Cover shower window: How to Cover a Window in the Shower: 8 Steps (with Pictures)

Solution to the large window IN the shower… Simple DIY cover!

Here’s the Before-and-After of the bath renovation.
Here’s an index of all bathroom remodel posts

We have a large window IN our shower– not unusual in old houses.

Below is the bathroom before we began the remodel… the layout was awesome.

You can see that our ever-creative, previous owner applied his signature-brand of totally-impractical-I-found-this-in-the-trash-and-couldn’t-pass-it-up-solution.

I will give him credit for ONE thing, though– he used a luxury ledge tub… The side of the tub that’s against the wall has a ledge 4″ wider than normal.

That doesn’t sound like much, but it really is… especially if you’re concerned with being too close to a shower window.

As we planned the new bathroom layout, (which involved gutting the room down to the studs, and moving the sink over to the same wall as the super-fancy concealed trapway toilet, we considered rearranging the shower location.

But the room is narrow, and we decided there was no good way to align the tub with another wall.

Here’s the window before. It was the original one, and trimmed out in wood… Please don’t ask me about the sill. I DON’T KNOW.

We also considered putting in a smaller window… and moving it well above the shower area.

But in the end, I didn’t want to give up the natural light– I like the large window!

Also, I like my bathrooms to be BLINDINGLY bright… I’m really not kidding… I would put floodlights in, if Paul didn’t stop me.

Plus? By the time we began the bathroom remodel, I had decided that having a giant window in your shower is a total luxury.

What initially felt like a design-challenge is one of my favorite elements of this bathroom… In the summer, it feels like an outdoor shower.

If you don’t have one? I suggest you go hack a hole in the side of your house RIGHT NOW.

I should say that privacy is not an issue for us, so I get this may not work for you, but either way, here is my not-very-technical summation of how we waterproofed the window in the shower.

I do not pretend to be an expert on any of this. At all.

Mostly I held things. Or handed things… Or provided valuable commentary that Paul could not have lived without.

I have so many good suggestions ALL THE TIME.

Like what? I’m so glad you asked!
Like: all grout should be PERFECT.

And? Guess who is the grout-inspector.
That is correct. I was BORN FOR THIS JOB.

We (Paul) backed the subway tile in the shower with Wedi board.
He cut and installed the Wedi boards around the sill, continuing it around the window edge, right up to the frame.
Then we tiled right up to the window.
We used a narrow marble sill on the bottom lip.
Remember to caulk, not grout the change of planes.

We ordered a window with vinyl interior trim, and pebbled privacy glass.

Theoretically the water wouldn’t hurt the window– it’s just vinyl and glass. Plus the whole thing pops out for cleaning…

But Paul wanted to keep the water from hitting the window directly, so to make it REALLY classy— we cut a piece of plexiglas to cover just the bottom half of the window.

It’s held in place with four small dots of caulk. It’s actually great, because you can pull it out to clean it, it doesn’t block the light, and the window stays remarkably dry.

If you don’t have an old house, you may not understand that sometimes the ultimate solution is unconventional…

And, there is really no way to make plexiglas sound like anything other than how you might fix a window in your Appalachian shack… so I won’t try to convince you.

index of all bathroom remodel posts

10 Stylish Ways to Maintain Shower Window Privacy

A window near the shower—is not that strange? Possibly a little. However, it is essential, too, because window in shower area bring in natural light and cater to the ventilation to prevent offensive odours.

The only factor, though, is privacy; here, you cannot possibly wish to make such a significant concession. That is why you must be highly cautious while designing bathroom windows to avoid outsiders peeping into your bathroom and impending privacy and security. Of course, a window serves as one of the aesthetic additions to the bathroom design, but is aesthetics ever preferred over privacy? What about a strategy that is practical, safe, and attractive?

How can one achieve that? Here are some shower window privacy tips for keeping up with privacy while you let in the sunshine and cut down on electricity expenses.

10 Tips for Desired Shower Window Privacy

Imagine your bathroom having a nice view of the outdoors. You would not want to cut that down, would you? The only thing preventing you from installing a large window is a concern about privacy. If you are looking for some shower window privacy solutions or how to make a shower window privacy, here we share some shower window privacy tips, bathroom privacy window ideas, shower window privacy ideas, ideas to cover bathroom window:

01. Bathroom Window Treatment: Conceal it with Glass Covers

One of the bathroom shower window privacy ideas is to conceal the windows with glass covers. Add charm to the already existing windows with glass covers. These are extremely thin and flexible. It will adhere to the glass without glue or adhesive. In addition, there are many options for the glass cover’s colours, patterns, and textures that let you choose based on the type of aesthetics you want to add.

