Garden wall frame: Vertical Garden Frame – Etsy.de
Vertical Garden Frame – Etsy.de
Etsy is no longer supporting older versions of your web browser in order to ensure that user data remains secure. Please update to the latest version.
Take full advantage of our site features by enabling JavaScript.
Find something memorable,
join a community doing good.
(
1,000+ relevant results,
with Ads
Sellers looking to grow their business and reach more interested buyers can use Etsy’s advertising platform to promote their items. You’ll see ad results based on factors like relevancy, and the amount sellers pay per click. Learn more.
)
Framed Wall Planter – Etsy.
de
Etsy is no longer supporting older versions of your web browser in order to ensure that user data remains secure. Please update to the latest version.
Take full advantage of our site features by enabling JavaScript.
Find something memorable,
join a community doing good.
(
319 relevant results,
with Ads
Sellers looking to grow their business and reach more interested buyers can use Etsy’s advertising platform to promote their items. You’ll see ad results based on factors like relevancy, and the amount sellers pay per click. Learn more.
)
Arrangement of the frame, wall, floor of a frame house
Arrangement of the frame, wall, floor of a frame house resembles a constructor when it comes to ease of assembly.
Everything in its device is extremely simple and functional, because initially frame houses were intended for immigrants to North America in order to quickly provide them with temporary housing. Therefore, such houses are also called Canadian. Over time, they were brought to mind and they became permanent comfortable housing.
Frame house assembly steps
| 1. Floor arrangement The lower trim of the house is assembled on the foundation, planed wood boards, tongue-and-groove with the help of self-tapping screws and nails are attached to the floor joists |
| 2. Assembly of the frame Corner and other support posts are attached to the lower trim and the floor, boards and floor beams, rafters are mounted on them, the upper trim and the roof frame are assembled |
3. Installation of walls After the frame is assembled, frame panels are attached to it, made strictly according to the project and drawings and equipped with all necessary materials |
Construction of the floor and frame of the house
1. Construction of the floor
Construction of the floor of the frame house is very important, as the floor is the main base for the further construction of the house. As a floor covering, a planed, tongue-and-groove board is usually taken, which lies perpendicular to the floor joists and is nailed to them at an angle so that the nails are not visible from the outside and do not interfere with further work with the floor.
2. Frame of the house
The most important part in the construction of a frame house is its frame. The frame of the house is a “skeleton” of a building rigidly linked in three planes from bars of different cross-sectional areas, on which the rest of the house structure, such as walls, roof, etc.
, is attached. The strength of the future home will depend on the rigidity of the frame hitch. It is important to calculate in advance all the forces and loads that will act on the frame. It is also important what kind of wood the frame is made of. Wood has strict requirements for moisture: it must be properly dried and processed, this is the key to the longevity of the house.
Frame house wall arrangement
Frame house wall arrangement, as a rule, is represented by a sandwich panel of several materials, each of which has a certain functional value.
1. Insulation – the most important layer in the frame board
Currently, several modern materials are used as insulation for the boards of a frame house, which have low thermal conductivity with a relatively small volume. For example, mineral wool or basalt slab, which, with a thickness of 15 mm, replace 2 meters of brickwork. Or even more technological penofol, which is enough just 3-4 mm. The figure below shows ecowool insulation as an alternative.
Arranging the wall of a frame house
2. Films for protection against steam and water
There is a vapor barrier film on the inside of the insulation, and a hydroprotective film on the outside. A membrane against moisture is necessary so that the insulation does not get wet and does not lose its protective properties. Of course, because of these films, the house does not breathe at all, so it is advisable to equip it with a ventilation system.
3. Materials for inner and outer cladding of the shield
The innermost cladding layer in the construction of the wall of a frame house is drywall, it has a number of advantages, it is non-toxic and does not burn. Outside, the house is sheathed with cement-bonded particle boards or OSB oriented strand boards. Both those and others have their own advantages – environmentally friendly, frost-resistant, DSP does not burn yet. There is also an option for external cladding with a second-rate board. In addition, the outer skin is sometimes lined with brick or decorative panels.
No matter how simple the structure of the frame, walls and floor of a frame house may seem, you should be well versed in this if you are going to build or buy a frame house in Yaroslavl, because this will allow you to avoid unnecessary mistakes when building a house or evaluate the correctness of compliance with the assembly technology when choosing it. Only then will such a house meet all the declared characteristics of reliability and durability.
Our technologies and projects:
Canadian frame houses in Yaroslavl
Choosing a light foundation for a frame house
Frame interior partition: pros and cons
Frame garden house 4x5m with a porch
Basic equipment of a frame house
Foundation
9 0097 Post poles 40x40x40cm free of charge (if there is no foundation on the site)
Piping
Bottom piping is made with edged timber with a section of 100x150mm
Walls and partitions
The frame of the outer walls is made of edged board 50x150mm (thickness 150mm), the frame of internal partitions is made of edged board 5 0x100mm (thickness 100mm), bottom and top frame rails partitions are made of edged boards 50x100m.
The frame of the walls and partitions is sheathed with clapboard of class “B” on both sides. The outer walls are insulated with glass-staple fiber 150 mm thick, the insulation is laid on the outside with a wind-moisture protective vapor-permeable membrane, on the inside with a vapor barrier membrane. Insulation of internal partitions is not carried out. The internal height of the premises on the first floor is 2.5 m.
Floors and logs
The floors of the first floor are double: subfloor: edged board 18-20mm thick, finishing floors – floor planed grooved board 30-40mm.
The floor joists are made of edged boards with a section of 150x50mm, the beams are installed in increments of ~0.5m.
The floors are insulated with 50mm thick glass-staple fiber, the insulation is laid on both sides: from below with a wind-moisture protective vapor-permeable membrane, from above with a vapor barrier membrane.
The floors of the attic are laid over the interfloor beams of the floor of the house – a floor planed grooved board 30-40mm.
Doors
Doors are installed in the house: entrance and interior doors – paneled DHF (pine): box size 2.1×0.9m – 4 pcs. (paneled doors are not supplied with handles for opening and locks).
Windows
Wooden double-glazed windows OS GOST, glazed window blocks of incomplete factory readiness are installed in the house (window blocks are not antiseptic and not treated with protective compounds, glass is installed without the use of putty, there are no sealing gaskets on the sashes and porches) size 1, 2×1.2m – 4 pieces, size 0.6×0.6m – 1 piece.
Staircase
A staircase is installed inside the house, the main elements of which (steps, stringers, bowstrings) are made of wooden furniture panels. Useful width of stairs ~ 830mm. The stairs are assembled on self-tapping screws using metal corners for fastening winder steps and other structural elements. The plan of the stairs indicated in the drawings indicates only its location and direction of ascent, but does not reflect the detailed design of the stairs, the actual number and shape of the steps.