Best tiles for bathroom floor: The 7 Best Tile Options for the Bathroom Floor
The 7 Best Tile Options for the Bathroom Floor
Photo: istockphoto.com
Bathroom floor tile is available in a surprising number of materials. Ceramic, porcelain, and vinyl tiles often come to mind first, and for good reason: They’re perhaps the most practical selections on the market. But there are many options available today, from stone to cork.
It’s most important to select a flooring material that, first, prevents moisture from seeping below the surface and causing damage and, second, won’t be so slick when wet that it poses a safety issue. After that, the final selection generally comes down to a balancing act of style and budget. Get to know all of your options with this guide to the best tile for bathroom floor, and your decision-making will come with a bit more ease.
Photo: istockphoto.com
1. Vinyl Tiles
Vinyl is the most popular bathroom flooring material because of its low cost and high degree of practicality. It is well-suited for every bathroom in the house, from the master bath to the powder room. Hands down, it beats other popular choices for safety, comfort, and durability. Almost as important, the top manufacturers of vinyl tiles have come a long way in aesthetic appeal and ease of installation. The material is self-adhering and can be cut with a simple utility knife.
Prices start at $2.50 per square foot.
Photo: istockphoto.com
2. Ceramic and Porcelain Tiles
Whether your tastes run to stone or wood lookalikes, colorful penny tiles, or lattice-patterned squares, you’re likely to find that the offerings of ceramic and porcelain tile are some of the best in bathroom floor tile. Like vinyl, ceramics score high with regard to maintenance, too, but they are not nearly as comfortable to the bare foot. Installing radiant floor heat helps to change that, but a hard surface is hard whether or not it’s warm. Ceramics are not as easy to install as vinyl, though it is a job the adventurous do-it-yourselfer can tackle. When protected with a high-grade glaze, ceramic will resist wear and scratches.
Porcelain tiles are harder than clay-based tiles and may have through-body color, an advantage if chipping occurs.
Note: When buying ceramic or porcelain tile, be sure it’s rated for use on floors.
- Choose ceramic tile with a grade of 1 or 2 for floors. Ceramic tile also comes with a coefficient of friction (COF). To prevent slips in this wet room, choose one rated .50 or greater.
- The Porcelain Enamel Institute (PEI) rating system counts the other way; opt for tiles that are at least PEI III.
Prices start at around $0.50 per square foot for ceramic and $3 per square foot for porcelain.
Consult a flooring expert
Find licensed flooring experts in your area and get free, no-commitment estimates for your project.
Find local pros
+
Photo: istockphoto.com
3. Glass Tiles
The aesthetic appeal of a glass floor tile is twofold: Covering part of the floor in a thin layer of glass creates the illusion of depth and, if tinted, a lovely stained-glass effect.
Installed properly, this type of tile holds up well—just be sure to select floor-rated tile and textured glass to prevent slips. Small glass tiles with lots of grout joints are also slip-resistant. With these tips in mind, consider customizing a shower floor (perhaps even up the sides) with tiny glass tile squares to create a showy feature in the bathroom.
Prices start at around $5 per square foot.
Photo: istockphoto.com
4. Stone Tiles
Stone tiles were once confined to the foyer. In the past couple of decades, however, they have gained popularity in other rooms as well, bathroom included. Made from limestone, marble, granite, and slate, stone tiles are available in colors that range from creams to blues, reds, greens, and golds. Available textures are nearly as numerous and include cleft, tumbled, sandblasted, etched, and flamed variations.
Stone is typically more expensive than similar-looking ceramic or porcelain tiles.
Plus, naturally porous stone requires more maintenance than ceramic tile; regular cleaning and sealing are recommended. (See our recommendations for the best granite sealers and marble sealers to preserve your investments.)
Prices vary.
Photo: istockphoto.com
5. Plastic Laminate Tiles
Plastic laminate tiles (more commonly available as planks) are also a good choice, especially if you’re remodeling. Similar to the laminate material that covered kitchen countertops for a generation or two, the tiles don’t significantly raise the height of the existing floor, which makes it easier to plan transitions from room to room.
