The use of internal frames allows you to successfully use ceramic tiles for the bathroom.

Floor in the bathroom of a wooden house

Shower cabin in the bathroom of a wooden house

The need for the bathroom is the arrangement of an additionally reinforced floor. A constant load has a negative effect on the tree, in particular when it is located in a place of high humidity. And in the bathroom, where the bath water creates a lot of mass and stresses the beams, the risk of early deterioration of the floor is increased.

For this reason, reinforced logs are placed in the bathroom floor. These boards are distinguished by an increased cross-section. All these difficulties can be avoided if the bathroom is located on the first floor, and the floor is made not on wooden logs, but on concrete.

Materials are well suited for the bathroom floors of a wooden house: tiles, mosaics, linoleum, moisture-resistant laminate, wood, porcelain stoneware.

Porcelain tile is most often laid on bathroom floors. Sufficiently durable and outwardly beautiful material, it is not demanding for special efforts during care, it perfectly tolerates interaction with moisture and household chemicals. For the installation of porcelain stoneware, it is simply necessary to make a screed of sand and cement.

Such materials can only be laid on a stable and perfectly level floor, and wooden boards do not meet these requirements. Before making a screed, you need to make the floor overlap stronger. Otherwise, due to the fact that the load also comes from cement, the floor may well fail.

At this stage, you need to take up the installation of underfloor heating, of course, if they were planned. It is also required to install two-layer insulation under the screed to prevent moisture from affecting the subfloor. And then, after all the preparatory work has been carried out, it will be possible to lay the finishing material.

Wood can help create an overall style, so using it may be appropriate. It is necessary to choose such types of wood so that the floor can last as long as possible. Teak, for example, is very well suited to cover the field. Teak is relatively cheap, and the oils that make up the wood increase its moisture resistance. After completing the installation of such a floor, it is necessary to fill each slot with a specialized sealant.

Also a good option, as a floor for the bathroom, will be larch, because it has good resistance to moisture. Another option can be a thermowood, it is processed with hot steam in a vacuum, by the way, it is not exposed to mold. You can not do a screed on a wooden floor. You can get away with laying a moisture-proof coating.

Bathroom ceiling

As a rule, the ceiling in the bathroom of a wooden house is suspended – from moisture-resistant GVL, it is puttied, then painted. You can make it stretch, aluminum rack, PVC panels, hem with a well-finished board. It is important to prevent steam from entering the ceiling. For these purposes, vapor-impermeable membranes are taken. The membranes are often attached to the ceiling with staples of a construction stapler.

The central task during the installation of a vapor barrier is to create tightness. To make this possible, the material is placed on the walls, the membrane strips are overlapped and glued twice with double-sided tape. In addition, it is worth gluing all the places where the fasteners are installed with adhesive tape. Conscientiousness of performance of works is obligatory.

The next component is providing a good microclimate – high-quality ventilation. In the bathroom of a wooden house, ventilation is necessary both natural and, let’s say, forced, that is, with a fan. In this case, the fan in the sanitary unit will start working when natural ventilation cannot cope with its work.

Bathroom layout ideas

Quite a few interesting ways can be thought of in order to choose the location of the future bathroom. For example, if you live in a house that consists of two floors, a convenient solution would be to place the bathroom next to the bedroom. An attic bathroom is also a good option.

Often you can find a bathroom combined with a bathroom, but often this option is not considered convenient. To use a joint sanitary unit at the same time by a couple of people, it is possible to put a partition in it or get by with a beautiful curtain. It is often advised to leave a separate room under the bathroom, all this is done so that there is no unnecessary furniture left in it, which will be subject to high humidity.

The bathroom needs as much space as possible. The best solution would be to choose a room without windows. For this room, they are redundant. But, in the case when there is still a window, you need to choose curtains made of dense materials, put blinds on the windows, or maybe opt for some other way to hide your loved ones from prying eyes.

