Pricing for wood flooring: Average Hardwood Flooring Prices In 2023 – Forbes Home

Average Hardwood Flooring Prices In 2023 – Forbes Home

Table of Contents

• Average Hardwood Flooring Cost

• How to Calculate Hardwood Flooring Costs

• Hardwood Flooring Cost Breakdown

• Hardwood Flooring Cost Cost By Type

• Additional Costs and Considerations Associated With Hardwood Flooring Installation

• DIY Hardwood Flooring Installation vs. Hiring a Professional

• How to Save Money on Hardwood Flooring

• Frequently Asked Questions (FAQs)

{{ tocState. toggleTocShowMore ? ‘Show more’ : ‘Show less’ }}

The cost to install hardwood floors ranges from $2,000 to $6,300, with a national average of $4,200. There’s something special about the warmth and beauty of hardwood floors that can instantly transform a room. Hardwood flooring is durable, elegant and timeless. But how much does hardwood flooring cost? In this article, we will break down the average costs of hardwood and how to calculate them.

Advertisement

THIS IS AN ADVERTISEMENT AND NOT EDITORIAL CONTENT. Please note that we do receive compensation for any products you buy or sign up to via this advertisement, and that compensation impacts the ranking and placement of any offers listed herein. We do not present information about every offer available. The information and savings numbers depicted above are for demonstration purposes only, and your results may vary.

Compare Quotes From Top-rated Local Flooring Contractors

Free, No-commitment Estimates

Find a Contractor

Average Hardwood Flooring Cost

How much does it cost to install hardwood floors? The average cost is determined by several factors, including the size of your home. For a 200-square-foot room, hardwood flooring prices could be as low as $1,200, while the installation of hardwood flooring in a 500-square-foot area could reach up to $12,000. These are the average national prices, including materials and installation:

Average Cost	$4,200
Highest Cost	$6,300
Lowest Cost	$2,000

How to Calculate Hardwood Flooring Costs

To calculate the cost of hardwood floors, you’ll need to consider several factors. Here’s how to calculate hardwood flooring costs:

1. Measure the room to find the total square footage.
2. Choose the type of wood you’d like to use. The type of wood will impact the cost of the flooring. Look up how much this wood costs per square foot.
3. Estimate additional costs if necessary

To calculate an estimate for installing hardwood flooring in your house, use the average numbers in this guide and multiply by the total square footage, then add any additional costs.

Hardwood Flooring Cost Breakdown

When it comes to the cost of hardwood flooring, there are several factors to consider. Here’s a breakdown of some of the main factors that can affect hardwood flooring prices:

By Room Size

One of the most important factors in determining the cost of hardwood flooring is the size of the room where you plan to install it. The larger the room, the more expensive the hardwood floor installation costs will be. Depending on the size of the room, you can expect to pay an average of between $6 and $12 per square foot.

2,000	$12,000 – $24,000
500	$,3000 – $6,000
1,000	$6,000 – $12,000
1,200	$7,200 – $14,400
1,500	$9,000 – $18,000

By Wood Material

When it comes to hardwood flooring, the material you choose can greatly affect the overall cost. Engineered hardwood is cheaper than, for example, solid hardwood. To help you make an informed decision, we’ve put together a table that shows the installation cost, material cost and average total cost per square foot for each type of hardwood flooring.

Engineered Hardwood	$3 – $10	$3 – $11	$6 – $21
Solid Hardwood	$3 – $10	$8 – $15	$11 – $25
Prefinished Hardwood	$3 – $8	$3 – $10	$6 – $18
Faux Parquet	$3 – $5	$4 – $10	$7 – $15
Genuine Parquet	$7 – $20	$8 – $20	$15 – $40

By Wood Width

Since it takes more wood to manufacture wider planks, their price is typically higher than those of narrower ones. However, installing wider planks is easier and can reduce labor costs. On average, the cost of installing three-inch planks can range from $2,000 to $6,000, while wider planks (around six inches) can cost anywhere from $5,000 to $12,000.