While durable and easy to keep clean, laminate falls short when it comes to moisture. Standing water can infiltrate the fiberboard core, causing the material to expand and buckle, which makes it one tile that might work better in a half-bath than a full-bath. With laminates, it’s critical to caulk gaps along the walls, around the toilet, and (if in a full-bathroom) the tub to prevent water infiltration.
Another con: Laminates don’t come in quite the same variety of styles you’ll find with ceramics and vinyl.
Prices start at $1 per square foot.
Photo: istockphoto.com
6. Linoleum Floor Tiles
Linoleum is made of linseed oil, cork powder, wood flour, ground limestone, and pigments. It is at home in contemporary or retro settings and well-suited to the bathroom. It’s touted as naturally inhibiting the growth of microorganisms and being able to repel dust and dirt, all while retaining its color. Click-in-place plank designs make it easy to install, and there is no doubt that the stuff looks great. The look comes at a cost, however, as linoleum is relatively expensive.
Prices start at $3.50 per square foot.
Photo: istockphoto.com
7. Cork Tiles
Cork flooring is warm to the touch and very easy on the feet, and the tiles come tinted in a variety of colors. Glue-down installation is not difficult, but expect to apply multiple coats of polyurethane to seal the flooring and prevent moisture from reaching the subfloor, even if you purchase finished tiles.
Generally, cork tiles are installed with a troweled-on adhesive, but click-in-place floating floor products are also available.
Prices start at $3 per square foot.
Consult a flooring expert
Find licensed flooring experts in your area and get free, no-commitment estimates for your project.
Find local pros
+
9 Best Types of Tile for Bathroom Floors
9 Best Types of Tile for Bathroom Floors
Updated December 22, 2021
Photo: PC Photography / iStock / Getty Images Plus / Getty Images
Picking the correct type of bathroom floor tile means you can show off your style while still being practical
Get quotes from up to 3 pros!
Enter a zip below and get matched to top-rated pros near you.
Choosing the best tile for you is one of the most important parts in the process of remodeling your bathroom floor. There are so many tile types available, and it takes a lot of time to decide which ones best meet your needs.
Luckily, with a little know-how, picking the right tile can be easy and even fun. Let’s explore some of the best types of tiles that you can use for your bathroom floor.
1. Ceramic Tile is Durable and Easy to Clean
Ceramic tile is one of the best types to use in a bathroom. It’s durable, easy to clean, and comes in lots of available styles that fit your home’s design. Plus, ceramic tiles can be easy to work with, too.
There are so many advantages to using ceramic tiles on your flooring or walls. First, they’re very affordable, averaging 49 cents per square foot and up. They come in tons of colors and patterns that will make any room look its best. You can find all sorts of shapes like rectangles, hexagons, and even flower squares for different designs.
These tiles are perfect for bathrooms because they resist moisture and won’t absorb odors or bacteria, which means less dirt buildup over time (which will come in handy when it’s time to disinfect your bathroom).
This type of tile is best for bathrooms because it’s water-resistant, so there won’t be any problems with humidity or moisture.
Pro Tip for Making Ceramic Tiles Last
If you use a high-grade glaze, ceramic tiles will resist wear and scratches. Ceramic tiles can also withstand wear and tear, say from children who might accidentally drop something on the floor while playing in the bathroom. Since ceramic is durable and easy to clean, it’s perfect for any flooring you want to last.
2. Porcelain Tiles are More Stain-Resistant
Porcelain tiles are more resistant to stains than ceramic tiles. However, they can be slippery when wet, making for a potentially unsafe bathroom floor, so be sure to use a mat or rug near the toilet and shower.
While these tiles are beautiful, they also tend to crack as they age. Anyone drilling holes to install porcelain tiles should be aware of this.
Use Tile Adhesive When Installing Porcelain Tiles
One concern with porcelain tiles is how best to use tile adhesive.
Tiles are fragile and need a secure surface to stay intact. This type can be difficult to install when working with porous surfaces like concrete or plasterboard.