Make sure your window glass is clean before applying these. Cut the cover to fit the glass and mist it to stick it to the surface. Swipe it to remove any air bubbles, and your window is ready to let in abundant natural light while concealing your private space.

Window Film

Window Stickers

Window Films

Buy Now

02. Bathroom Window Privacy: Keep it Higher!

The cleverest hack for desired privacy and maximized aesthetics is to stick the window for bathroom shower up the wall. Bathroom shower window is sure to add character to your shower area and flood in natural light inside.

03. The Beauty of a Frosted Glass Shower Window

Are you opposed to closing windows with blinds or curtains but still looking for ways to maintain privacy? Allow the beauty of frosted glass to work its magic. This method of opaque bathroom windows is highly effective at blocking any outside views into your bathroom. Frosted glass bathroom windows, frosted shower window are one of the most recommended methods for treating your bathroom windows due to its ease of use and installation. Frosted glass is the privacy glass for bathroom window.

The image will be distorted due to the pitted texture of the glass.

You can either stick an acrylic panel or spray paint to achieve this look. Besides frosted glass, various types of glass are available in the market. Have a look to learn more about it:

Interior

Types of Glass Available in Market & their Architectural Features!

Window Film Frosted Sticker

Frosted Window Film

Buy Now

04. Bathroom Privacy Window Idea: Etching Cream laying a Canvas

If you want window treatments that allow light & provide privacy, then here we have a solution for you. When coating your bathroom windows for privacy, you have two options: a temporary or long-term solution. You can use your imagination to create an etching pattern on a permanently etched frosted glass window.

Apply a small amount of etching cream and let your creative side shine. The versatility of this technique is its best feature. Only a tiny amount of cream is required to allow you to work, and it can easily be removed with soapy water and spirit for an immaculate appearance. The result is expected to be satisfying and long-lasting.

Etched Flowers Glass Film

Etched Lace Window Film

Buy Now

Etched Privacy Window Film

Glass Etching Cream

Buy Now

05. Keep It Behind the Curtain to Maintain Bathroom Window Privacy!

Why not use curtains in the bathroom as one of the ideas for bathroom window privacy, where they are known to keep things private? Being opaque, you never worry about anybody seeing through them in your bathroom. Go for high-quality curtains in prints that complement the refreshing vibes of the toilet. You can open or close them as you please.

Embossed Design Shower Curtain

Transparent PVC Shower Curtain

Polyester Designer Shower Curtain

Buy Now

06. Shower Window Privacy Solution: Hide with Blinds

If you want to know how to cover shower windows, hide it with blinds. Adding blinds is a modern and stylish approach to addressing privacy issues. Opt for mini blinds that are easy to maintain and do not get damaged by moisture levels formed in the air. There are numerous sizes and patterns available in these, so opt for the ones that cover your window size and suit your design preferences. Have the flexibility to control the light by putting the blinds at certain angles.

Pro-tip: Install blinds to obstruct the view while leaving the glass frame clear beneath. Enjoy the lovely view while maintaining the necessary privacy.

Window Blinds

Zebra Blinds

Jacquard Roller Blinds

Buy Now

07. Bathroom Window Treatment: Adorn with Art!

Are you an art lover who loves being surrounded by all things artistic? Well, let your creative soul pave the path to reaching privacy. Conceal your shower window by adding your favourite artwork to it. This will accentuate the essence of the whole bathroom and transform a bland bathroom into an appealing retreat. The art will block views from the outside but maintain the light inside.

Pro-tip: For a white backdrop, add a vibrant art piece that spruces up the whole decor and vibe of the bathroom.

Beach Wall Art

Canvas Art

Artwork Of Ship

Buy Now

08. Security Brought to You by Privacy Film for Bathroom windows

The answer to how to make a bathroom window private is by adding privacy films. Adding privacy film to the bathroom glass is one of the versatile ways to conceal it. This temporary fix can be removed whenever you wish to add something to the latest print. So please relax and enjoy the advantages of window tinting without worrying about cleaning them. As the name implies, this privacy film will maintain the desired privacy and prevent anyone from looking inside.

PVC Bathroom Window Film

Privacy Glass Film

Window Privacy Glass

Buy Now

09. Shutter down with Wooden Shutters (Bathroom Window Treatment)

Are you looking for an alternative to traditional glass solutions? You could consider using traditional wooden shutters to close the windows for shower privacy. These are among the most dependable solutions for bathroom window privacy.