By Wood Thickness

Thicker planks are generally more expensive than thinner ones, as they are more durable and can last longer. On average, the cost of 3/4-inch-thick hardwood planks can range from $3 to $8 per square foot, while thinner planks (around 5/16 inch) can cost anywhere from $2 to $5 per square foot.

By Wood Grade

Select grade wood is typically more expensive than lower grades. Select grade wood has a uniform look and very few imperfections. On average, it ranges from $8 to $22 per square foot. Low-grade wood has a more rustic character with imperfections and color variations. On average, the installation costs anywhere between $2 to $6 per square foot.

By Wood Pattern and Style

The pattern and style of the hardwood can impact the overall cost. Additionally, hand-scraped or distressed hardwood can also be more expensive than smooth finishes. On average, the installation price for a standard hardwood plank can range from $6 to $10 per square foot, while a more complex pattern, like chevron or herringbone, will cost more.

By Wood Finish and Grain

A higher-quality finish, such as a UV-cured polyurethane, will be more expensive than a lower-quality finish. Additionally, certain grains, like quarter sawn or rift sawn, can also be more expensive. On average, the cost of installation for a hardwood floor with a standard finish and grain can range from $7 to $10 per square foot, while a higher-quality finish and grain can cost anywhere from $10 to $25.

Advertisement

THIS IS AN ADVERTISEMENT AND NOT EDITORIAL CONTENT. Please note that we do receive compensation for any products you buy or sign up to via this advertisement, and that compensation impacts the ranking and placement of any offers listed herein. We do not present information about every offer available. The information and savings numbers depicted above are for demonstration purposes only, and your results may vary.

Looking For Flooring Solutions And Seamless Installation?

Connect with top-rated flooring contractors on Angi and learn everything you need to know about laying new flooring in your house.

Explore Options

Hardwood Flooring Cost Cost By Type

Hardwood flooring cost varies depending on the type of wood. Here are some of the most popular types of hardwood flooring and their prices (for the materials only):

Pine Hardwood Flooring

Pine is one of the most affordable types of hardwood flooring. The material cost of pine flooring ranges from $3 to $6 per square foot.

Pros:

• Affordable
• Easy to work with

Cons:

• Prone to scratches and dents.

Maple Hardwood Flooring

Maple is a durable and attractive hardwood flooring option. Expect to pay between $5 and $10 per square foot for maple flooring materials.

Pros:

• Durable
• Attractive
• Affordable

Cons:

• Not good for humid places
• Prone to scratches

Bamboo Hardwood Flooring

Bamboo flooring is an eco-friendly and affordable option for hardwood flooring. The average cost of bamboo flooring is between $2 and $10 per square foot.

Pros:

• Eco-friendly
• Termite-resistant
• Affordable

Cons:

• Not very durable

Hickory Hardwood Flooring

Hickory is a popular choice for hardwood flooring because of its durability and unique grain patterns. The cost of hickory flooring ranges from $4 to $9 per square foot.

Pros:

• Durable,
• Unique grain patterns

Cons:

• More expensive than other wood types
• Difficult to work with

White Ash Flooring

White ash flooring is a durable and attractive option for hardwood flooring. The cost for new hardwood floors made of white ash range from $7 to $10 per square foot.

Pros:

• Durable
• Bold grain

Cons:

• Expensive
• Prone to scratches

White Oak Flooring

White oak is a strong and durable hardwood flooring option. Expect to pay a price between $6 and $11 per square foot for white oak flooring.

Pros:

• Strong and durable
• Wide range of color options

Cons:

• More expensive than other wood types
• Color variations can makes floors look varied

Red Oak Flooring

Red oak is one of the most popular types of hardwood flooring. Material prices for red oak hardwood flooring ranges from $5 to $9 per square foot.

Pros:

• A popular option
• Affordable
• Consistent color and finish

Cons:

• Not water-resistant

Brazilian Walnut Flooring

Brazilian walnut, also known as ipe, is a durable and attractive option for hardwood flooring. The cost of Brazilian walnut flooring ranges from $8 to $14 per square foot.