A way to solve this problem is by using a “silicone waterless” sealant on the back of each tile before laying them down. A sealant will help create a tight bond that won’t let go no matter what.
3. Stone or Natural Stone Is Good for the Allergy-Prone
Stone or natural stone flooring is an excellent choice for people with allergies due to its non-porous texture, which won’t hold onto dust and particles. Natural stones also tend to absorb allergens more quickly than other types of floors do.
Do you want an excellent alternative for hard-wearing, non-porous flooring that can withstand a high level of humidity? Natural stone tiles are a perfect choice.
Natural stones such as granite or marble look beautiful with any theme. They even offer a fantastic surface quality which makes them easy to clean without worrying about scratching.
Another benefit is how quiet footsteps are due to their lack of cracks.
Also the Best Flooring to Withstand High Humidity Levels
The best tile for those who want a quiet surface that’s easy to clean without worrying about scratching is natural stone.
The best stone tiles for bathrooms are hard-wearing types with tiny cracks or joints. Mohawk, travertine, and sandstone are all-natural stones that make up this category.
Photo: hikesterson / iStock / Getty Images Plus / Getty Images
4. Vinyl Tile Is Stylish and Inexpensive
If you’re looking for a bathroom flooring material that’s affordable and easy to install, vinyl tile is the way to go. Vinyl tile relies on low-cost materials. They also deliver high degrees of practicality. In addition, its waterproof resilience and comfortable surface make vinyl tile an easy bathroom flooring choice for families.
For this reason, it’s become popular in many households. You can install vinyl throughout bathrooms of different shapes, from the main bath to your powder room.
Bathrooms are filled with water, which can lead to leaks and splashes, making vinyl a good choice. Vinyl has excellent safety advantages like being less slip-prone and incredible durability. Through the years, this material has come a long way aesthetically and with ease of installation.
5. Linoleum Tiles Are Better for the Environment
Linoleum tiles offer an environmentally friendly option for bathroom floors. It’s all thanks to recycled materials like linseed oil, cork powder, wood flour, ground limestone, and pigments.
This material also has many advantages that make it worth consideration for flooring in a bathroom. It is inexpensive, naturally inhibits the growth of microorganisms, and holds up well to dirt and grease.
It’s a more expensive option. However, linoleum looks excellent in all types of settings, like newly renovated bathrooms or retro-style bathrooms.
6. Glass Tiles Are Good for Depth and Aesthetics
The sleek look of glass tile flooring is appealing because it creates the illusion of depth and, if tinted, has a stained-glass effect.
These tiles are durable and can stand up to a lot if you install them correctly. Make sure you select a textured glass to prevent slips. Consider using small glass tiles with lots of grout joints to create a slip-resistant shower floor with these tips in mind. You could also use a local bathroom tile installation pro, who will install your tiles without costly mistakes.
7. Laminate Floor Tiles Are Inexpensive But Risky
Photo: essential image / Adobe Stock
Plastic laminate tiles are an inexpensive and good choice for projects in small bathrooms. Laminate is durable and easy to keep clean, but it doesn’t do well with moisture, so it’s best for a half bathroom.
When installing laminates, caulk all spaces around the toilet and tub base and gaps along walls.
8. Wood Flooring Is Rich But Requires Major Upkeep
Many people choose the warm and cozy appearance of wood flooring. While a stylish choice, wood flooring requires regular upkeep like refinishing or sanding.
Wood isn’t typically a viable flooring option for bathrooms, but engineered wood is. Engineered wood features a plywood base that holds up well against moisture. If you want to include wood in your bathroom, this is the best type to use because it looks like natural hardwood and has the added benefit of being waterproof.
9. Cork Flooring Is Popular for a Creative Look
Cork flooring is an excellent choice for those looking for style and comfort while walking barefoot. The tiles come in multiple colors and are easy to install. First, though, you’ll need to seal them with polyurethane since they can absorb moisture through the subfloor.