Whether you want to keep it rustic with a natural finish or classic with white-painted shutters, you have complete freedom to experiment with and adopt the design language of your choice. Another advantage of installing wooden shutters is that you can adjust them according to the weather. The key thing to remember here is to choose shutters with finished edges and let these natural beauties blend in with the bathroom decor.

10. A Classic Glass Block Window to Ensure Bathroom Window Privacy

Take a different route and go for a glass block window instead of the standard one. This idea is sure to maintain illumination levels while increasing privacy. Another significant advantage of adding this window is that it serves waterproofing issues.

This permanent solution works best for areas that need the most privacy and lets you address issues like wet or decaying walls as well.

Get the Right Treatment with these Considerations

Your choice of window treatment is crucial not only for privacy but also for aesthetics. An ideal approach is one that caters to the design of the bathroom as well. In addition, to help you figure that out, here are the considerations you need to link into before finalizing the window treatment.

01. Evaluate the Bathroom Area

Determining the area of the bathroom is extremely important before starting with anything. It is crucial because this will be a guidepost to ensure that the chosen treatment does not make the space look gloomy or overwhelming. This step will further lead you to the size of the window.

02. Determine the Window Dimensions

After assessing the area of the bathroom, check on the window dimensions. Is it too large? Is the window very small to influence the treatment plan?

You would definitely want to conceal a large window to an extent that it does not let views to the inside but at the same time want natural light? Well, the simplest approach is to add blinds that do not shut completely. Keep these blinds a little higher from the window’s edge to let in natural light.

The size of the frame, sill height and other factors play a vital role in determining the choice of the treatment.

03. Lighting Requirements

One of the main aspects of the bathroom window treatment is the desired lighting levels. The smartest approach here is to let as much natural light as you can to cut down on the usage of artificial illumination. However, if you like showering in mood lighting, then you might want to conceal the window to an extent that the bathroom does not become too bright for you.

Wall Light

Retro Design Light

Bathroom Wall Light

Buy Now

Covering it Up!

While windows in the most private areas of the home were always avoided in previous decades, a modern approach says otherwise. Most of the bathrooms today are built with a bathroom window to maintain the natural ventilation and lighting. This additional dimension of shower window privacy serves as an escape route for odour and moisture formed in the air.

While many people find the inclusion of bathroom windows strange, the innovations and creativity are there to make this a normal thing. There are numerous ways to incorporate windows while maintaining the desired level of privacy in these shower areas.

Go on, add an opening, and let the latest ideas conceal the views!

Image Courtesy: Image 4, Image 5, Image 7, Image 8, Image 9, Image 10

Author Bio

Saili Sawantt – She is an Architect and Interior Designer by profession. Writing is what she treats as her passion. She has worked as an Architectural Writer, Editor, and Journalist for various design as well as digital portals, both national and international. Formerly she has also worked with Godrej Properties Limited (GPL) Design Studio, Mumbai, due to her keen interested in learning about Sustainability and Green buildings. Apart from this, she runs her blog ‘The Reader’s Express’ and is a practicing Architect & Interior Designer.

Glass shower screens: features, designs, benefits

Glass shower screens are an excellent option for enclosing when you want to make your bathroom comfortable, beautiful and modern. Due to the fact that mostly glass partitions are made to order, they can easily fit into both small and spacious bathrooms.

The lack of frames and guide profiles on the glass partitions gives the impression of a light and airy structure.

Shower screens are made of tempered glass, which is specially heat treated for greater strength. Such glass is 5-7 times stronger than ordinary glass and it is very difficult to break it.

Shower screen seals

Glass shower screens, doors and cubicles are sealed using a transparent seal that is installed directly on the glass. Due to the plasticity of the material, a snug fit to the openings is ensured.

Glass shower screens are designed to minimize possible water leakage. The usual use of baffles prevents water from splashing all over the bathroom.

There are three degrees of tightness of glass shower screens:
Level 1 – contour protection profile. Thanks to this tightness, maximum protection against dripping and splashing of water is achieved.
Grade 2 – profile nut and seal. The profile threshold is an obstacle to the leakage of water from the booth, which ensures good tightness.
Grade 3 – partitions without threshold and protective profile. Usually such partitions are installed for the sake of design and do not care much about tightness.

Aesthetic and practical advantages of glass shower screens

First of all, it is worth noting the visual appeal and modern look of glass shower screens. The completely transparent design of the shower looks weightless, creates the effect of lightness, and also visually enlarges the space of the bathroom. In addition to transparent glass for partitions, glass tinted in bulk and colored films, completely frosted or with a pattern, is used.