Wooden house bathroom design

Classic. This style does not cease to be relevant and does not lose public interest in itself. The classic is replete with its decorative elements, lines so smooth and as if flowing from one to another and overly decorated furniture. This style is well suited for a decent-sized mirror, about human height, in a thick wooden frame, and indeed wooden furniture.

Minimalism. The polar opposite of the classics. Furniture is used critically little, and even that includes only the most necessary. The severity of lines and the accuracy of forms – that’s what characterizes minimalism. Monochromatic, light, calm colors are used.

Country. Warm colors and wooden furniture are used. This style looks good in the bathroom as it is elegant and quite simple.

Antique. In a wooden house, such a design will look very profitable and harmonious. Emphasis is placed on the choice of curtains with a floral pattern, made of heavy fabrics, shabby wooden furniture, pastel shades are used in the design.

Modern. An interesting design for decorating a room, modern combines clarity and lightness of lines. Its elements are often repeated, as well as modern materials are used, a certain harmony is formed between beauty and convenience.

High tech. It is assumed the use of glass, as well as steel and wood elements. A characteristic feature of hi-tech is its non-standard forms. It is very pleasant to spend time in a room made in this style.

For many people who live in wooden houses, it is often quite difficult to find a good material for finishing the bathroom, such that it ensures the reliability of its use. The specificity of the premises leads to the fact that the desire to make it beautiful should border on the desire to make it resistant to moisture and aggressive chemicals. And if you want to comply with both points, then a tile will be an excellent option for you, the reliability of this material is undeniable, and a huge selection of tiles and a variety of textures, shapes and sizes will allow you to choose exactly what you need.

However, fixing ceramic tiles is possible only on a “stable” wall, and houses using log shrinkage technologies are not. There is a need to mount an additional frame for the interior decoration of the bathroom.

Inserting a beam for a frame into a wall

Shower cubicle with frame inset into the wall

We have already mentioned two types of frameworks used: independent and sliding. For their independent implementation, it is necessary to understand the design features. Another difficulty is the height of the shrinkage. If you plan to make the frame and trim yourself, then do not try to tile the bathroom to the ceiling.

It would be much more reasonable to raise it to a maximum of 2 meters, and leave the top wooden. This eliminates the need to take into account shrinkage.

An independent framework is easiest to implement in two ways. In the first case, if there is a base with a large bearing capacity, for example, one of the types of slab foundation and the first floor. In such a situation, it is easiest to make brickwork in the wet area of ​​\u200b\u200bthe bathroom. The main thing is to indent from the most protruding log (with a beam the situation is simpler) 3 – 5 centimeters.

If the floor is wooden, then it is better to mount a metal frame from a wall profile for drywall. The main thing is to ensure sufficient rigidity of the structure.

The sliding frame is attached to the wall, which is movable. It is necessary to maintain this mobility, but also to ensure a good pairing.

Consider the installation of a metal frame.

1. we mark the points of attachment of the profiles to the wall, then we make vertical cuts at the junction points.
   • the groove must be vertical in two planes
   • in width, the groove must include a profile, two layers of drywall or other sheet material on each side, for a log, ceramic tiles must also be included, but it is better to do this for timber; in addition, you need to leave gaps of 3-5 mm for free sliding.
2. profiles are fixed to the wall with hangers so that the profile slides without effort, but does not dangle freely.
3. if partitions are needed perpendicular to the main wall, then horizontal profile guides are laid on the floor, intermediate vertical wall profiles are set in increments of 60, preferably 40 centimeters, and fastened on top with a horizontal guide profile.
4. the frame is sewn with two layers of drywall, gypsum board or other material with overlapping seams;
5. After the partitions have been made, ceramic tiles are laid on them.

In log houses, carpenters prefer to make a frame from timber. For fastening to the wall in the latter, through longitudinal holes are made with a milling cutter, through which the beam is attached to the crowns with capercaillie screws with a washer, so that there is free vertical movement. If the house has just started shrinking, then the screw is fixed in the upper quarter, and if the installation is carried out after shrinkage, then in the center.

