How to get rid of mold in bathrooms: How to Remove Bathroom Mold: 15 Steps (with Pictures)

alexxlab

How To Prevent & Get Rid Of Mould In The Bathroom by Mira Showers

How To Prevent & Get Rid Of Mould In The Bathroom by Mira Showers









  • +Add a
    product



  • +Add a
    product



  • +Add a
    product



  • +Add a
    product


Compare

Close


Close

Add to presenter





Create a new presenter



Go To Presenter



Blog

The bathroom is often the most humid room in the house, potentially causing mould and mildew to appear.

Mould not only looks unsightly, but can be dangerous to your health if left untreated for long periods. So how can you remove and prevent mould in the bathroom? Let’s find out.

Common causes of bathroom mould

Mould thrives in dark and warm conditions, so it’s no wonder that bathrooms are so susceptible to this unwelcome house guest. Here are the most common causes for mould in your bathroom:  

  • Lingering moisture caused by lack of ventilation 
  • Leaky pipes, taps and toilets seeping into plasterboard and wood 
  • Damp cellulose materials such as grout, plasterboard and fabric provide the ideal breeding ground for bathroom mould 

How to prevent mould in the bathroom

You can take a few simple precautions to stop mould from appearing in the bathroom. While these suggestions aren’t guaranteed to eradicate existing mould, they may help prevent mould from appearing in the future.  

Open the window after a shower  

Opening the window in your bathroom after you’ve had a shower will allow any excess moisture in the air to disperse naturally. Good ventilation can reduce the chance of condensation settling on the walls, ceiling, or around the windows, which can eventually cause mould.  

 If you don’t have any windows in your bathroom, consider investing in a ventilator fan or dehumidifier. This will have a similar effect to an open window, getting rid of excess humidity in the air after your shower.  

Wipe around the shower  

To help stop mould setting into your shower, wipe down the area (including shower trays and wall panels) to remove any excess condensation that could turn into mould.  

Add purifying plants 

Some house plants can lower the humidity in the air, which can help break down existing mould and prevent more developing. Invest in one of these plants to improve air quality and reduce humidity in your bathroom:  

  • English Ivy: English Ivy is a great choice for smaller bathrooms, as it can remove airborne mould from humid spaces. Plant it in a hanging pot or place it on top of a cabinet if you’re short on space. 
  • Peace Lily: These purifying plants need very little sunlight to survive, so they’re an excellent choice for bathrooms without windows. However, peace lilies can be toxic to animals if consumed, so keep them out of reach from pets. 
  • Boston Fern: Another great choice for humid bathrooms, the Boston Fern is an attractive, evergreen plant that thrives in indirect sunlight and moist soil.   
  • Reed Palms: Found in some of the most tropical regions on earth, palms can keep humidity at bay in your bathroom by absorbing moisture through their leaves. Unlike other palms, the Reed Palm can survive in low light, so it’s perfect for keeping inside the home.  
  • Tillandsia: If your bathroom has a bright window, this is the damp-eating plant for you. Tillandsia plants thrive in filtered sunlight and absorb moisture through their leaves, so they’re great for combatting persistent humidity problems in the home. 

 

Stick to a regular cleaning routine  

Without a regular bathroom cleaning routine, bacteria, limescale and mould can become a real problem. Clean and dry your bathroom regularly, including grout and hard-to-reach corners that are prone to mould.   

Wash your towels and bathmats frequently, and hang wet towels and bathmats in dry, well-ventilated areas.  

To further aid ease of cleaning and maintenance, our Mira Wall Panel and Shower Tray ranges feature BioCote® technology to reduce bacteria and mould growth by up to 99.9%. 

 

How to get rid of mould in the bathroom

Getting rid of mould in the bathroom is notoriously tricky, especially if you don’t want to use harsh chemicals. Firstly, you should identify what kind of mould you have, then assess how severe the problem is. This will help you choose the right products to remove bathroom mould effectively.  

 Black mould is one of the most common bathroom moulds and is usually the hardest to eradicate. It often appears in spots or clusters and can give off a musty smell.  

 Although unsightly, black mould is no more dangerous to your health than other types of mould unless you are allergic or asthmatic. Regardless of this, you should always wear rubber gloves and a face mask when tackling any mould in the home.  