Only durable tempered glass is used for partitions, so the risk that the glass will crack or break, thereby causing harm to human health, is minimal. Glass can also be laminated with a special film, thanks to which, in an emergency, the glass does not crumble, but remains on it.

Glass partitions in the bathroom have a high maintainability. If any part fails, it is easy to replace it without changing the whole structure.

Shower screens are low maintenance. You don’t need any special products to clean them, just a normal glass cleaner.

Possibility to order any shape. Glass partitions made according to individual drawings will emphasize the originality and uniqueness of the interior.

Articles on the topic

How and with what to wash the shower cabin: industrial and folk remedies

A brand new shower stall sparkles with dazzling cleanliness – but for how long? If you do not take care of the box, the shine will fade under a layer of lime, and sometimes even very neat housewives cannot cope with streaks on the walls. For a quality result, it is important to understand how and with what to wash the shower. Let’s talk about it in this article!

Shower enclosure maintenance: basic tips

Any contamination is easier to remove while it is fresh. Make it a rule to rinse the hydrobox after a shower – first with hot water, then with cold. Spots will appear much less often! Soap flakes, shaving cream, and toothpaste dry out quickly, so splashes should be cleaned up as soon as possible.

Give your shower a deep cleaning once or twice a week. It is supposed to start with glass and wall cladding adjacent to the shower enclosure, then move on to fittings and accessories. Pallets are processed last.

Pay special attention to hard-to-reach areas where dirt, moisture and soap residue tend to accumulate:

corners;
tile joints;
rebar cuts;
place near the drain.

After wet cleaning, all components of the shower cabin are thoroughly wiped with a dry non-woven cloth or a soft roller. Remember that tap water contains chlorine and calcium, which form salt deposits. With increased water hardness, it does not hurt to equip the water supply with coarse and fine filters.

Constantly high humidity in the bathroom creates a favorable environment for mold growth. It is very difficult to get rid of mold – it is possible that the seal will have to be completely changed. For prevention, it is recommended to periodically treat the sealant with an antifungal spray and keep the cubicle doors ajar so that the room is ventilated. It is even better to install a forced ventilation system in the shower cabin.

How to deal with stains on the walls

Even after thorough cleaning, untidy streaks can remain in the shower stall, casting a shadow on the reputation of the hostess. We are let down by the old habit of wiping all polished surfaces with a rag, but textiles are not suitable for plastic, glass and ceramic tiles. In addition, a rough cloth, a brush or a hard-bristled brush can scratch the pan or walls of the hydrobox and damage the anti-corrosion coating of the steel reinforcement. To keep your shower enclosure looking attractive for as long as possible, use materials and tools that do not leave marks to clean the box and remove residual moisture:

melamine sponges;
cuts of latex or microfiber non-woven fabric;
steam cleaners;
rails and scrapers made of polyurethane, rubber and silicone.

How to Remove Limescale, Rust and Mold: Proven Home Recipes

Nothing spoils the appearance of a shower like lime deposits, so action must be taken as soon as possible. Until the plaque sticks tightly, the problem is easy to deal with at home. To get started, try cleaning the shower cabin from limescale with a weak solution 9% vinegar or lemon juice at the rate of one tablespoon per glass of boiling water. If you feel sorry for lemons, dissolve one sachet of citric acid in the same amount of water. You can also try to wipe the shower from mineral deposits with vodka or medical alcohol. Vodka is diluted in the ratio of one glass to one or two glasses of water, and alcohol – according to the formula 5 ml per 5 liters of water.

To enhance the effect, vinegar, vodka and lemon juice can be combined in one solution, and citric acid mixed in equal parts with soda. In its pure form, soda should not be used – scratches may remain. Hydrogen peroxide also works well with limescale.

Strong lime deposits on metal fittings are treated with more concentrated solutions:

250 ml of vinegar per half liter of water;
juice of one lemon or 20-30 grams of citric acid in half a glass of water;
half a glass of alcohol and vinegar to a glass of water.

Hoses, faucets, hydromassage heads and holders are cleaned with a sponge soaked in the solution, and tarnished chrome elements are rubbed with a slice of lemon to restore shine. Inlet filters, watering cans, distributors and nozzles are often clogged with lime and small debris, so they have to be removed and cleaned separately. The sediment is first removed from the holes of the perforated elements with a sewing needle, and then kept for an hour in vinegar, diluted in half with water. When the precipitated salts are completely dissolved, the parts are thoroughly rinsed under running water and returned to their place.