Using cork is a good idea when you are doing a half-bath because these rooms tend to accumulate less moisture. Otherwise, you might spend more time replacing this type of flooring than it’s worth.
Generally, pros will install cork tiles with a troweled-on adhesive. However, these days, click-in-place floating floor products are also available.
Need professional help with your project?
Get quotes from top-rated pros.
Learn more about our contributor
A former real estate agent and a daughter of landlords, Stephanie knows what it takes to get the home from drab to rehab. She now offers her know-how of everything from redecorating to home insurance to friends and family. She’s even written real estate and insurance guidance on online resources like Insurify.com. Stephanie’s hobbies include crafting everything under the sun on her Cricut machine, redecorating her home, and racing RC cars with her fiancé.
Recommended Articles
-
The Best Types of Attic Flooring
By Kristin Salaky • August 8, 2022
-
7 Common Carpet Cleaning Mistakes to Avoid
By Meg Scanlon • December 8, 2021
-
The Pros and Cons of Choosing Ceramic Tile for Your Floors
By Nick P. Cellucci • October 19, 2021
Which floor tiles are better: the best advice
One of the important points of any repair is the choice of floor tiles.
It is important to make the right choice, because the complexity of the repair itself and the appearance of the final result depend on it. And in order not to make a mistake in choosing, you need to know certain subtleties, knowing which you can choose the perfect floor tiles that will delight you for many years after the repair is completed.
When choosing, it is better to opt for tiles from European manufacturers. Over the years, they have managed to establish the production of ideal flooring. Spanish, Italian, Czech and Polish tiles are available in abundance in local shops and ceramic tile showrooms in Kaliningrad. This tile meets all possible quality standards.
Tips for choosing tiles
First of all, you need to understand that the cost of a good tile cannot be less than $ 10-15 per square meter. The cheapest options will not meet the requirements for floor tiles, and can also create some difficulties when laying them.
Almost every tile collection has several versions – light and dark colors, as well as a certain set of decors.
On the floor and bottom of the bathroom, it is better to choose dark tiles, this is more practical.
It is better to choose glossy tiles for walls and matt tiles for floors. Otherwise, glossy floor tiles will lose their original appearance very quickly.
Decor should be used sparingly and correctly, ideally it is better to entrust the creation of a design project to a professional. The designer will create the right combination of tile colors and decor. It is not customary to use borders in small bathrooms.
Selecting the right tile grout is also important. It must be selected not only by color, but also by the future purpose of the room. Ideally, its color should match the color of the tile, but it is allowed to choose a grout two or three shades lighter.
Before buying a tile, it is recommended to study the main qualitative characteristics of the chosen ceramic tile: wear resistance, porosity, frost resistance, tensile strength, surface hardness, chemical resistance, coefficient of friction, tone and caliber.
Characteristics affect the type of room in which the tile will be used. For example, tiles for the bathroom and for the hallway need to be chosen with different properties.
Using these simple rules, you can choose a great option for wall and floor tiles.
Tile color and shape
Today, professionals recommend using large floor tiles – they are at the peak of popularity. A small tile, on the contrary, has lost its relevance in modern interiors. Beautiful, durable modern – all these are large-format tiles that fit perfectly into the interior of any room. The large size of the tiles will allow you to achieve a really spectacular appearance on the floor, especially if you lay them diagonally.
Almost all ceramic tile manufacturers have studied the preferences of their customers and today can offer a variety of colors. It is recommended to give preference to warm and soothing tones of tiles. Also today, floor coverings with imitation of various materials are very popular, for example, wood-like or concrete-like tiles.
White tiles better hide water splashes and grime on the walls. Dark tiles will need to be looked after more often, rubbed and processed. The most practical color for bathroom tiles is grey. With the right selection and combination with another color, it can show a very beautiful result.
Tile color recommendation:
- Dark-colored tiles are not suitable for small rooms – a small space will narrow even more.
- The use of inserts or panels of decorative tiles will visually enlarge the bathroom.
- Light and neutral colors are great for both small and spacious rooms.