  

How to stop black mould in the bathroom

You can keep your bathroom mould-free by following preventative measures such as good ventilation, regular cleaning and introducing purifying plants to your space. But when black mould has already set in, there are a few things you can try to remove it: 

 

  • Undiluted white vinegar is a simple and affordable home remedy for black mould. Pour vinegar directly onto the affected area or use a spray bottle to apply as soon as you notice black mould forming. However, vinegar isn’t as strong as bleach or specialist mould remover products, so it might not banish stubborn black mould areas. 
  • Wondering how to remove black mould from silicone sealant or grout? Apply bleach to a cloth or old toothbrush and scrub these hard-to-reach areas. Be sure to wear rubber gloves and keep the bathroom well ventilated when using bleach. 
  • If the first two methods haven’t worked, buy a specialist bathroom mould remover. These products contain strong chemicals, so it’s important to wear a face mask and keep a window open to avoid breathing in any harmful fumes. We strongly recommend wearing rubber gloves throughout the entire cleaning process to protect your hands. 

 

If you opt for a specialist mould remover, take the following steps to remove mould from your bathroom safely and effectively:  

  1. Test the product in a small area first.
  2. Apply the mould remover as directed on the bottle. Many products need to be left for a certain amount of time to achieve optimal results, so it’s worth setting a timer to ensure the product works fully before scrubbing off.
  3. Rinse thoroughly and wipe with a damp cloth or sponge
  4. Repeat if needed until all the mould is gone.

For more cleaning and bathroom tips, check out our guides on deep cleaning your bathroom and how to wash your towels. 












How to Kill Bathroom Mold: 8 Methods to Try

  • Mold is a harmful substance that can grow in your apartment
  • Removing mold can be an extensive process, so preventing it is best
  • If you see mold, you can use several household cleaning products to remove it

So, it’s happened. You’re in the shower and you spot it — mold. What do you do now? It’s tricky to know how to kill mold in a safe way and make sure it doesn’t come back. Luckily, there are several ways to ensure your apartment is clean and mold-free. Here are multiple ways you can kill mold.

Understanding what causes mold

Before you can kill the mold in your apartment, you have to know what caused it. Mold can occur in a couple of different ways:

  • Lack of or poor ventilation that causes moisture to linger in the air
  • Faulty plumbing like leaking sinks, faucets or drains
  • Damp materials like rugs, towels, wallpaper, grout or drywall that never completely dry

These are the most common ways mold forms in your apartment. Now that you understand the different ways mold can grow, you can identify what caused the mold in your apartment and choose the best tip to prevent and kill it.

How to kill mold in your apartment

It’s recommended that if the affected, moldy area is larger than 10 feet or if you notice mold is growing in your apartment’s insulation, you should call a professional. However, if it’s a small area and the mold is already there, you need to get rid of it.

Here are some mold-prevention tips to make sure mold never inhabits your apartment and living space again.

1. Use or install a bathroom fan

Use the bathroom’s ventilation fan while you bathe and leave it on for 30 minutes after you get out. If you don’t have a ventilation fan, think about installing one. The fan can help suck the moisture out of the air so it doesn’t linger and lead to a mold infestation.

Another tip on how to kill mold is to keep down the humidity in your home. Fans and dehumidifiers can help improve ventilation in the space, therefore reducing moisture that can cause mold.

2. Organize your bathroom products

Yes, organization can actually help keep your space safe and mold-free.

When you leave things like shampoo, body soap and bath toys on the side of the shower without ever removing them, water gets stuck underneath allowing mold to grow. By frequently adjusting their placement and cleaning underneath them weekly, you can reduce the risk of mold growth in your bathroom.

3. Apply tea tree oil

Not only does tea tree oil have a nice smell, but it’s also a great way to get rid of and kill bathroom mold. Simply mix one teaspoon of oil and one cup of water. You can either pour the mixed solution into a spray bottle or pour it into a bowl and dip your scrubber into it. Scrub the moldy area with the mix to remove the mold.

Once the area has been cleaned don’t rinse it with water as it’s best to let the mixture sit to prevent future mold from growing. Note, when buying tea tree oil for mold removal, make sure it contains melaleuca alternifolia in the ingredients.