Pros:

• Highly durable
• Rich in color

Cons:

• Most expensive type of wood

Pine	$3 – $6
Maple	$5 – $10
Bamboo	$2 – $10
Hickory	$4 – $9
White ash	$7 – $10
White oak	$6 – $11
Red oak	$5 – $9
Brazilian walnut	$8 – $14

Additional Costs and Considerations Associated With Hardwood Flooring Installation

When installing hardwood flooring, there are some additional costs to consider.

Finish and Coating

When installing hardwood flooring, it’s important to choose the right finish and coating for your wants and needs. For instance, if you plan to install hardwood flooring in a room that is prone to moisture, this can damage hardwood floors over time. A moisture-resistant finish can help protect your floors from water damage and ensure that they last for many years.

Refinishing, Repairs or Replacement Needed

Over time, hardwood floors can become scratched, dented or otherwise damaged. If you’re planning to install hardwood flooring in a highly trafficked room, you may need to have your floors refinished, repaired or replaced sooner than you would with other areas of your home.

Advertisement

THIS IS AN ADVERTISEMENT AND NOT EDITORIAL CONTENT. Please note that we do receive compensation for any products you buy or sign up to via this advertisement, and that compensation impacts the ranking and placement of any offers listed herein. We do not present information about every offer available. The information and savings numbers depicted above are for demonstration purposes only, and your results may vary.

Using your home’s equity is an easy way to fund your new floors!

Get prequalified in minutes by clicking on your state.

Learn More

DIY Hardwood Flooring Installation vs. Hiring a Professional

You might wonder whether you should attempt to install hardwood flooring yourself or hire a professional. While installing the flooring yourself can save money on labor costs, installing hardwood flooring can be a challenging task. We would recommend hiring a professional flooring contractor instead.

The best flooring installation companies may cost more, but you will have peace of mind knowing that the job is done right and will last for years to come. This can help prevent mistakes or issues that can lead to costly repairs down the line. Additionally, professionals often have access to specialized equipment and tools that can make the installation process faster and more efficient.

How to Save Money on Hardwood Flooring

Hardwood flooring can be expensive, but there are ways to save money on your installation. Here are a few tips:

• Shop around for the best price: We recommend not settling for the first quote you receive. Get quotes from multiple flooring installers and compare them for the best price.
• Consider prefinished hardwood: Prefinished hardwood is already sanded, stained and sealed, which can save you money on labor costs.
• Choose a less expensive wood: Some woods, like pine and bamboo, are less expensive than others.
• Opt for an alternative: If your budget isn’t sufficient, you could consider looking for a cheaper alternative flooring option like sheet vinyl or linoleum.

Advertisement

THIS IS AN ADVERTISEMENT AND NOT EDITORIAL CONTENT. Please note that we do receive compensation for any products you buy or sign up to via this advertisement, and that compensation impacts the ranking and placement of any offers listed herein. We do not present information about every offer available. The information and savings numbers depicted above are for demonstration purposes only, and your results may vary.

Compare Quotes From Top-rated Local Flooring Contractors

Free, No-commitment Estimates

Find a Contractor

To arrive at the average costs in this article, editorial team members surveyed one provider, one blog and 10 cost databases on national and local levels. All averaged figures were correct at the time of publication and may be subject to change.

Frequently Asked Questions (FAQs)

How much does it cost to install 1,000 square feet of hardwood floors?

The cost of installing hardwood floors in a 1,000-square-foot area can vary widely based on a number of factors such as the type of wood, the quality of the materials, the complexity of the installation and the geographic location of the home. On average, homeowners can expect hardwood floor installation costs to range from $6,000 to $12,000 for a 1,000-square-foot home.

Are hardwood floors worth it?

Hardwood floors are generally considered to be a worthwhile investment, as they can add value to a home and are often preferred by homebuyers. They are durable, long-lasting and are relatively low maintenance when compared to other types of flooring. Additionally, hardwood floors offer a classic and timeless look that can fit with any decor style.