- Dark and shiny finishes will give elegance and nobility, but in small bathrooms it should be kept to a minimum.
Benefits of floor tiles
Floor tiles not only look great and complement the design of the entire interior, but are also easy to clean and are very durable. That is why tiles take pride of place in the top of the best flooring.
In the home, floor tiles are typically used in areas with damp environments such as bathrooms, toilets or kitchens. The tile does not allow moisture to pass through, and when using the correct grout, the seams will also be protected from water penetration. And with proper cleaning – fungus and mold do not form on the tile.
Floor tiles can be cleaned by vacuuming and wiping with a damp cloth. You can also use special cleaners. And to give the tile an extraordinary shine and shine, use warm water with a small amount of ammonia to wash it.
Tiles are one of the most durable floor coverings. Its service life can reach both 30 and 40 years. No other coating can boast similar results. Therefore, if you choose tiles for a long time, it is better to choose a reliable manufacturer, for example, Italian or Spanish tiles. Porcelain stoneware has the maximum service life, it can last all 50 years.
Bathroom and toilet floor tiles
Every bathroom is tiled, including the floor.:strip_icc()/walk-in-two-person-shower-1eb6eb3d-e29bf54ec86c493fb70e5309ad38f7ad.jpg)
Since the tile well prevents the penetration of moisture, the formation of mold, and it is also easy to clean. It is these requirements that are basic for finishing the bathroom. After all, the increased humidity of this room requires a reliable coating.
Since different cleaning and chemical products are used in the bathroom, the tiles should also be used with high moisture and acid resistance.
It is recommended to lay porcelain stoneware instead of ceramic tiles on the floor. It’s more practical, and more reliable for that. In appearance, it most often imitates natural materials: stone, wood, concrete, etc.
But if porcelain tile doesn’t suit the style or budget of your bathroom, you can of course use ceramic tile. But it is important that it is designed for use on the floor. Larger ceramic tiles are usually laid on the floor than on the walls. This is largely due to the ease of cleaning, when dirt can clog into the numerous joints between small floor tiles, which is quite difficult to deal with.
Kitchen floor tiles
The range of ceramic tiles is getting bigger and bigger every time, which is why the choice of tiles for the kitchen becomes more relevant than ever. There are more and more types, textures, colors and sizes of tiles and, accordingly, the choice becomes more and more difficult.
A classic solution for kitchen flooring is ceramic tiles. It is easy to install, affordable and easy to clean. It is reliable and resistant to damage that can happen in the kitchen. For example, hot water can spill onto the floor, heavy appliances can fall, and heavy kitchen appliances are constantly standing on it. That is why the requirements for mechanical, chemical performance and water repellency of tiles are especially high.
Floor tiles for the kitchen can be very original, but the prices remain quite affordable and affordable. Just when choosing, use worthy offers from leading tile manufacturers. There are many options, the main thing is to take into account the tips indicated in this article, and you will be able to choose the perfect option for floor tiles.
Often in the kitchen I use tiles imitating various natural materials – wood, marble, stone or concrete. Such tiles will make the flooring of the kitchen more expensive and presentable.
Interior tiles
Tiles are also increasingly being used to decorate other areas of the home, such as the living room or bedroom. You can create a really beautiful interior with tiles that will look rich and modern. Just do not forget about a variety of decorative elements, panels, extensions, a variety of styling options.
When decorating house floors with tiles, the “Warm floor” system is often used, which is able to maintain heat even without additional heating radiators .
For the bedroom, tiles of I and II classes of abrasion are usually used, because traffic here is very low. In the living room and hall, the load on the floor is more significant, especially where there is a dining table, cabinets and sofas. Here, a combination of different classes of tile abrasion from II to IV is justified.
Floor tiles in the corridor or hallway
Floor tiles for flooring should be selected taking into account the requirements for the material, depending on the purpose of the room. In the hallway there is a large accumulation of dirt and sand, so the tile must be resistant to such mechanical damage. Due to the high permeability, the coating must also be resistant to loading and abrasion. The more dirt on the soles of the shoes, the faster the flooring in the corridor will lose its appearance. It is better to use tiles of III and IV class of abrasion for the hallway.