Moisture resistant sheet material is attached to the frame. Moisture-resistant drywall has a special priority. It is fixed in two layers – all this is done to increase the bearing capacity and for better reinforcement, both heat and vapor barrier. Even before laying the sheets of the second row, the joints of the first are puttied, and the GKL itself is placed in such a way that the seams of the two rows do not match.

However, GKL is an imperfect base, for the reason that both gypsum and cardboard are hygroscopic, and their ability to absorb moisture is reduced by impregnation. This means that for even greater reliability, moisture-resistant GKL is impregnated with an additional protective compound. An example is FLACHENDICHT (Flehendicht) – a waterproofing designed directly for waterproofing GVL and other gypsum bases.

It is also possible to use an aquapanel from Knauf. These panels are made according to the same principle as the gypsum board, only the core is cement with filler, and the “wrap” is fiberglass. Both aquapanels and GVL are not afraid of moisture, even without pre-treatment. Their difference lies in the fact that they are made perfectly even, without notches along the edges, which are present in the GKL. They are joined end-to-end, a specially designed adhesive composition is applied to the joined edges. At the end of the installation, the surface becomes even, and is ready to continue finishing. Even putty becomes redundant. It is worth noting that one side of the aquapanel is made even – for painting or wallpapering, and the second side is rough – for laying tiles.

And also as a base for tiles on the walls in a house made of timber or logs, it is possible to use moisture-resistant plywood. They are fastened similarly – to the frame. The gaps in the seams are left the same, in the future they are filled with silicone non-drying sealant.

The use of sliding frame bases for tiles allows you to get away from the need for a gap from the log house, where dust will accumulate. At the same time, for their independent implementation, a skill is needed so that everything turns out smoothly and accurately.

Bathroom in a private house – 105 photos of creating a style with your own hands

Bathroom in a private house: beautiful arrangement, best design and competent layout (105 photos)

Throughout the history of its development, a person unconsciously, and often consciously reaching for comfort. In Russia, we have an understanding that such comfort occurred only with the start of mass construction of comfortable housing in cities. The emergence of a free market for building materials made it possible to join the comfort of the numerous inhabitants of private houses in suburban towns, villages and villages.

In general, comfortable housing is housing in which the notorious amenities are located in a warm room inside the house, and not somewhere on the street in a wooden box. This is when in order to wash, you do not need to heat the bath, in winter it takes a whole day, so the bath in the village happens either on Sunday or on a big holiday, when in order to wash, you do not need to take absenteeism from work.

Today you can improve your home even in the most remote village. Moreover, true comfort these days is possible only in an individual private house built according to one’s own project.

As you know, our apartments are not very spacious, as for non-residential premises, such as: bathroom, toilet and kitchen, their area is so small that the owners have to show miracles of ingenuity in order to comfortably place in these premises everything without which they don’t make sense at all.

Table of contents of the article:

Bathroom on an individual project

Another thing is your house. The rules of modern bathroom design in the house say that bathrooms designed according to individual projects are not much different from a city apartment, except for more spacious rooms.

If the project of the house was created taking into account the wishes of its owner, then he can initially do everything in it exactly the way he wants and it will be convenient for him, and not for anyone at all.

If the living rooms in the house can be located anywhere, then the bathroom and kitchen should be located where it is most convenient to carry out engineering systems.

The construction of an individual sewerage system must be carried out taking into account the requirements of the SES, which states that the toilet should be located at a distance of no closer than 25 meters from a well or well. In reality, this rule is not always followed.

But even if, according to the project, the cesspool is located at a closer distance from the source of drinking water, you should not despair, it is enough to install a septic tank instead of a simple cesspool and the problem will be solved. The only thing to remember is the location of the septic tank, it must be installed in a place where a sewage truck can easily drive up to it.

The sewer pipe leading from the house to the septic tank must be large enough in diameter, at least 15-20 cm, and located at an acute angle so that sewage flows freely through it into the septic tank.

The pipe that has been brought out must be taken into a wooden or brick box, having previously wrapped it with a thick layer of mineral wool. Such a precaution will avoid freezing of the pipe in the winter.