Is hardwood cheaper than carpet?

In general, carpet tends to be cheaper than hardwood. But while carpet will cost you less, it has a shorter life span too. You can expect to have to replace your carpet every 10 years. Hardwood flooring, however, can last, depending on the type of wood, up to 100 years. So, while it’s typically more expensive than carpet ,hardwood is a long-term investment that could even be enjoyed by the next generations.

Is it better to sell a house with carpet or hardwood?

In most cases, it is better and easier to sell a house with hardwood floors rather than carpet. Homebuyers typically find hardwood floors to be more appealing since they view them as a high-end flooring option that can increase the value of a home. Additionally, hardwood floors are generally easier to clean and maintain than carpets, which can be enticing for potential buyers.

Do wood floors increase home value?

Yes, hardwood floors can indeed increase the value of a home. They are a premium flooring option that can add an element of luxury to any home and they are, therefore, often preferred by many homebuyers. Additionally, hardwood floors can last for decades with proper maintenance, which can be an attractive feature for your potential buyers.

Your Home. Your Decisions. Our Support.

Get expert advice on your home, design tips, how much to pay for pros and hiring experts, delivered to you daily.

{{ newsletterState.emailErrorMsg }}

Thanks & Welcome to the Forbes Home Improvement Community!

{{ newsletterState. emailErrorMsg }}

I agree to receive the Forbes Home newsletter via e-mail. Please see our Privacy Policy for more information and details on how to opt out.

How Much Does Hardwood Flooring Cost? [2023 Data]

How Much Does Hardwood Flooring Cost? [2023 Data] | Angi

Normal range: $2,480 – $7,026

The average cost to install hardwood flooring is between $2,480 and $7,026, depending on the size of your room and quality of materials.

Photo: Woning Media / iStock / Getty Images Plus / Getty Images

Photo: Woning Media / iStock / Getty Images Plus / Getty Images

Adding hardwood floors to your space is an investment that can lead to major benefits. For one, it’s easier to care for and maintain than carpet—so parents can say goodbye to juice stains forever. It’s also more long-lasting than tile because it can be finished (and refinished!) time and time again. In most cases, it can serve your home for a lifetime.

See the price range for hardwood flooring in

your area

Normal range for U.S.

$2,480 – $7,026

• Average

• $4,721

• Low end

• $990

• high end

• $12,000

LOWHIGH

What Factors Influence the Cost of Installing Hardwood Flooring?

The cost to install hardwood flooring comes down to a handful of factors, including the type of wood you choose and the specific needs of your home.

Photo: Alesia Kazantceva / Unsplash

Room Size 

The national average cost to install hardwood flooring is $6 to $12 per square foot for both labor and material fees. For higher-end wood and larger spaces, like if you’re redoing your entire first floor in hardwood, you may pay more—possibly between $13 and $25 per square foot. In general, most projects end up costing between $2,490 to $6,760 total.

Here’s what you may pay depending on your home size and how much flooring you’re interested in replacing:

Amount of Flooring	Typical Cost Range
500 sq. ft.	$3,000 – $6,000
1,000 sq. ft.	$6,000 – $12,000
1,200 sq. ft.	$7,200 – $14,400
2,000 sq. ft.	$12,000 – $24,000

Type of Hardwood Flooring  

Your hardwood flooring material and installation costs will depend in part on the type of flooring you choose.

Type of Floor	Total Material and Installation Cost
Solid Hardwood	$5 – $28 per sq. ft.
Prefinished Hardwood	$6 – $12 per sq. ft.
Engineered Hardwood	$4.50 – $16 per sq. ft.
Genuine Parquet	$20 – $45 per sq. ft.
Faux Parquet	$7 – $15 per sq. ft.

Type of Wood   

Hardwood floors consist of many different tree species. Each type has a unique look and varies in hardness, performance, and price. Woods that are harder, more durable, or exotic tend to cost more. This includes red oak, Brazilian cherry, and hickory.