Porcelain stoneware is also often used in such rooms. It does not have microcracks and pores, and this provides it with higher wear and water resistance in comparison with tiles.
Basic properties that a hallway floor tile should have:
- Abrasion resistance
- Mechanical resistance
- Moisture resistant
- Non slip surface
Tiles of classes A and AA meet all these requirements.
It is also important that the tile is resistant to moisture penetration. In addition, the tiles must match the interior design in terms of color and style of the room. In this regard, large-sized tiles for the floor in the hallway are the best option.
Designer, large size tiles can visually enlarge a small hallway or hallway. To do this, use light-colored tiles with a smooth surface. Dark-colored tiles, on the contrary, will visually reduce the room. Also on the black color, scratches and chips will be clearly visible, which may appear over time. You can also use relief tiles, it can also give the room additional volume.
Floor tiles must match the walls
For laying on the walls in the bathroom and toilet, matte, glossy or glazed is chosen, and the decor for it is curbs, piece or assembled in panels. The vertical arrangement of ornaments allows you to visually enlarge even very small spaces.
In recent years, tiles imitating various natural materials have become especially popular – imitating stone, wood, metal and vegetable fibers.
A tile with such a texture will go well with almost any decoration of neighboring rooms. To finish the floor, use non-slip, high-porosity tiles of abrasion class I or II.
How to care for your floor tiles
Tiles need regular maintenance to keep them shiny. In case of heavy soiling, it is recommended to use special cleaning agents with the addition of technical alcohol. To achieve cleanliness of floor tiles, it is enough to vacuum and wipe with a damp cloth. You can also use special cleaners. And to give the tile an extraordinary shine and shine, use warm water with a small amount of ammonia to wash it.
There are also some folk recommendations for tile care, for example, potato decoction or starch will do a great job of cleaning tiles. And after each cleaning procedure, you can apply a thin layer of linseed oil or a special cream, thanks to which the tiles will retain their original appearance longer.
Conclusion
With these simple tips from the pros, you’ll be able to find the perfect ceramic floor for your home.
Applying proven schemes and supplementing them with your own ideas, you can make your dream bathroom a reality.
And after you decide on the type and type of tile, it remains to calculate the required number. To do this, you need to know only the area of \u200b\u200bthe room. It is only important to take into account that diagonal laying will require 10-15% more material than conventional laying. There, the error due to fitting rarely exceeds 5%.
How to choose floor tiles in 2023: expert advice
Laminate, parquet, carpet, linoleum – all these floor coverings can have a lot of advantages, but sometimes their use is absolutely unacceptable due to special requirements for strength and durability . In such situations, their replacement is tiles intended for laying on the floor! It is strong, wear-resistant, does not need complex care, and is attractive in appearance. It is only important to clarify how to choose and buy floor tiles in accordance with all the rules .
..
Contents
- Basic parameters for choosing the right floor tiles
- Floor tile wear classes
- What material is better for floor tiles
- We select the size of floor tiles
- Color and tone
- What is the grade and lot of floor tiles?
- Recommended floor tile manufacturers
Basic parameters for choosing the right floor tiles
To ensure that buying a similar floor covering does not disappoint you after a few years, you need to pay attention to a number of key characteristics.
Floor tile abrasion ratings
Abrasion resistance is the most important property of a floor tile. To measure it, a special device is used with an abrasive rotating circle: it touches the tile and spins. The more revolutions the coating withstands before wear, the higher the class.
It is designated by the PEI index and numbers:
- Class I . Minimum wear resistance, traces of abrasion appear already in the region of 150 revolutions of the disc. Since they often try to choose tiles for the floor for years to come, such a “soft” coating can only be laid in the bathroom and pantry; in more “passable” rooms, it will quickly become unusable.
- II class . A slightly stronger tile that can withstand up to 500 revolutions without damage. It is already possible to walk on it in slippers, although the scope of use is limited to rooms with little traffic: a bedroom, a nursery, an office, as well as all the same toilet and utility rooms.