Vinegar is good for rust. Spray the affected areas with a spray bottle, leave for half an hour, and then rinse with running water. Heavily contaminated with a rusty coating, pallets are filled with a solution to the brim and left overnight. Small rusty spots on metal and acrylic are reduced with tooth powder or paste: apply a thin layer of the product and rinse after 10 minutes.

Glass doors and walls of hydroboxes also suffer from lime deposits: mirror and transparent railings become cloudy and dull. Ammonia in a matter of seconds will return the glass to its original appearance. Pour a tablespoon of ammonia into a liter of cold water and treat the walls with a microfiber cloth soaked in the solution – very soon there will not even be a trace of limescale left in the shower! To enhance the water-repellent properties in glass showers from limescale, ammonia with glycerin is used – from 20 to 40 ml of glycerin per liter of ammonia solution. Ammonia compounds strongly irritate the respiratory tract, therefore, when processing shower cubicles in the bathroom, a fan is turned on, and windows are opened in neighboring rooms.

If mold develops between the seams, immediately treat the problem areas with a mixture of baking soda, ammonia and vinegar. Take half a cup of ammonia and vinegar to a quarter cup of soda, apply the mixture on the stains with a toothbrush and leave for 30-40 minutes. Our grandmothers expelled mold brown and white, taken in a ratio of 250 ml per 4 liters of boiling water. Not bad proved itself and 5-10% copper sulphate, which is found in every summer resident. A tablespoon of vitriol is diluted with a liter of water and applied to the lesions, allowed to dry and the procedure is repeated at least three times.

Black mold is also affected by some natural remedies, which should be completely absorbed into the material:

tea tree oil – two teaspoons per 400 ml of water;
white vinegar – used undiluted;
grapefruit seed extract – 20 drops per 400 ml of water.

How to wash shower cabins: choosing household chemicals

For cleaning in showers, liquid SMS, sprays, pastes and emulsions are suitable, which do not contain abrasive particles, pigments and solvents such as alkalis, formaldehydes and formic acid. Powders should be avoided: even if they are positioned as universal, they still contain abrasives. Tempered glass is acid tolerant but may darken after contact with concentrated solutions.

Plastic shower boxes do not tolerate acetone, gasoline or ammonia, and for naughty acrylic shower trays, you will need special products designed specifically for acrylic – for example, Triton or Acrylic Cleaner. Also, acrylic trays can be treated with silverware polishes, which are sold in jewelry stores.

Enameled trays are much easier to maintain. Unlike acrylic and other plastics, enamel does not contain micropores into which dirt, moisture and dyes get into, calmly endures one-time contact with abrasives and does not impose special requirements on the choice of care products.

Finely polished porcelain stoneware shower trays are dirt-repellent but still take care of themselves. Periodically wipe the pallet from the outside and inside, and if the dirt cannot be removed, use an industrial compound to care for artificial stone products – for example, Mellerud.

If you notice fingerprints, splash marks or thin deposits on the shower enclosure, remove it with any dish detergent. Common liquids and emulsions for windows, such as Tilex, Acrylan, Sanelite, Cif and Mr Muscle, qualitatively wash the shower glass from fresh stains.

Commercial shower gels, liquids and creams can also be used during routine cleaning to quickly remove week-old stains. Reagents are applied for 10-15 minutes, then carefully removed with a scraper and rinsed with warm water. Strong pastes are used to remove stubborn soap suds, rust and calcined sediment, extending the exposure time to 15-20 minutes.

How to clean metal fittings?

Metal fittings and shower accessories also need periodic cleaning and anti-corrosion treatment. Steel faucets, hoses, watering cans, brackets and door hinges are often coated with plaque, but if the steel is coated with a nickel-chromium coating, it is impossible to scrape the shower equipment with abrasives, otherwise you will violate the integrity of the coating and leave the fittings defenseless against corrosion.

Solution to the large window IN the shower… Simple DIY cover!

10 Stylish Ways to Maintain Shower Window Privacy

Glass shower screens: features, designs, benefits

Shower screen seals

Aesthetic and practical advantages of glass shower screens

Articles on the topic

How and with what to wash the shower cabin: industrial and folk remedies

Shower enclosure maintenance: basic tips

How to deal with stains on the walls

How to Remove Limescale, Rust and Mold: Proven Home Recipes

How to wash shower cabins: choosing household chemicals

How to clean metal fittings?

Categories