Wood Hardness

The harder a wood is, the more of an effort it takes to install. Expect hardwoods (think Brazilian walnut) to require more elbow grease than softwoods (pine).

Thickness

Hardwood is typically 3/4 inches, 5/16 inches, and 1/2 inches thick, though you can also find options in other thicknesses. Thicker flooring can cost a bit more than thinner floors. For instance, hardwood floors that are 5/16 inches thick can cost $2 to $5 per square foot, while planks that are 3/4 inches thick can cost up to $6.

Wood Grade

You’ll find that hardwood flooring products fall into categories or grades based on physical characteristics. Low-grade floors have a natural, rustic character with knots, color variations, and mineral streaks. These cost $6 to $18 per square foot installed. High-grade wood, or clear wood, has a more uniform look and color without imperfections. This tier costs $8 to $23 per square foot.

Width

Hardwood planks tend to be 5 inches wide or narrower. However, there are also wide plank formats that cost more, usually $4.50 to $18 per square foot for materials alone. You’ll need fewer boards to cover a floor with wide planks (6- to 12-inch-wide boards), so they can reduce labor costs.

Color and Grain 

Wood color varies dramatically across species. There are light and pale tones; warmer, medium tones; and rich, dark tones. Some darker exotic species tend to be more expensive.

You’ll also see price variations by cut. Plain-sawn planks with a wave-like pattern are the most affordable, while quarter-sawn planks have a straighter grain and are more expensive. One rare pattern is the highly linear grain of rift-sawn boards, which cost even more.

Labor

Most of the cost of wood flooring comes from materials, not labor. On average, labor only costs $3 to $6 per square foot. However, you may end up paying more for jobs that take longer. This includes installing planks that have to be finished on-site, patterns like herringbone and parquet, or installations in complex layouts with unique corners.

On the other hand, you may only spend $3 to $4 per square foot on labor when installing wide plank floors since they cover more area and take less time to put in.

Hardwood Flooring Cost by Type of Flooring

Hardwood flooring is actually a broad category that includes several different styles and patterns of flooring. Solid hardwood is the traditional type, but you’ll also find engineered wood and parquet flooring made from wood. Material and installation costs will vary depending on which one you choose.

Cost for Prefinished vs. Traditional Hardwood Flooring

Prefinished hardwood flooring is wood planks that have been finished before being installed, unlike traditional hardwood flooring, which is finished after installation. Opting for prefinished can cost between $6 and $12 per square foot. That might seem more expensive upfront, but it could actually save you money in the long run because finishing hardwood flooring on-site takes more time, which means more labor costs.

Adding the finishing after installation is also riskier because it’s a process that’s more likely to trap dust or debris on the surface of the wood. If the wood is finished beforehand, you don’t have to stress.

Cost for Engineered vs. Solid Hardwood Flooring

Engineered wood flooring is a more economical option than solid hardwood because it’s built from layers of hardwood and plywood rather than a single type. On the low end, it will cost between $4.50 and $9 per square foot. On the high end, you’ll pay between $9 and $16 per square foot.

Think twice before deciding on this style because it’s not as durable as solid hardwood, which can last a century if the hardwood flooring is properly cared for.

Genuine Parquet

This is another style that costs more because it takes a lot of time and care to install. True parquet hardwood flooring can cost between $20 and $45 per square foot, but parquet-style tiles deliver a similar sophisticated look at a fraction of that price—you’ll pay $7 to $15 per square foot and $15,000 on average to install faux parquet.

Hardwood Flooring Cost by Type of Wood Species 

There are many different types of wood to choose from, all with different costs.

Maple

Maple wood flooring is available in creamy white and warm red colors and will cost between $6.50 and $11 per square foot.

Pine

Pinewood flooring is among the more affordable options at $4.50 to $10 per square foot. It can have a light beige or golden color, but it also dents more easily than other varieties.