- Class III . This is the best choice of floor tiles for living rooms – it does not wear off even from 1200-1500 revolutions of the abrasive wheel. The only limitation: in the kitchen, corridor and hallway, this coating would be appropriate if the family is small and the movement around the apartment is not strong.
- IV class . According to the PEI standard, such tiles will withstand more than 1500 revolutions, due to which they will cope with any non-commercial load: from bedrooms to kitchens with halls. It can also be used in small offices, cafes and shops, mini-hotels, receptions, etc.
- V class . The highest level of wear resistance for floor tiles – with it, the coating on the tests is not damaged after several thousand revolutions of the disc! Therefore, such tiles can be laid on the floor in supermarkets, cinemas, large business centers, and train stations.
What to look for when buying floor tiles, in addition to wear resistance, is moisture absorption. It is measured in 3 categories. The first absorbs no more than 3% moisture, the second up to 10%, and the third – over 10%.
That is why the latter is afraid of frost and is suitable exclusively for enclosed spaces, while the first and second are frost-resistant: they can be placed on balconies, terraces, and by pools. As for the thickness, take this parameter indirectly – most floor tiles are made from 7-9mm, which is enough.
What material is the floor tile best for
what is the coating done. The most common options are:
- Traditional ceramics : the advantages of the tile include accessibility and a large selection of decor (for example, it can be covered with colored glaze), and the disadvantages are not the most serious durability.
- Stone / stone chips : these tiles are durable, environmentally friendly and very cold at the same time – even in summer walking barefoot on them can be not very comfortable for your feet.
- Porcelain stoneware : wear-resistant, but also warmer coating (underfloor heating can be installed under it!), Its disadvantages include a limited range in the field of design.
- Clinker : exceptionally strong and durable, fired at a high temperature without artificial impurities, with a modest color palette. How to choose the right clinker tiles, read in a separate article.
- PVC : Made from vinyl and sometimes quartz sand added, the tile is warm, water and shock resistant, offers a limitless choice of patterns and is easy to install, but has a lower lifespan than others.
Structural (or embossed) looks very unusual, but cleaning it will take a lot of time and effort. By the way, if you want to be completely safe, look for a tile with an anti-slip index (indicated by the letter R) of at least 9-th level.
Selecting the size of floor tiles
The choice of tiles for the floor in size is huge: on sale you can find ceramics and 5×5 cm, and 120×120 cm! However, there is no single correct solution here, much depends on the room where the coating is planned to be laid. Special large models can add solidity and solidity to a room, but only if it is also the largest – with an area of 7-8 square meters. And if you are interested in what size of floor tiles it is better to choose for a small bathroom or a narrow corridor, it is better to purchase small elegant ceramics – all the more so there are fewer trimmings with it (which means lower consumption). Try to find a harmonious balance!
You should rely on your specific wishes for the design of the room: make the floor match the walls, ceiling, furniture and interior doors, or accentuate it with contrast. It is only important to remember a few standard recommendations:
- light floors visually expand the space, which is especially important for cramped hallways and corridors;
- dark tiles on the floor “warm up” the room, making it cozier and stricter – but dirt and dust are more noticeable on it;
- bright, juicy shades attract attention, but can be tiring and at the same time “get lost” in a dimly lit room;
- natural “ceramic” colors are ideal for classic style, they never lose their relevance;
- a pronounced pattern (wood effect, national motifs, etc.) is interesting, but should not be “mixed” with the wallpaper or the front of the kitchen.
What is the type and batch of floor tiles?
If you want to know how to choose the right quality floor tiles, look at their packaging to find the grade label.
It comes in three types:
- 1st grade . The best performance – for such ceramics, a marriage of no more than 5% is allowed. This coating is easily identified by the red mark on its label. The price of such a tile is appropriate.
- 2nd grade . The frequency of marriage for the second grade (it is indicated in blue) is similar to the first, but the tolerance for the apparent size of the defect is higher – chips and uneven coloring are more common here.