Problems of arranging a bathroom in a private house

Having decided on the place of the sewer outlet, it will be possible to say quite definitely where the kitchen, bathroom and toilet will be located. All these rooms should be spacious enough, especially the bathroom. I must say that this is where all the advantages of an individual house in terms of arranging a bathroom end and problems begin.

Buying a city apartment, a person also buys a bathroom, albeit small and not very comfortable, but absolutely ready for use.

In your separate house, you have to deal with the arrangement of the bathroom yourself. Due to its very small size, the bathroom is perhaps the warmest room in the entire apartment.

How to deal with fungus in the bathroom

Designers initially plan the small size of the bathroom so that it best retains the heat generated not only by radiators, but also by hot water. Since the bathroom is used for taking water procedures, this room is almost constantly under the influence of moisture, which inevitably leads to the appearance of mold on the walls, floor and ceiling.

To prevent this, regularly ventilate the bathroom. Since the bathroom in a private house is created according to an individual project, unlike standard rooms of this type, you can well plan a window in it that can be opened to ventilate the bathroom and dry the room. In principle, you don’t need to make a window in the bathroom; it will be enough to cut an outlet in the ceiling.

If this is not enough, you can install an extractor in the bathroom by inserting it into the vent. The volume of the room in a standard bathroom is small and it heats up very quickly.

By wishing for a larger bathroom, we not only gain additional space, but also the additional problem of insulating and heating it. If the bathroom is not warm enough, then a cold is not far away.

Bathroom heaters

Materials such as mineral wool, polystyrene or cork can be used as insulation. The most preferred of all is mineral wool. It absorbs moisture well, so it must be covered with a layer of waterproofing before use.

Styrofoam holds heat very well, but is too brittle, so care must be taken when decorating walls and ceilings with it. Cork thermal insulation of the walls and ceiling in the bathroom is made by gluing cork plates.

Bathroom heating

Having allocated a large room for the bathroom, you must also take care of its additional heating. The best solution to this problem would be to install a double-circuit gas or electric boiler.

Double-circuit boiler is a combined water heater and heating system. A gas boiler in operation is much cheaper than an electric one and does not require any modifications to the gas supply system. However, despite the fact that our country is a gas giant, far from all our territories are gasified.

Wealthy citizens of our country living in these areas do not face the cost, prefer to install electric heating systems and not fiddle with solid fuel boilers that need to be cleaned daily before being fired.

Electric boiler is the most convenient of all. It turns on once in the fall, after which it can not be turned off until spring, only sometimes by adjusting the temperature of the coolant, that is, the water in the boiler. The electric boiler has its drawbacks.

A sufficiently powerful electric boiler, like an electric stove, requires connection to a three-phase network, which ordinary houses are not provided with, in addition, electricity is the most expensive form of energy.

However, no matter how hard we try to heat the bathroom, the floor in the bathroom of a private house, if it is not specifically insulated, will still remain cold. In order to insulate the floor, polystyrene is often used, which serves as a good thermal insulator. Today, the so-called warm floors are gaining more and more popularity.

Underfloor heating

Underfloor heating is such because it is artificially heated by electrical thermoelements woven into the grid. The mesh is flexible and easy to cut. The element woven into it is a tubular flexible electric heater stretched over the area of ​​the entire grid.

In contrast to the thermocouple, the mesh can be cut and bent over the entire floor area, after the warm floor is laid, it is connected to the mains. Laminate slabs, linoleum, parquet or any other coating are laid on top of the warm floor.

Choice of sanitary ware for the bathroom

Once the flooring is done, it’s time to think about installing the bathtub. Multiple photos of bathrooms in private houses eloquently indicate that the non-standard bathroom in a private house is almost always much larger than the area of ​​a standard bathroom in a city apartment, and the plumbing installed in it can also be much larger than usual.

It is unlikely that anyone would install a sitz bath in the bathroom of their own home. People build their own houses in the suburbs not to arrange a corner of Soviet life in them, but, for example, to make a bathroom in a private house, turning it into a relaxation room and soak up the jacuzzi.