4. Clean with vinegar

Vinegar is an effective, non-toxic way to get rid of mold. If you go with this method, here’s how to use it. Pour white vinegar into a spray bottle and make sure to not dilute it with water. Spray the affected area with the vinegar and let it sit for one hour.

If you have windows in the area you’re cleaning, it’s best to leave them open for ventilation. After an hour, use hot water to wipe the area clean. Finally, dry it off completely as mold thrives in damp places.

5. Use baking soda

Baking soda is another option if vinegar isn’t for you. Not only does it kill mold but it absorbs moisture. This is a great option if you have pets as it isn’t harmful to animals.

Mix a quarter of a tablespoon into the water and pour it into a spray bottle. Spray the area and scrub the mold away, then rinse the area with hot water. Finally, you can spray the area again and let it dry to prevent future mold.

6. Sanitize with bleach

Bleach is a good way to get rid of mold on nonporous surfaces, however, it’s not recommended to use bleach on surfaces such as wood. Make sure when using bleach that you take all the safety precautions, such as wearing gloves and having proper ventilation. Remember to never mix bleach with any other cleaning solution as it can cause toxic fumes.

The most effective way to use bleach to kill mold is to mix one cup of bleach with a gallon of water. Spray it onto the affected area, let it soak and scrub that nasty mold away. When you’re done, rinse the area down and dry it completely.

7. Scrub with borax

Borax can be found at most grocery stores in the laundry detergent aisle and is a great option to get rid of and kill most molds in your bathroom. Mold Help for You has a great recipe for a borax solution to kill mold that’s easy-to-make and effective.

8. Clean using hydrogen peroxide

Hydrogen peroxide is easy to find and easy to use to kill mold. All you have to do is spray the area with it and let it sit for 10 minutes, then scrub the area and rinse with hot water.

Getting rid of mold for good

Mold is never a welcome guest in your home or bathroom. But with these cleaning solutions and tips on how to kill bathroom mold, you’ll be prepared and ready to attack and kill next time it strikes.

How to get rid of mold in the bathroom

The bathroom is one of those rooms in which mold appears most often. This microscopic fungus develops from the smallest spores that are found almost everywhere – in the air, water, soil, plants and our clothes. It is in the bathroom that the most favorable atmosphere is created for the growth and development of these humps:

  • high air humidity;

  • sufficiently high temperature;

  • lack of a constant supply of fresh air.

Let’s find out how to quickly and effectively get rid of mold in the bathroom.

Different surfaces – different products

Mold can appear in a variety of places – in tile joints, directly on tiles, on the ceiling, etc. We tell you how to deal with microscopic fungi on all these surfaces:

Tile joints. If the white grout between the tiles has darkened – turned black, greenish or reddish – then you are dealing with mold. To begin with, all infected grout must be removed with sandpaper. Carefully remove not only stains, but also clean-looking material. Fungal spores can penetrate deep into the structure of the coating, so do not be afraid to get rid of potentially infected grout.

Apply any bleach to cleaned areas: the chlorine contained in it effectively kills fungal spores. Then heat the treated surfaces properly with a hair dryer. Having figured out how to get rid of mold in the joints in the bathroom, you can easily cope with the rest of the work: now you need to re-wipe the places between the tiles and fix the result with clear varnish. The latter will not allow mold spores to “sprout” again on the tile joints.

Tiles. Tiles can be treated with a mixture of table vinegar and water, hydrogen peroxide or soda solution. However, tea tree essential oil is considered the most effective solution. Dilute a tablespoon of this remedy in two glasses of water, pour the mixture into a spray bottle and shake well.

Spray the tiles with this solution and close the bathroom for a few hours. The best option is to carry out the treatment in the evening so that the destruction of mold continues all night. In the morning, wipe the tiles with a dry cloth. Tea tree essential oil will not only remove colonies of microscopic fungi, but also prevent their re-emergence.

Ceiling and walls. Finding out how to get rid of mold on the ceiling in the bathroom, many people are confused. In fact, plastered and painted surfaces have a rough texture and are therefore difficult to process. In addition, mold penetrates deep into the structure of whitewash, paint and other materials, so the fight against it will be extremely difficult.