“Pine is a wonderful choice because it looks great, it’s lightweight, and it’s easy to install,” says Bob Tschudi, Angi Expert Review Board member and general contractor in Raleigh, NC. “The downside is that it dents easily, but you can also sand those dents out rather quickly. ”

Bamboo

You’ll pay between $5 and $11 per square foot for bamboo wood flooring. It’s pale yellow (and sometimes green), hard and durable, and, because bamboo regrows much faster than other trees, more sustainable.

White Ash

White ash wood flooring is available in either pale grey or light tan colors at $9 to $13 per square foot. It’s also extremely durable, hard to stain, and softer to the touch than most woods.

Hickory

Hickory can be found in many different colors and will cost between $6 to $13 per square foot.

Red Oak

As its name indicates, this type of wood is slightly red, and it has a tight, highly visible grain that’s great for adding texture to a space. You’ll pay $8 to $13 per square foot.

White Oak

White oak wood flooring is light in color but just as strong and textured as red oak. It will cost between $8 and $15 per square foot.

Brazilian Walnut

This option is dark and cozy, but definitely on the pricier side at $11 to $20 per square foot.

Additional Costs to Consider 

There are several other factors to consider when budgeting for new hardwood flooring. Consider whether your project will involve finishing your floors, repairing or replacing any existing flooring, or the removal of old surfaces like carpet.

Repair vs. Replace vs. Refinishing

If your current hardwood floors are in good shape with a few minor dents, dings, or gouges, you could refinish them. Refinishing hardwood floors costs about $3 to $8 per square foot. You can refinish solid hardwood multiple times, but engineered wood can only be refinished once or twice. Repairing or replacing individual boards costs more, but it’s still less costly than a new installation.

Carpet Removal

If you’re swapping carpet for wood floors, you’ll need to pay to have it removed. On average, the extra cost for carpet removal will be between $150 and $250. You can reduce your overall project cost by doing this step yourself.

Floor Joist Repairs 

When replacing an existing floor, you or your installer may discover mold, insect, or water damage to the joists below. Extensively rotted joists will need repairs before you install new floors. Signs of damage are creaky floors and doors that begin to stick. Subfloor repairs can cost an additional $500 to $800, while joist repairs will be an extra $40 to $60 per square foot.

Finishing and Coating

Finish refers to the protective coating applied to hardwood to extend its durability. Some hardwood comes prefinished for an extra $2 per square foot, reducing labor costs. Finishing unfinished wood after installation adds $2 to $7 per square foot in labor.

Additionally, there are different types of finish that vary in cost. For example, polyurethane finish costs less than a penetrating resin finish.

Wood Look Tile

While not technically wood, wood-look tile is an affordable option for anyone who’s not ready to commit to hardwood flooring. This type of tile is glazed and colored to resemble wood, and there’s no risk of it rotting or warping in humid areas, so it’s perfect for your bathroom remodel! You can expect it to cost between $15 and $20 per square foot and from $900 to $2,900 for a full project.

Herringbone Pattern

If you opt for a gorgeous herringbone pattern, none of the materials you need will change—but the amount of time the project takes and the overall cost will. Choosing this style can add an extra 30% to your final bill because of the extra care required for installation. Expect to pay $12 per square foot of any type of wood to have it arranged in this fashion.

How to Calculate Hardwood Flooring Costs 

To make sure the cost of your project doesn’t take you by surprise, you can make some simple calculations in advance to get low- and high-cost estimates. Start by measuring the square footage of your space, then add 5% to 10% to account for cuts you’ll make and waste material.

Next, multiply your result by the hardwood material price per square foot. If you haven’t chosen a hardwood product yet, use the average typical range of $6 to $12 to get the low and high end. Finally, add in the price of extra supplies like nails, moldings, and thresholds.

Cost to Install Hardwood Flooring Yourself

Most of the hardwood floor installation cost comes from materials rather than labor. Wood panels can cost $6 to $25 per square foot, whereas installation costs are $3 to $6 per square foot. Doing it yourself also requires certain tools that you might not already have, including a pneumatic flooring nailer, which can cost anywhere from $200 to $400.