- 3rd grade . The tiles recognizable by the green marking are the cheapest, but 15% of them have cracks, size mismatch, etc. But for a pantry or a balcony, such a coating will do.
Separately, it is necessary to clarify the concept of a batch.
Even for eminent manufacturers, when firing ceramics, slight changes in the technical process are possible, due to which the tile of the same model may slightly differ in hue and saturation. In this case, it is necessary to order the entire amount of coverage at once, since it will simply not be possible to choose floor tiles of the same color later.
Recommended manufacturers of floor tiles
The choice of floor tiles on the market is simply eye-opening, dozens of brands are represented in our catalog! True, not all of them are comparable in quality to their products. Therefore, it is worth choosing tiles for the floor from trusted companies. These primarily include brands such as Paradyz, My Way Paradyz, Kwadro, Newker, Pamesa, Equipe, Grespania, Ragno, Keraben, Atrium and Saloni.
-
tile Paradyz Intero 59,8×119,8 beige
Price
1622. 00 -
tile Paradyz Bazo 30×30 nero
Price
946.00 -
tile Paradyz Ermo 40×40 bianco
Price
510.00 -
tile Paradyz Desertdust 59,8×59,8 taupe rect struktura
Price
822.00
00 -
tile Kwadro Rufus 40×40 Brown
Price
560.00 -
tile Classica Paradyz Sohn 40×40 brown
Price
448.00 -
tile Classica Paradyz Sextans 40×40 brown
Price
560.00 -
tile Classica Paradyz Sextans 40×40 graffiti
Price
560.00
-
mosaic Stargres 28,3×40,8 timber heksagon
Price
286. 00 -
tile Stargres Cava 20×120 almond rett
Price
977.00 -
tile Stargres Tribeca 60×60 rett
Price
762.00 -
tile Stargres Eco Wood 30×120 natural rett
Price
935.00
00 -
tile Pamesa Fronda 20×60 arce
Price
924.00 -
tile Equipe Caprice 20×20 gray
Price
2101.00 -
tile Equipe Caprice Loire 20×20
Price
1005.00 -
Equipe Caprice Provence 20×20
Price
2526.00 -
Equipe Hexatile Mate 17,5×20 negro
Price
2407.00 -
Equipe Octagon Marmol 20×20 negro
Price
2280.00 -
tile Pamesa Style 60х60 perla
Price
1266. 00 -
tile Pamesa Cr Ardesia 60×120 noir
Price
1998.00 -
tile Pamesa Cr Karelia 20×120 mocha
Price
1517.00
00 -
tile Ragno Bistrot Decoro 21×18,2 piatrasanta
Price
2530.00 -
tile Ragno Woodessense 10×70 beige
Price
1791.00 -
tile Ragno Rewind 60×60 tabacco
Price
2158.00 -
tile Ragno Bistrot Soft 75×75 calacatta michelangelo
Price
2865.00 -
tile Atrium Viggo 20×120 roble
Price
1249.00 -
tile Atrium Viggo 20×120 fresno
Price
1670.00 -
tile Atrium Naza 60×120 taupe
Price
2133.00 -
tile Atrium Entis 60,8×60,8 gris mate
Price
1787. 00 -
tile Ragno Woodstory 15×90 grigio (R5Qv)
Price
1840.00
00 If you do not want to figure out how to choose the right floor tiles, just ask for help from consultants in the Keramis online store. Thanks to their knowledge and experience, they will tell you what to look for and what size and color of tiles to choose for your specific situation. And most importantly: our prices will delight you!
More news
All news…
Keramis, together with the famous German sanitary ware brand Grohe, starts a hot draw of the novelty of 2023 on our official Instagram page
July 17, 2023
Today, 06/28/2023, we celebrate the Constitution Day, an important holiday symbolizing the foundation of our statehood and legal system
June 28, 2023
Our doors are open for customers:
Monday – Friday, 09:00 to 18:00
June 1, 2023
We appreciate each of you and try to meet your expectations.