In such cases, experts recommend the following:

  1. Mark all affected areas with a pencil.

  2. Remove moldy finishes.

  3. To prevent fungus spores from spreading, moisten the surface to be treated with water from a spray bottle.

  4. Apply any antiseptic (household bleach, hydrogen peroxide, etc.) to the walls and ceiling.

  5. Treat clean walls within a 0.5 meter radius of infested areas.

    6. Finding out how to get rid of mold in the bathroom with folk remedies

    1. Repeat the procedure again: treat the surfaces with a special agent, let it dry and remove the layer of whitewash, plaster or paint again.

    2. Apply another coat of antiseptic to the walls and ceiling. Let it dry

    3. Finish the areas to be treated as required.

    If home remedies don’t work

    Alas, the usual ways to fight mold often turn out to be ineffective. You spend a lot of time and effort on the destruction of the fungus, but after a while, specific spots with an unpleasant odor reappear. The most correct decision in this case is to turn to professionals, for example, to the employees of the City Sanitary Service of St. Petersburg. They work quickly, efficiently and with a guarantee for all services. They promptly go to the place, correctly choose the method of destroying the fungus and use only proven means that are completely safe for humans and pets.

    To find out how to get rid of mold in the bathroom, as well as order the services of specialists from the City Sanitary Service of St. Petersburg, call +7 (812) 606-75-66.

    How to get rid of mold in the bathroom

    Contents:

    1. The main causes of mold
    2. How to get rid of fungus in the bathroom
    3. How to remove mold from walls

    The bathroom is an ideal environment for mold growth. Warm, dark, damp – all conditions are met. Mold appeared more than two hundred million years ago, survived heat and cold, it is extremely resistant to various kinds of influences and is quite difficult to fight. Once it appears, it will not disappear on its own, and you will not be able to remove it with the usual detergent that you used before. To destroy mold, a special approach is needed. Both folk remedies and professional chemistry can be equally effective. Let’s figure it out.

    Mold

    Main causes of fungus

      • Humidity above 70%. In a closed room where there is access to water, this humidity is normal. However, this is what causes the fungus.
      • No direct sunlight. Almost always, the layout of the bathroom does not involve windows and the penetration of sunlight, which in itself destroys the fungus.
      • Hot water steam and coil heat is an ideal tandem for mold development.
      • Cracks in walls, plaster, between skirting boards – a good place for steam to accumulate and subsequently mold.
      • Poor ventilation. With stagnant air and a combination of other reasons for mold, there are no barriers to develop.

    The problem of mold appearance affects not only the appearance of the premises, but also human health. There are a huge number of diseases that this fungus can provoke. Starting from bronchial asthma, ending with systematic migraines and high blood pressure.

    How to get rid of fungus in the bathroom

    Mold in the bathroom

    If you notice black spots in the corners of the bathroom, do not miss it. You need to act immediately – this is mold, and it will multiply very quickly.

    One of the most famous and effective methods in the fight against mold is 9% vinegar.

    Vinegar is sprayed on the places affected by the fungus, allowed some time for the reaction to begin and then washed off with warm water. With this approach, the most important thing is to apply vinegar to all disputes without missing a single centimeter. Otherwise, the growth of the fungus will resume much faster than you expect.

    Hydrogen peroxide also works well against black mold. The processing principle is identical. Pour a generous amount of peroxide over the affected areas, or spray it with a spray bottle, let dry, then rinse with water.

    Mold control

    Ammonia can also be useful in fighting black spots on walls. You need to process all the same affected places, leave for an hour and a half. At this time, it is better not to use the bathroom. Also make sure that animals and children do not have access to this room during the treatment period.

    Boric acid and blue vitriol are another help in the fight against mold in the bathroom.

    All these products are available to anyone, they are inexpensive, but their effectiveness is on a par with expensive chemicals, which often contain the lion’s share of the above substances.

    How to remove mold from walls

    Fungus on the wall

    Bathroom walls are the first to be attacked by black mold. Freshly laid ceramic tiles, beautiful grout and new bathroom interior design can be seriously ruined by the appearance of black spots. They carry not only an unpleasant appearance, but also a direct danger to human health.

    We act in stages.

    • If you notice mold, act immediately.