DIY Hardwood Flooring Installation Cost vs. Hiring a Pro 

Because your DIY savings will be minimal, it’s best to hire a local wood floor installer to do the job right. Proper installation of traditional solid hardwood flooring requires training, equipment, and experience that most DIYers don’t have. Here are just a few things a pro will have experience with:

• Accounting for changing temperatures and humidity

• Installing vapor barriers for moisture protection

• Custom patterns and exotic hardwoods

• Manipulating around fireplaces, closets, counters, and cabinets

• Proper subfloor and slab preparation

• Measuring to provide space for glue or nails

• Joist repair

Improper installation can cause wood floors to crack, bow, warp, split, or shrink over time. You also risk damaging wiring or plumbing in the process. If you know the risks and feel up to the task, start with a more forgiving type of hardwood that’s easier to fix, such as engineered wood, floating floors, or click-and-lock tiles.

How to Save on Hardwood Flooring Costs 

There are plenty of ways to reduce the cost of hardwood flooring installation without sacrificing the quality of your floors. Here are a few tips:

• Think beyond looks: Install a less expensive wood species, grain, thickness, or grade.

• Refinish, don’t replace: It costs much less to restore hardwood than to replace it.

• Get multiple quotes: Get at least three contractor quotes to compare prices.

• Install prefinished wood: Trade higher up-front costs for lower labor costs.

• Rip up your own carpet: DIY carpet disposal is less risky and can help cut labor costs.

• DIY engineered wood: Engineered wood is simpler and less costly to install and repair.

• Break up the project: If you can’t afford to redo your whole house, start by installing new floors in one or two rooms.

Audrey Bruno contributed to this piece.

Frequently Asked Questions

Hardwood floors are expensive, but they are also incredibly durable and can last decades with proper care. Along with being long-lasting, hardwood floors can give you an incredible ROI—up to 55% on average. Most homeowners find hardwood floors worth the initial investment so keep that in mind when deciding which way to go.  

Hickory, red oak, white oak, and Brazilian walnut are among the most durable wood flooring options. Teakwood is extremely durable and known as one of the hardest woods. It will hold up against weather and sunlight, but it is costly and can be difficult to source. Keep durability in mind when installing floors for high-traffic areas in your home. 

Over time, hardwood floors can lose their shine, meaning you’ll need to refinish them. Refinishing not only keeps them looking great, but it protects your floors from scratches as well. You should refinish your hardwood floors every 10 to 20 years.

You also need to clean your hardwood floors regularly and use the right tools to do so. Hardwood and humidity don’t mix, so you should never wet mop or bleach your floor boards. Instead, sweep, dry mop, or vacuum the hardwood floors to keep them sparkling.

Ready to get a quote for your project?

Answer a few questions, compare reviews, and choose the pro you want.

Recommended Articles

• How to Prep Your Hardwood Floors for Refinishing

  By Lauren Wellbank • June 20, 2022

• 10 Green Flooring Options and Ideas for Your Next Home Renovation

  By Allie Ogletree • February 16, 2022

• Grades of Hardwood Flooring and What You Need to Know

  By Nick P. Cellucci • October 17, 2022

Parquet board – the best choice and prices in St. Petersburg!

FeaturesFeaturesThis parameter reflects the performance characteristics of the coating that are most important to you, for example, increased moisture resistance of parquet boards or the possibility of using it with underfloor heating.

All selected Any selected Heat treatment
brushing
Improved wood drying
Increased moisture resistance
Reinforced construction
Lightweight styling
Maximum environmental friendliness E1 E0
Increased scratch resistance
High noise absorption
Operation with underfloor heating

BrandBrand This parameter is relevant if you have already defined the most preferred brands for yourself. You can also exclude those manufacturers whose collections you do not want to consider for one reason or another.

Baltic Wood
BARLINEK
BOEN
TARKETT
Kindl
KARELIA
KJOPMANN
Ellett
POLARWOOD
Aberhof
Sinteros
Focus Floor
Parquet Plaque

Type of designType of designParquet board has several types. One-strip parquet imitates a massive board, two-strip parquet imitates piece parquet. Three-strip flooring is also a very popular type of flooring in Russia, which looks great in small spaces and has a low price. Less common are four-lane and multi-lane coatings.

single strip
two-lane
three-lane
multi-strip

By type of coatingBy type of coatingThe parquet board is factory-coated with a wear-resistant protective layer, which can be varnish or oil. Each of these coatings has its own advantages and disadvantages. In turn, the varnish is (semi) matte and glossy.

Varnish
Oil
Matt lacquer
Glossy varnish
Uncoated

Color paletteColor palette Here it is necessary to note those shades that seem most attractive and suitable for your interior. In order not to make a mistake with the choice of color, we advise you to order the samples you like at home, as the difference in the interior and lighting greatly affects color perception.

White
Beige
Pink beige
light gray
taupe
Dark grey
golden light
yellow-red
Red tree
Light brown
Dark brown
wenge
Black
Colored floor

Wood species Wood species The top layer of the parquet board is made of fine wood veneer, each of which has a characteristic natural pattern. . Also, tree species differ in terms of stability, hardness and color change under the influence of UV rays and simply over time.

Oak
Beech
Jatoba
Ash
Nut
wenge
Cherry
Merbau
Birch
Mahogany (sapele)
Dussia
Iroko
Bamboo
Teak
Sucupira
Zebrano
rosewood
Macassar
imbuia
Apple tree
Olive
Afzelia
Etimoe
Poplar
Moabi
Pink tree
Acacia
Maple
panga panga
paduk
Hickory
Nogal
Yarra

ChamferedChamferedThe bevel is the bevel of the end edge of the board, after laying it forms small depressions at the junction of the lamellas. The chamfer is both a decorative and functional element that increases the resistance of the parquet to temperature and humidity changes, which means it preserves the original appearance of the coating and prolongs its service life.

Chamfered
Without chamfer

Country of manufacture Country of manufacture This parameter allows you to select the country of manufacture. I would like to note that the best collections presented in our store are produced by Finnish (Karelia, Timberwise), German (HARO), Belgian (Quick Step, Par-ky), Polish (Baltic Wood, Barlinek) and Swedish (Kahrs) brands.

Austria
Belgium
Germany
Lithuania
Malaysia
Norway
Poland
Russia
Serbia
Ukraine
Finland
France
Czech
Sweden

Price per m ²

from
up to

Parquet board: price per 1 sq. meter

NewMix company offers to buy parquet board for decorating living rooms, offices, reception rooms, conference rooms and other public spaces. In our online store you can order natural wood flooring inexpensively, with delivery in Moscow and lifting to the floor.

The price per square meter of a real parquet board is only slightly higher than that of a laminate. Wooden parquet sets the mood for any interior. A variety of wood species, textures and shades, combined with dozens of types of cuts and final processing, creates a huge selection of plank floors for every taste. Modern collections include reinforced parquet options that are suitable for laying in gyms.

Main characteristics

In the NewMix catalog you can choose parquet according to a specific parameter. When choosing a parquet board, pay attention to the following properties:

• Top layer thickness. It is determined by the material: natural veneer does not exceed 0.6-0.7 mm in thickness, processed array of valuable varieties can reach 6 mm in thickness.
• Number of strips. The top layer consists either of a single die, or of two or three wooden dies connected on an adhesive basis. Parquet in one strip is more expensive, it is better protected from cracking, the design matches the massive board. Two- and three-strip parquet is perfect for living spaces.
• Types of wood. The upper layer is formed from valuable rocks. Wood determines the texture, color and aesthetic properties of the floor. Design is also influenced by selection: incorporating wood with knots, cracks, and other imperfections won’t produce an even texture, but will provide an interesting effect.
• Middle layer – can be 100% wooden or with HDF-layer, which allows to keep its shape better under loads and to combine parquet with “warm floor” technology.